FCC ID XM2-EP7FL8P

XM2EP7FL8P, XM2 EP7FL8P, XM2-EP7FL8P

Teko Telecom Srl Remote Unit Enhanced Power EP7FL8P

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: XM2-EP7FL8P is XM2. The remaining characters of the FCC ID, -EP7FL8P, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Remote Unit Enhanced Power

Application: Remote Unit Enhanced Power
Equipment Class: B9B - Part 90 Class B Industrial Booster (non-SMR)
Short Link: fcc.id/XM2-EP7FL8P
Sources: FCC.gov | FCC.report
Registered By: Teko Telecom Srl - XM2 (Italy)

App #	Purpose	Date	Unique ID
1	Original Equipment	2016-04-21	ZMX7iS6nCQhZ7mhZj/9Muw==

Operating Frequencies

Colombia Homologation [?]: XM2-EP7FL8P

Device operates within approved frequencies overlapping with the following cellular bands: CDMA 10,Sec 800 MHz DOWN | LTE 20,800 DD UP | UMTS CH 20 UP |

Frequency Range	Power Output	Tolerance	Emission Designator	Rule Parts	Grant Notes	Line Entry
758-768 MHz	1.25 Watts	Amp	D7W	9	PF	1
769-775 MHz	1.25 Watts	Amp	F1E	9		2
769-775 MHz	1.25 Watts	Amp	F1D	9		3
769-775 MHz	1.25 Watts	Amp	F3E	9		4
851-862 MHz	1.25 Watts	Amp	F1E	9		5
851-862 MHz	1.25 Watts	Amp	F1D	9		6
851-862 MHz	1.25 Watts	Amp	F3E	9		7

Exhibits

Document	Type	Submitted Available
Test Report	Test Report Adobe Acrobat PDF (1580 kB)	2016-04-21 2016-04-21
RF Exposure	RF Exposure Info Adobe Acrobat PDF (31 kB)	2016-04-21 2016-04-21
Label	ID Label/Location Info Adobe Acrobat PDF (707 kB)	2016-04-21 2016-04-21
External Photos	External Photos Adobe Acrobat PDF (546 kB)	2016-04-21 2016-04-21
Attestation	Cover Letter(s) Adobe Acrobat PDF (230 kB)	2016-04-21 2016-04-21
Confidentiality	Cover Letter(s) Adobe Acrobat PDF (561 kB)	2016-04-21 2016-04-21
Authority to Act as Agent	Cover Letter(s) Adobe Acrobat PDF (288 kB)	2016-04-21 2016-04-21
Schematics	Schematics Adobe Acrobat PDF (3343 kB)	2016-04-21
Tune Up Info	Parts List/Tune Up Info Adobe Acrobat PDF (230 kB)	2016-04-21
Internal Photos	Internal Photos Adobe Acrobat PDF (1204 kB)	2016-04-21
Operational Description	Operational Description Adobe Acrobat PDF (392 kB)	2016-04-21
Block Diagram	Block Diagram Adobe Acrobat PDF (234 kB)	2016-04-21
User Manual	Users Manual Adobe Acrobat PDF (4162 kB)	2016-04-21
Parts List	Parts List/Tune Up Info Adobe Acrobat PDF (386 kB)	2016-04-21

Application Forms

1 (2016-04-21)

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Teko Telecom Srl
FCC Registration Number (FRN):	0018963462
Alphanumeric FCC ID:	XM2EP7FL8P
Unique Application Identifier:	ZMX7iS6nCQhZ7mhZj/9Muw==
Line one:	Via Meucci 24/A
City:	Castel San Pietro Terme BO
State:	N/A
Country:	Italy
Zip Code:	40024

TCB Information

TCB Application Email Address:	stuart.beck@nemko.com
TCB Scope:	B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID

Grantee Code:	XM2
Product Code:	-EP7FL8P

Person at the applicant's address to receive grant or for contact

Name:	Alessandro Brunelli
Title:	Certification Engineer

Telephone Number:

+39 051 6946811

Extension:

Fax Number:	+39 051 948473
Email:	alessandro.brunelli@tekotelecom.it

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: B9B - Part 90 Class B Industrial Booster (non-SMR)
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	Remote Unit Enhanced Power

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Does not apply

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: Nemko SpA

First Name: Ralph

Last Name: Spanevello

Telephone Number:

39-0392201201

Extension:

Fax Number: 39-0392201221

E-mail: ralph.spanevello@nemko.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power output conducted and is the composite for multi-channel operation. This transmitter operates as a remote unit as part of a system along with host/master unit components as described in this filing and excluding any other devices connected to the (uplink) output terminal of the master unit. This application covers only the system configuration with host/master unit connected to a base station in the uplink path; operations if any with host/master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. The antenna(s) used for this transmitter must be fixed-mounted on outdoor/indoor permanent structures with a separation distance from all persons during normal operation as documented in this filing. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of § 1.1307(b)(3).

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Alesandro Brunelli

Title of authorized signature: Certification Engineer

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada

Date of Grant: 04/21/2016

Application Dated: 04/21/2016

Teko Telecom Srl

Via Meucci 24/A

Castel San Pietro Terme BO, 40024
Italy

Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XM2-EP7FL8P

Name of Grantee:	Teko Telecom Srl

Equipment Class:	Part 90 Class B Industrial Booster (non-SMR)
Notes:	Remote Unit Enhanced Power

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
PF	90	758.0 - 768.0	1.25	Amp	D7W
	90	769.0 - 775.0	1.25	Amp	F1E
	90	769.0 - 775.0	1.25	Amp	F1D
	90	769.0 - 775.0	1.25	Amp	F3E
	90	851.0 - 862.0	1.25	Amp	F1E
	90	851.0 - 862.0	1.25	Amp	F1D
	90	851.0 - 862.0	1.25	Amp	F3E

Power output conducted and is the composite for multi-channel operation. This transmitter operates as a remote unit as part of a system along with host/master unit components as described in this filing and excluding any other devices connected to the (uplink) output terminal of the master unit. This application covers only the system configuration with host/master unit connected to a base station in the uplink path; operations if any with host/master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. The antenna(s) used for this transmitter must be fixed-mounted on outdoor/indoor permanent structures with a separation distance from all persons during normal operation as documented in this filing. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of § 1.1307(b)(3).

PF:	Transmitter approved for Public Safety Broadband

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy