FCC ID XM2-LOWPOWER

OPTICAL SYSTEMS

by Teko Telecom Srl

Grantee Code: XM2   Product Code: LOWPOWER
Latest application date: 2010-11-24

FCC ID Device Details

FCC IDXM2-LOWPOWER
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXM2
Product CodeLOWPOWER
Applicant BusinessTeko Telecom Srl 🇮🇹
Related Domains tekotelecom.it
Equipment ClassOPTICAL SYSTEMS

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
806-824 MHzClass II permissive change or modification of presently authorized equipment2010-11-24
1850-1915 MHzClass II permissive change or modification of presently authorized equipment2010-11-24
1850-1915 MHzOriginal Equipment2010-03-25
806-824 MHzOriginal Equipment2010-03-25

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2010-03-25PDF 1.3 MB
External photosExternal Photos2010-03-25PDF 1.3 MB
Label and Label LocationID Label/Location Info2010-03-25PDF 216 KB
Label and Label location infoID Label/Location Info2010-03-25PDF 216 KB
Test Setup PhotosTest Setup Photos2010-03-25PDF 84.1 KB
Test setup PhotosTest Setup Photos2010-03-25PDF 84.1 KB
test reportTest Report2010-11-24PDF 4.2 MB
test reportTest Report2010-11-24PDF 5 MB
Test ReportTest Report2010-03-25PDF 1.9 MB
Test ReportTest Report2010-03-25PDF 3.2 MB
Test reportTest Report2010-03-25PDF 3.9 MB
changes letterCover Letter(s)2010-11-24PDF 63.2 KB
confidential letterCover Letter(s)2010-11-24PDF 68.4 KB
Cover lettersCover Letter(s)2010-03-25PDF 93.1 KB
Part ListParts List/Tune Up Info2010-03-25PDF 150.3 KB
Part listParts List/Tune Up Info2010-03-25PDF 150.3 KB
RF Exposure infoRF Exposure Info2010-03-25PDF 55.7 KB
RF exposure infoRF Exposure Info2010-03-25PDF 55.7 KB

Application Information

Application ID1sOSiPaxX0aUnLkByOnWwg==
Final Action Date2010-11-24
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0018963462
Model-LOWPOWER
Frequency Range806-824 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionOPTICAL SYSTEMS
Responsible PartyAlessandro Brunelli, Certification Engineer, alessandro.brunelli@tekotelecom.it , +39 051 6946811
Technical ContactMASSIMO NOTARGIACOMO, TEKO TELECOM, massimo.notargiacomo@tekotelecom.it , +39 051 6946811
Non-Technical ContactMARCO DELLA MORA, TEKO TELECOM, marco.dellamora@tekotelecom.it , +39 051 6946811
TCB Emailstuart.beck@nemko.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSignal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

Applications

Application IDDatePurpose
1sOSiPaxX0aUnLkByOnWwg==2010-11-24Class II permissive change or modification of presently authorized equipment
0ZGZu0+xT90XEnuC7TcnYQ==2010-11-24Class II permissive change or modification of presently authorized equipment
NmWt/zJQxx6hWa2Mha08ng==2010-03-25Original Equipment
1vdy3Sm8AWrfDwMVPM8xBA==2010-03-25Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
806-824 MHz0.0025AmpD7W9
824-849 MHz0.0025AmpD7W22H
824-849 MHz0.0025AmpF9W22H
824-849 MHz0.0025AmpGXW22H
824-849 MHz0.0025AmpDXW22H
824-849 MHz0.0025AmpG7W22H
851-869 MHz0.8AmpD7W9
869-894 MHz0.8AmpGXW22H
869-894 MHz0.8AmpDXW22H
869-894 MHz0.8AmpG7W22H
869-894 MHz0.8AmpD7W22H
1710-1755 MHz0.0025AmpF9W27
1710-1755 MHz0.0025AmpD7W27
1850-1915 MHz0.0025AmpG7W24E
1850-1915 MHz0.0025AmpGXW24E
1850-1915 MHz0.0025AmpD7W24E
1850-1915 MHz0.0025AmpDXW24E
1930-1995 MHz0.8AmpG7W24E
1930-1995 MHz0.8AmpGXW24E
1930-1995 MHz0.8AmpD7W24E
1930-1995 MHz0.8AmpDXW24E
2110-2155 MHz0.8AmpF9W27
2110-2155 MHz0.8AmpD7W27

Grants

TCB Grant - Application NmWt/zJQxx6hWa2Mha08ng==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 03/25/2010

Application Dated: 03/19/2010
Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-LOWPOWER
Name of Grantee:  Teko Telecom Srl
Equipment Class: PCS Licensed Transmitter
Notes: Optical Systems Remote Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.0  -  1915.0 0.0025  Amp G7W
24E 1850.0  -  1915.0 0.0025  Amp GXW
24E 1930.0  -  1995.0 0.8  Amp G7W
24E 1930.0  -  1995.0 0.8  Amp GXW

Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

EAS Grant - Application NmWt/zJQxx6hWa2Mha08ng==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy
  Date of Grant: 03/25/2010

Application Dated: 03/19/2010
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-LOWPOWER
Name of Grantee:  Teko Telecom Srl
Equipment Class: PCS Licensed Transmitter
Notes: Optical Systems Remote Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.0  -  1915.0 0.0025  Amp G7W
24E 1850.0  -  1915.0 0.0025  Amp GXW
24E 1930.0  -  1995.0 0.8  Amp G7W
24E 1930.0  -  1995.0 0.8  Amp GXW

Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).



TCB Grant - Application 1vdy3Sm8AWrfDwMVPM8xBA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 03/25/2010

Application Dated: 03/19/2010
Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-LOWPOWER
Name of Grantee:  Teko Telecom Srl
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Optical Systems Remote Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 869.0  -  894.0 0.8  Amp F9W
22H 869.0  -  894.0 0.8  Amp GXW
22H 869.0  -  894.0 0.8  Amp DXW
22H 869.0  -  894.0 0.8  Amp G7W
22H 824.0  -  849.0 0.0025  Amp F9W
22H 824.0  -  849.0 0.0025  Amp GXW
22H 824.0  -  849.0 0.0025  Amp DXW
22H 824.0  -  849.0 0.0025  Amp G7W
27 1710.0  -  1755.0 0.0025  Amp F9W
27 2110.0  -  2155.0 0.8  Amp F9W
90 806.0  -  824.0 0.0025  Amp D7W
90 851.0  -  869.0 0.8  Amp D7W

Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).


EAS Grant - Application 1vdy3Sm8AWrfDwMVPM8xBA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy
  Date of Grant: 03/25/2010

Application Dated: 03/19/2010
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-LOWPOWER
Name of Grantee:  Teko Telecom Srl
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Optical Systems Remote Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 869.0  -  894.0 0.8  Amp F9W
22H 869.0  -  894.0 0.8  Amp GXW
22H 869.0  -  894.0 0.8  Amp DXW
22H 869.0  -  894.0 0.8  Amp G7W
22H 824.0  -  849.0 0.0025  Amp F9W
22H 824.0  -  849.0 0.0025  Amp GXW
22H 824.0  -  849.0 0.0025  Amp DXW
22H 824.0  -  849.0 0.0025  Amp G7W
27 1710.0  -  1755.0 0.0025  Amp F9W
27 2110.0  -  2155.0 0.8  Amp F9W
90 806.0  -  824.0 0.0025  Amp D7W
90 851.0  -  869.0 0.8  Amp D7W

Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).



TCB Grant - Application 1sOSiPaxX0aUnLkByOnWwg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 11/24/2010

Application Dated: 11/24/2010
Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-LOWPOWER
Name of Grantee:  Teko Telecom Srl
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: OPTICAL SYSTEMS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 869.0  -  894.0 0.8  Amp F9W
22H 869.0  -  894.0 0.8  Amp GXW
22H 869.0  -  894.0 0.8  Amp DXW
22H 869.0  -  894.0 0.8  Amp G7W
22H 869.0  -  894.0 0.8  Amp D7W
22H 824.0  -  849.0 0.0025  Amp F9W
22H 824.0  -  849.0 0.0025  Amp GXW
22H 824.0  -  849.0 0.0025  Amp DXW
22H 824.0  -  849.0 0.0025  Amp G7W
22H 824.0  -  849.0 0.0025  Amp D7W
27 2110.0  -  2155.0 0.8  Amp F9W
27 2110.0  -  2155.0 0.8  Amp D7W
27 1710.0  -  1755.0 0.0025  Amp F9W
27 1710.0  -  1755.0 0.0025  Amp D7W
90 851.0  -  869.0 0.8  Amp D7W
90 806.0  -  824.0 0.0025  Amp D7W

Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

EAS Grant - Application 1sOSiPaxX0aUnLkByOnWwg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy
  Date of Grant: 11/24/2010

Application Dated: 11/24/2010
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-LOWPOWER
Name of Grantee:  Teko Telecom Srl
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: OPTICAL SYSTEMS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 869.0  -  894.0 0.8  Amp F9W
22H 869.0  -  894.0 0.8  Amp GXW
22H 869.0  -  894.0 0.8  Amp DXW
22H 869.0  -  894.0 0.8  Amp G7W
22H 869.0  -  894.0 0.8  Amp D7W
22H 824.0  -  849.0 0.0025  Amp F9W
22H 824.0  -  849.0 0.0025  Amp GXW
22H 824.0  -  849.0 0.0025  Amp DXW
22H 824.0  -  849.0 0.0025  Amp G7W
22H 824.0  -  849.0 0.0025  Amp D7W
27 2110.0  -  2155.0 0.8  Amp F9W
27 2110.0  -  2155.0 0.8  Amp D7W
27 1710.0  -  1755.0 0.0025  Amp F9W
27 1710.0  -  1755.0 0.0025  Amp D7W
90 851.0  -  869.0 0.8  Amp D7W
90 806.0  -  824.0 0.0025  Amp D7W

Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).



TCB Grant - Application 0ZGZu0+xT90XEnuC7TcnYQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 11/24/2010

Application Dated: 11/24/2010
Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-LOWPOWER
Name of Grantee:  Teko Telecom Srl
Equipment Class: PCS Licensed Transmitter
Notes: OPTICAL SYSTEMS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1930.0  -  1995.0 0.8  Amp G7W
24E 1930.0  -  1995.0 0.8  Amp GXW
24E 1930.0  -  1995.0 0.8  Amp D7W
24E 1930.0  -  1995.0 0.8  Amp DXW
24E 1850.0  -  1915.0 0.0025  Amp G7W
24E 1850.0  -  1915.0 0.0025  Amp GXW
24E 1850.0  -  1915.0 0.0025  Amp D7W
24E 1850.0  -  1915.0 0.0025  Amp DXW

Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

EAS Grant - Application 0ZGZu0+xT90XEnuC7TcnYQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy
  Date of Grant: 11/24/2010

Application Dated: 11/24/2010
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-LOWPOWER
Name of Grantee:  Teko Telecom Srl
Equipment Class: PCS Licensed Transmitter
Notes: OPTICAL SYSTEMS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1930.0  -  1995.0 0.8  Amp G7W
24E 1930.0  -  1995.0 0.8  Amp GXW
24E 1930.0  -  1995.0 0.8  Amp D7W
24E 1930.0  -  1995.0 0.8  Amp DXW
24E 1850.0  -  1915.0 0.0025  Amp G7W
24E 1850.0  -  1915.0 0.0025  Amp GXW
24E 1850.0  -  1915.0 0.0025  Amp D7W
24E 1850.0  -  1915.0 0.0025  Amp DXW

Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).



Mail To: