FCC ID XM2-VHPA

XM2VHPA, XM2 VHPA, XM2-VHPA

Teko Telecom Srl Very High Power Amplifier VHPA

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: XM2-VHPA is XM2. The remaining characters of the FCC ID, -VHPA, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Very High Power Amplifier

App # Purpose Date Unique ID
1 Original Equipment 2012-07-10 mA1nxHNtwfVQD46IYJoGuw==
2 Original Equipment 2012-07-10 QCnuanz+mD8YVQhRpFo7rg==
3 Original Equipment 2015-07-27 9++hiTaH2T0T0xW31O2ldA==
4 Class II Permissive Change 2015-07-30 wALwok40TmXykbTNeOgYqA==
5 Class II Permissive Change 2015-07-30 PbhhoAVULGcqvEHZvnW6MQ==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: LTE 1,2100 DOWN | LTE 10,AWS-1+ DOWN | LTE 4,AWS-1 DOWN | LTE 65,2100+ DOWN | LTE 66,AWS-3 DOWN | UMTS CH 1 DOWN | UMTS CH 10 DOWN | UMTS CH 4 DOWN |
Frequency RangePower OutputToleranceEmission DesignatorRule Parts App #
698-716 MHz2.5 mWAmpD7W27 1.15
698-716 MHz2.5 mWAmpD7W27 5.16
728-746 MHz20 WattsAmpD7W27 1.16
728-746 MHz20 WattsAmpD7W27 5.15
746-757 MHz20 WattsAmpD7W27 1.17
746-757 MHz20 WattsAmpD7W27 5.17
776-787 MHz2.5 mWAmpD7W27 1.18
776-787 MHz2.5 mWAmpD7W27 5.18
806-824 MHz2.5 mWAmpD7W9 1.13
806-824 MHz2.5 mWAmpD7W9 5.14
824-849 MHz2.5 mWAmpF9W22H 1.5
824-849 MHz2.5 mWAmpGXW22H 1.6
824-849 MHz2.5 mWAmpDXW22H 1.7
824-849 MHz2.5 mWAmpD7W22H 1.8
824-849 MHz2.5 mWAmpF9W22H 5.5
824-849 MHz2.5 mWAmpGXW22H 5.6
824-849 MHz2.5 mWAmpDXW22H 5.7
824-849 MHz2.5 mWAmpD7W22H 5.8
851-862 MHz20 WattsAmpD7W9 3.1
851-862 MHz20 WattsAmpF3E9 3.2
851-869 MHz20 WattsAmpD7W9 1.14
851-869 MHz20 WattsAmpD7W9 5.13
869-894 MHz20 WattsAmpDXW22H 1.3
869-894 MHz20 WattsAmpD7W22H 1.4
869-894 MHz20 WattsAmpDXW22H 5.3
869-894 MHz20 WattsAmpD7W22H 5.4
896-901 MHz2.5 mWAmpD7W9 1.19
896-901 MHz2.5 mWAmpD7W9 5.2
901-902 MHz2.5 mWAmpD7W24D 2.9
901-902 MHz2.5 mWAmpD7W24D 4.1
935-940 MHz20 WattsAmpD7W9 3.3
935-940 MHz20 WattsAmpD7W9 1.2
935-940 MHz20 WattsAmpD7W9 5.19
940-941 MHz20 WattsAmpD7W24D 2.1
940-941 MHz20 WattsAmpD7W24D 4.9
1.71-1.755 GHz2.5 mWAmpF9W27 1.11
1.71-1.755 GHz2.5 mWAmpD7W27 1.12
1.71-1.755 GHz2.5 mWAmpF9W27 5.11
1.71-1.755 GHz2.5 mWAmpD7W27 5.12
1.85-1.915 GHz2.5 mWAmpF9W24E 2.5
1.85-1.915 GHz2.5 mWAmpD7W24E 2.6
1.85-1.915 GHz2.5 mWAmpGXW24E 2.7
1.85-1.915 GHz2.5 mWAmpDXW24E 2.8
1.85-1.915 GHz2.5 mWAmpF9W24E 4.5
1.85-1.915 GHz2.5 mWAmpD7W24E 4.6
1.85-1.915 GHz2.5 mWAmpGXW24E 4.7
1.85-1.915 GHz2.5 mWAmpDXW24E 4.8
1.93-1.995 GHz20 WattsAmpD7W24E 2.2
1.93-1.995 GHz20 WattsAmpGXW24E 2.3
1.93-1.995 GHz20 WattsAmpDXW24E 2.4
1.93-1.995 GHz20 WattsAmpD7W24E 4.2
1.93-1.995 GHz20 WattsAmpGXW24E 4.3
1.93-1.995 GHz20 WattsAmpDWX24E 4.4
2.11-2.155 GHz20 WattsAmpD7W27 1.1
2.11-2.155 GHz20 WattsAmpF9W27 1.9
2.11-2.155 GHz20 WattsAmpD7W27 5.1
2.11-2.18 GHz20 WattsAmpF9W27 5.21
2.11-2.18 GHz20 WattsAmpD7W27 5.22
2.11-2.155 GHz20 WattsAmpF9W27 5.9

Exhibits

Available Exhibits

App #Document Type Submitted
Available
5 Test ReportTest Report
Adobe Acrobat PDF (2325 kB)		 2015-07-28
2015-07-30
5 LabelID Label/Location Info
Adobe Acrobat PDF (1716 kB)		 2015-07-28
2015-07-30
5 AttestationCover Letter(s)
Adobe Acrobat PDF (228 kB)		 2015-07-28
2015-07-30
5 C2PC LetterCover Letter(s)
Adobe Acrobat PDF (373 kB)		 2015-07-28
2015-07-30
5 ConfidentialityCover Letter(s)
Adobe Acrobat PDF (559 kB)		 2015-07-28
2015-07-30
5 Authority to Act as AgentCover Letter(s)
Adobe Acrobat PDF (285 kB)		 2015-07-28
2015-07-30
4 Label and locationID Label/Location Info
Adobe Acrobat PDF (1716 kB)		 2015-07-27
2015-07-30
4 AttestationCover Letter(s)
Adobe Acrobat PDF (228 kB)		 2015-07-27
2015-07-30
4 C2PC LetterCover Letter(s)
Adobe Acrobat PDF (373 kB)		 2015-07-27
2015-07-30
4 ConfidentialityCover Letter(s)
Adobe Acrobat PDF (559 kB)		 2015-07-27
2015-07-30
4 Authority to Act as AgentCover Letter(s)
Adobe Acrobat PDF (285 kB)		 2015-07-27
2015-07-30
3 label and locationID Label/Location Info
Adobe Acrobat PDF (1146 kB)		 2015-07-02
2015-07-27
3 test report SMR900Test Report
Adobe Acrobat PDF (786 kB)		 2015-07-02
2015-07-27
3 test report SMR800Test Report
Adobe Acrobat PDF (1081 kB)		 2015-07-02
2015-07-27
3 RF Exposure Info MPERF Exposure Info
Adobe Acrobat PDF (23 kB)		 2015-07-02
2015-07-27
3 internal photosInternal Photos
Adobe Acrobat PDF (1579 kB)		 2015-07-02
2015-07-27
3 external photosExternal Photos
Adobe Acrobat PDF (389 kB)		 2015-07-02
2015-07-27
3 FCC warning statementsCover Letter(s)
Adobe Acrobat PDF (228 kB)		 2015-07-02
2015-07-27
3 confidential letterCover Letter(s)
Adobe Acrobat PDF (559 kB)		 2015-07-02
2015-07-27
3 agent letterCover Letter(s)
Adobe Acrobat PDF (285 kB)		 2015-07-02
2015-07-27
1 RF Exposure infoRF Exposure Info
Adobe Acrobat PDF (23 kB)		 2012-07-05
2012-07-10
2 RF Exposure infoRF Exposure Info
Adobe Acrobat PDF (23 kB)		 2012-07-05
2012-07-10
1 Test ReportTest Report
Adobe Acrobat PDF (4796 kB)		 2012-07-05
2012-07-10
1 Users ManualUsers Manual
Adobe Acrobat PDF (3378 kB)		 2012-07-05
2012-07-10
1 Test Setup PhotosTest Setup Photos
Adobe Acrobat PDF (662 kB)		 2012-07-05
2012-07-10
1 Part ListParts List/Tune Up Info
Adobe Acrobat PDF (278 kB)		 2012-07-05
2012-07-10
1 Operational DescriptionOperational Description
Adobe Acrobat PDF (372 kB)		 2012-07-05
2012-07-10
1 Internal photosInternal Photos
Adobe Acrobat PDF (1579 kB)		 2012-07-05
2012-07-10
1 Label and Label LocationID Label/Location Info
Adobe Acrobat PDF (667 kB)		 2012-07-05
2012-07-10
1 External PhotosExternal Photos
Adobe Acrobat PDF (389 kB)		 2012-07-05
2012-07-10
1 Cover LettersCover Letter(s)
Adobe Acrobat PDF (244 kB)		 2012-07-05
2012-07-10
2 Test ReportTest Report
Adobe Acrobat PDF (4909 kB)		 2012-07-05
2012-07-10
2 Users ManualUsers Manual
Adobe Acrobat PDF (3378 kB)		 2012-07-05
2012-07-10
2 Test Setup InfoTest Setup Photos
Adobe Acrobat PDF (662 kB)		 2012-07-05
2012-07-10
2 Part listParts List/Tune Up Info
Adobe Acrobat PDF (278 kB)		 2012-07-05
2012-07-10
2 Operational DescriptionOperational Description
Adobe Acrobat PDF (372 kB)		 2012-07-05
2012-07-10
2 Internal photosInternal Photos
Adobe Acrobat PDF (1579 kB)		 2012-07-05
2012-07-10
2 Label and Label LocationID Label/Location Info
Adobe Acrobat PDF (667 kB)		 2012-07-05
2012-07-10
2 External PhotosExternal Photos
Adobe Acrobat PDF (389 kB)		 2012-07-05
2012-07-10
2 Cover lettersCover Letter(s)
Adobe Acrobat PDF (244 kB)		 2012-07-05
2012-07-10

APP # 5 (2015-07-30)

App # Document Type Submitted
Available
5 Test Report Test Report
Adobe Acrobat PDF (2325 kB)		 2015-07-28 00:00:00
2015-07-30 00:00:00
5 Label ID Label/Location Info
Adobe Acrobat PDF (1716 kB)		 2015-07-28 00:00:00
2015-07-30 00:00:00
5 Attestation Cover Letter(s)
Adobe Acrobat PDF (228 kB)		 2015-07-28 00:00:00
2015-07-30 00:00:00
5 C2PC Letter Cover Letter(s)
Adobe Acrobat PDF (373 kB)		 2015-07-28 00:00:00
2015-07-30 00:00:00
5 Confidentiality Cover Letter(s)
Adobe Acrobat PDF (559 kB)		 2015-07-28 00:00:00
2015-07-30 00:00:00
5 Authority to Act as Agent Cover Letter(s)
Adobe Acrobat PDF (285 kB)		 2015-07-28 00:00:00
2015-07-30 00:00:00

APP # 4 (2015-07-30)

App # Document Type Submitted
Available
4 Label and location ID Label/Location Info
Adobe Acrobat PDF (1716 kB)		 2015-07-27 00:00:00
2015-07-30 00:00:00
4 Attestation Cover Letter(s)
Adobe Acrobat PDF (228 kB)		 2015-07-27 00:00:00
2015-07-30 00:00:00
4 C2PC Letter Cover Letter(s)
Adobe Acrobat PDF (373 kB)		 2015-07-27 00:00:00
2015-07-30 00:00:00
4 Confidentiality Cover Letter(s)
Adobe Acrobat PDF (559 kB)		 2015-07-27 00:00:00
2015-07-30 00:00:00
4 Authority to Act as Agent Cover Letter(s)
Adobe Acrobat PDF (285 kB)		 2015-07-27 00:00:00
2015-07-30 00:00:00

APP # 3 (2015-07-27)

App # Document Type Submitted
Available
3 label and location ID Label/Location Info
Adobe Acrobat PDF (1146 kB)		 2015-07-02 00:00:00
2015-07-27 00:00:00
3 test report SMR900 Test Report
Adobe Acrobat PDF (786 kB)		 2015-07-02 00:00:00
2015-07-27 00:00:00
3 test report SMR800 Test Report
Adobe Acrobat PDF (1081 kB)		 2015-07-02 00:00:00
2015-07-27 00:00:00
3 RF Exposure Info MPE RF Exposure Info
Adobe Acrobat PDF (23 kB)		 2015-07-02 00:00:00
2015-07-27 00:00:00
3 internal photos Internal Photos
Adobe Acrobat PDF (1579 kB)		 2015-07-02 00:00:00
2015-07-27 00:00:00
3 external photos External Photos
Adobe Acrobat PDF (389 kB)		 2015-07-02 00:00:00
2015-07-27 00:00:00
3 FCC warning statements Cover Letter(s)
Adobe Acrobat PDF (228 kB)		 2015-07-02 00:00:00
2015-07-27 00:00:00
3 confidential letter Cover Letter(s)
Adobe Acrobat PDF (559 kB)		 2015-07-02 00:00:00
2015-07-27 00:00:00
3 agent letter Cover Letter(s)
Adobe Acrobat PDF (285 kB)		 2015-07-02 00:00:00
2015-07-27 00:00:00

APP # 1 (2012-07-10)

App # Document Type Submitted
Available
1 RF Exposure info RF Exposure Info
Adobe Acrobat PDF (23 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00

APP # 2 (2012-07-10)

App # Document Type Submitted
Available
2 RF Exposure info RF Exposure Info
Adobe Acrobat PDF (23 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00

APP # 1 (2012-07-10)

App # Document Type Submitted
Available
1 Test Report Test Report
Adobe Acrobat PDF (4796 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
1 Users Manual Users Manual
Adobe Acrobat PDF (3378 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
1 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (662 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
1 Part List Parts List/Tune Up Info
Adobe Acrobat PDF (278 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
1 Operational Description Operational Description
Adobe Acrobat PDF (372 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
1 Internal photos Internal Photos
Adobe Acrobat PDF (1579 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
1 Label and Label Location ID Label/Location Info
Adobe Acrobat PDF (667 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
1 External Photos External Photos
Adobe Acrobat PDF (389 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
1 Cover Letters Cover Letter(s)
Adobe Acrobat PDF (244 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00

APP # 2 (2012-07-10)

App # Document Type Submitted
Available
2 Test Report Test Report
Adobe Acrobat PDF (4909 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
2 Users Manual Users Manual
Adobe Acrobat PDF (3378 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
2 Test Setup Info Test Setup Photos
Adobe Acrobat PDF (662 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
2 Part list Parts List/Tune Up Info
Adobe Acrobat PDF (278 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
2 Operational Description Operational Description
Adobe Acrobat PDF (372 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
2 Internal photos Internal Photos
Adobe Acrobat PDF (1579 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
2 Label and Label Location ID Label/Location Info
Adobe Acrobat PDF (667 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
2 External Photos External Photos
Adobe Acrobat PDF (389 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00
2 Cover letters Cover Letter(s)
Adobe Acrobat PDF (244 kB)		 2012-07-05 00:00:00
2012-07-10 00:00:00

APP # 5 (2015-07-30)

App # Document Type Submitted
Available
5 External Photos External Photos
Adobe Acrobat PDF (389 kB)		 2015-07-28 00:00:00
2015-07-30 00:00:00
5 User Manual Users Manual
Adobe Acrobat PDF (5659 kB)		 2015-07-28 00:00:00
N/A

APP # 3 (2015-07-27)

App # Document Type Submitted
Available
3 schematics Schematics
Adobe Acrobat PDF (1290 kB)		 2015-07-02 00:00:00
N/A

APP # 1 (2012-07-10)

App # Document Type Submitted
Available
1 Schematics Schematics
Adobe Acrobat PDF (1290 kB)		 2012-07-05 00:00:00
N/A

APP # 2 (2012-07-10)

App # Document Type Submitted
Available
2 Block Diagram Block Diagram
Adobe Acrobat PDF (398 kB)		 2012-07-05 00:00:00
N/A

APP # 4 (2015-07-30)

App # Document Type Submitted
Available
4 User Manual Users Manual
Adobe Acrobat PDF (5659 kB)		 2015-07-27 00:00:00
N/A

APP # 5 (2015-07-30)

App # Document Type Submitted
Available
5 RF Exposure RF Exposure Info
Adobe Acrobat PDF (23 kB)		 2015-07-28 00:00:00
2015-07-30 00:00:00

APP # 1 (2012-07-10)

App # Document Type Submitted
Available
1 Tune up info Parts List/Tune Up Info
Adobe Acrobat PDF (213 kB)		 2012-07-05 00:00:00
N/A

APP # 5 (2015-07-30)

App # Document Type Submitted
Available
5 Block Diagram Block Diagram
Adobe Acrobat PDF (336 kB)		 2015-07-28 00:00:00
N/A

APP # 3 (2015-07-27)

App # Document Type Submitted
Available
3 user manual Users Manual
Adobe Acrobat PDF (5964 kB)		 2015-07-02 00:00:00
N/A

APP # 2 (2012-07-10)

App # Document Type Submitted
Available
2 Tune up info Parts List/Tune Up Info
Adobe Acrobat PDF (213 kB)		 2012-07-05 00:00:00
N/A

APP # 5 (2015-07-30)

App # Document Type Submitted
Available
5 Schematics Schematics
Adobe Acrobat PDF (1290 kB)		 2015-07-28 00:00:00
N/A

APP # 4 (2015-07-30)

App # Document Type Submitted
Available
4 Block Diagram Block Diagram
Adobe Acrobat PDF (336 kB)		 2015-07-27 00:00:00
2015-07-30 00:00:00

APP # 3 (2015-07-27)

App # Document Type Submitted
Available
3 operational description Operational Description
Adobe Acrobat PDF (782 kB)		 2015-07-02 00:00:00
N/A

APP # 5 (2015-07-30)

App # Document Type Submitted
Available
5 Tune Up Parts List/Tune Up Info
Adobe Acrobat PDF (228 kB)		 2015-07-28 00:00:00
N/A
5 Internal Photos Internal Photos
Adobe Acrobat PDF (1579 kB)		 2015-07-28 00:00:00
2015-07-30 00:00:00

APP # 3 (2015-07-27)

App # Document Type Submitted
Available
3 block diagram Block Diagram
Adobe Acrobat PDF (336 kB)		 2015-07-02 00:00:00
N/A

APP # 1 (2012-07-10)

App # Document Type Submitted
Available
1 Block Diagram Block Diagram
Adobe Acrobat PDF (398 kB)		 2012-07-05 00:00:00
N/A

APP # 2 (2012-07-10)

App # Document Type Submitted
Available
2 Schematics Schematics
Adobe Acrobat PDF (1290 kB)		 2012-07-05 00:00:00
N/A

APP # 4 (2015-07-30)

App # Document Type Submitted
Available
4 Operational Description Operational Description
Adobe Acrobat PDF (782 kB)		 2015-07-27 00:00:00
N/A

APP # 5 (2015-07-30)

App # Document Type Submitted
Available
5 Operational Description Operational Description
Adobe Acrobat PDF (782 kB)		 2015-07-28 00:00:00
N/A

APP # 3 (2015-07-27)

App # Document Type Submitted
Available
3 tune up procedure Parts List/Tune Up Info
Adobe Acrobat PDF (228 kB)		 2015-07-02 00:00:00
N/A

APP # 5 (2015-07-30)

App # Document Type Submitted
Available
5 RF Safety RF Exposure Info
Adobe Acrobat PDF (23 kB)		 2015-07-28 00:00:00
2015-07-30 00:00:00

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Teko Telecom Srl
FCC Registration Number (FRN): 0018963462
Alphanumeric FCC ID: XM2VHPA
Unique Application Identifier: mA1nxHNtwfVQD46IYJoGuw==
Line one: Via Meucci 24/A
City: Castel San Pietro Terme BO
State: N/A
Country: Italy
Zip Code: 40024

TCB Information
TCB Application Email Address: Stuart.Beck@nemko.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: XM2
Product Code: -VHPA

Person at the applicant's address to receive grant or for contact
Name: Alessandro Brunelli
Title: Certification Engineer
Telephone Number: +39 051 6946811 Extension:
Fax Number: +39 051 948473
Email: alessandro.brunelli@tekotelecom.it

Technical Contact
Firm Name:
TEKO TELECOM
First Name: MASSIMO
Last Name: NOTARGIACOMO
Line 1:
VIA MEUCCI 24/A
City: CASTEL SAN PIETRO TERME
Country:
Italy
Zip Code: 40024
Telephone Number:
39 051 6946811
Extension:
Fax Number: 39 051 948473
E-Mail:

Non Technical Contact
Firm Name: TEKO TELECOM
First Name: MARCO
Last Name: DELLA MORA
Line 1: VIA MEUCCI 24/A
City: CASTEL SAN PIETRO TERME
Country: Italy
Zip Code: 40024
Telephone Number: 39 051 6946811 Extension:
Fax Number: 39 051 948473
E-Mail: marco.dellamora@tekotelecom.it

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Very High Power Amplifier

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Nemko SpA
First Name:   Ralph
Last Name:   Spanevello
Telephone Number: 39-0392201201 Extension: 52
Fax Number:  39-0392201221
E-mail:  ralph.spanevello@nemko.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  ALESSANDRO BRUNELLI
Title of authorized signature:  CERTIFICATION ENGINEER

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Teko Telecom Srl
FCC Registration Number (FRN): 0018963462
Alphanumeric FCC ID: XM2VHPA
Unique Application Identifier: QCnuanz+mD8YVQhRpFo7rg==
Line one: Via Meucci 24/A
City: Castel San Pietro Terme BO
State: N/A
Country: Italy
Zip Code: 40024

TCB Information
TCB Application Email Address: Stuart.Beck@nemko.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: XM2
Product Code: -VHPA

Person at the applicant's address to receive grant or for contact
Name: Alessandro Brunelli
Title: Certification Engineer
Telephone Number: +39 051 6946811 Extension:
Fax Number: +39 051 948473
Email: alessandro.brunelli@tekotelecom.it

Technical Contact
Firm Name:
TEKO TELECOM
First Name: MASSIMO
Last Name: NOTARGIACOMO
Line 1:
VIA MEUCCI 24/A
City: CASTEL SAN PIETRO TERME
Country:
Italy
Zip Code: 40024
Telephone Number:
+39 051 6946811
Extension:
Fax Number: +39 051 948473
E-Mail:

Non Technical Contact
Firm Name: TEKO TELECOM
First Name: MARCO
Last Name: DELLA MORA
Line 1: VIA MEUCCI 24/A
City: CASTEL SAN PIETRO TERME
Country: Italy
Zip Code: 40024
Telephone Number: +39 051 6946811 Extension:
Fax Number: +39 051 948473
E-Mail: marco.dellamora@tekotelecom.it

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Very High Power Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Nemko SpA
First Name:   Ralph
Last Name:   Spanevello
Telephone Number: 39-0392201201 Extension: 52
Fax Number:  39-0392201221
E-mail:  ralph.spanevello@nemko.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  ALESSANDRO BRUNELLI
Title of authorized signature:  CERTIFICATION ENGINEER

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Teko Telecom Srl
FCC Registration Number (FRN): 0018963462
Alphanumeric FCC ID: XM2VHPA
Unique Application Identifier: 9++hiTaH2T0T0xW31O2ldA==
Line one: Via Meucci 24/A
City: Castel San Pietro Terme BO
State: N/A
Country: Italy
Zip Code: 40024

TCB Information
TCB Application Email Address: stuart.beck@nemko.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: XM2
Product Code: -VHPA

Person at the applicant's address to receive grant or for contact
Name: Alessandro Brunelli
Title: Certification Engineer
Telephone Number: +39 051 6946811 Extension:
Fax Number: +39 051 948473
Email: alessandro.brunelli@tekotelecom.it

Technical Contact
Firm Name:
Teko Telecom srl
First Name: Massimo
Last Name: Notargiacomo
Line 1:
Via Meucci 24/a
City: Castel San Pietro Terme
Country:
Italy
Zip Code: 40024
Telephone Number:
39 051 6946811
Extension:
Fax Number: 39 051 948473
E-Mail:

Non Technical Contact
Firm Name: Teko Telecom srl
First Name: Marco
Last Name: Della Mora
Line 1: Via Meucci 24/a
City: Castel San Pietro Terme
Country: Italy
Zip Code: 40024
Telephone Number: 39 051 6946811 Extension:
Fax Number: 39 051 948473
E-Mail: marco.dellamora@tekotelecom.it

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   B9B - Part 90 Class B Industrial Booster (non-SMR)
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Very High Power Amplifier

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Signal Booster. Power output listed is conducted. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). Except for distributed antenna systems (DAS) installed in buildings, the passband of a Class B booster should not encompass both commercial services (such as ESMR and Cellular Radiotelephone) and part 90 Land Mobile and Public Safety Services.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Alessandro Brunelli
Title of authorized signature:  Certification Engineer

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Teko Telecom Srl
FCC Registration Number (FRN): 0018963462
Alphanumeric FCC ID: XM2VHPA
Unique Application Identifier: wALwok40TmXykbTNeOgYqA==
Line one: Via Meucci 24/A
City: Castel San Pietro Terme BO
State: N/A
Country: Italy
Zip Code: 40024

TCB Information
TCB Application Email Address: stuart.beck@nemko.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: XM2
Product Code: -VHPA

Person at the applicant's address to receive grant or for contact
Name: Alessandro Brunelli
Title: Certification Engineer
Telephone Number: +39 051 6946811 Extension:
Fax Number: +39 051 948473
Email: alessandro.brunelli@tekotelecom.it

Technical Contact
Firm Name:
Teko Telecom srl
First Name: Massimo
Last Name: Notargiacomo
City: Cstel San Pietro Terme
Country:
Italy
E-Mail:

Non Technical Contact
Firm Name: Teko Telecom srl
First Name: Marco
Last Name: Della Mora
City: Castel San Pietro Terme
Country: Italy
E-Mail: marco.dellamora@tekotelecom.it

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Very High Power Amplifier

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Nemko SpA
First Name:   Ralph
Last Name:   Spanevello
Telephone Number: 39-0392201201 Extension: 52
Fax Number:  39-0392201221
E-mail:  ralph.spanevello@nemko.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Signal Booster. Power output listed is conducted. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Alessandro Brunelli
Title of authorized signature:  Certification Engineer

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Teko Telecom Srl
FCC Registration Number (FRN): 0018963462
Alphanumeric FCC ID: XM2VHPA
Unique Application Identifier: PbhhoAVULGcqvEHZvnW6MQ==
Line one: Via Meucci 24/A
City: Castel San Pietro Terme BO
State: N/A
Country: Italy
Zip Code: 40024

TCB Information
TCB Application Email Address: stuart.beck@nemko.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: XM2
Product Code: -VHPA

Person at the applicant's address to receive grant or for contact
Name: Alessandro Brunelli
Title: Certification Engineer
Telephone Number: +39 051 6946811 Extension:
Fax Number: +39 051 948473
Email: alessandro.brunelli@tekotelecom.it

Technical Contact
Firm Name:
Teko Telecom srl
First Name: Massimo
Last Name: Notargiacomo
City: Castel San Pietro Terme
Country:
Italy
E-Mail:

Non Technical Contact
Firm Name: Teko Telecom srl
First Name: Marco
Last Name: Della Mora
City: Castel San Pietro Terme
Country: Italy
E-Mail: marco.dellamora@tekotelecom.it

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Very High Power Amplifier

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Nemko SpA
First Name:   Ralph
Last Name:   Spanevello
Telephone Number: 39-0392201201 Extension: 52
Fax Number:  39-0392201221
E-mail:  ralph.spanevello@nemko.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Signal Booster. Power output listed is conducted. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). Except for distributed antenna systems (DAS) installed in buildings, the passband of a Class B booster should not encompass both commercial services (such as ESMR and Cellular Radiotelephone) and part 90 Land Mobile and Public Safety Services.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Alessandro Brunelli
Title of authorized signature:  Certification Engineer

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION 		TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 07/27/2015

Application Dated: 07/02/2015
Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-VHPA
Name of Grantee:  Teko Telecom Srl
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: Very High Power Amplifier
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90 851.0  -  862.0 20.0  Amp D7W
90 851.0  -  862.0 20.0  Amp F3E
90 935.0  -  940.0 20.0  Amp D7W

Signal Booster. Power output listed is conducted. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). Except for distributed antenna systems (DAS) installed in buildings, the passband of a Class B booster should not encompass both commercial services (such as ESMR and Cellular Radiotelephone) and part 90 Land Mobile and Public Safety Services.

>
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 07/10/2012

Application Dated: 07/05/2012
Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-VHPA
Name of Grantee:  Teko Telecom Srl
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Very High Power Amplifier
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 869.0  -  894.0 20.0  Amp F9W
22H 869.0  -  894.0 20.0  Amp GXW
22H 869.0  -  894.0 20.0  Amp DXW
22H 869.0  -  894.0 20.0  Amp D7W
22H 824.0  -  849.0 0.0025  Amp F9W
22H 824.0  -  849.0 0.0025  Amp GXW
22H 824.0  -  849.0 0.0025  Amp DXW
22H 824.0  -  849.0 0.0025  Amp D7W
27 2110.0  -  2155.0 20.0  Amp F9W
27 2110.0  -  2155.0 20.0  Amp D7W
27 1710.0  -  1755.0 0.0025  Amp F9W
27 1710.0  -  1755.0 0.0025  Amp D7W
90 806.0  -  824.0 0.0025  Amp D7W
90 851.0  -  869.0 20.0  Amp D7W
27 698.0  -  716.0 0.0025  Amp D7W
27 728.0  -  746.0 20.0  Amp D7W
27 746.0  -  757.0 20.0  Amp D7W
27 776.0  -  787.0 0.0025  Amp D7W
90 896.0  -  901.0 0.0025  Amp D7W
90 935.0  -  940.0 20.0  Amp D7W

Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy 		  Date of Grant: 07/10/2012

Application Dated: 07/05/2012
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-VHPA
Name of Grantee:  Teko Telecom Srl
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Very High Power Amplifier
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 869.0  -  894.0 20.0  Amp F9W
22H 869.0  -  894.0 20.0  Amp GXW
22H 869.0  -  894.0 20.0  Amp DXW
22H 869.0  -  894.0 20.0  Amp D7W
22H 824.0  -  849.0 0.0025  Amp F9W
22H 824.0  -  849.0 0.0025  Amp GXW
22H 824.0  -  849.0 0.0025  Amp DXW
22H 824.0  -  849.0 0.0025  Amp D7W
27 2110.0  -  2155.0 20.0  Amp F9W
27 2110.0  -  2155.0 20.0  Amp D7W
27 1710.0  -  1755.0 0.0025  Amp F9W
27 1710.0  -  1755.0 0.0025  Amp D7W
90 806.0  -  824.0 0.0025  Amp D7W
90 851.0  -  869.0 20.0  Amp D7W
27 698.0  -  716.0 0.0025  Amp D7W
27 728.0  -  746.0 20.0  Amp D7W
27 746.0  -  757.0 20.0  Amp D7W
27 776.0  -  787.0 0.0025  Amp D7W
90 896.0  -  901.0 0.0025  Amp D7W
90 935.0  -  940.0 20.0  Amp D7W

Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).



Mail To:


EA969590
TCB GRANT OF EQUIPMENT
AUTHORIZATION 		TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 07/30/2015

Application Dated: 07/28/2015
Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-VHPA
Name of Grantee:  Teko Telecom Srl
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Very High Power Amplifier
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 869.0  -  894.0 20.0  Amp F9W
22H 869.0  -  894.0 20.0  Amp GXW
22H 869.0  -  894.0 20.0  Amp DXW
22H 869.0  -  894.0 20.0  Amp D7W
22H 824.0  -  849.0 0.0025  Amp F9W
22H 824.0  -  849.0 0.0025  Amp GXW
22H 824.0  -  849.0 0.0025  Amp DXW
22H 824.0  -  849.0 0.0025  Amp D7W
27 2110.0  -  2155.0 20.0  Amp F9W
27 2110.0  -  2155.0 20.0  Amp D7W
27 1710.0  -  1755.0 0.0025  Amp F9W
27 1710.0  -  1755.0 0.0025  Amp D7W
90 851.0  -  869.0 20.0  Amp D7W
90 806.0  -  824.0 0.0025  Amp D7W
27 728.0  -  746.0 20.0  Amp D7W
27 698.0  -  716.0 0.0025  Amp D7W
27 746.0  -  757.0 20.0  Amp D7W
27 776.0  -  787.0 0.0025  Amp D7W
90 935.0  -  940.0 20.0  Amp D7W
90 896.0  -  901.0 0.0025  Amp D7W
27 2110.0  -  2180.0 20.0  Amp F9W
27 2110.0  -  2180.0 20.0  Amp D7W

Signal Booster. Power output listed is conducted. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). Except for distributed antenna systems (DAS) installed in buildings, the passband of a Class B booster should not encompass both commercial services (such as ESMR and Cellular Radiotelephone) and part 90 Land Mobile and Public Safety Services.

>
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 07/10/2012

Application Dated: 07/05/2012
Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-VHPA
Name of Grantee:  Teko Telecom Srl
Equipment Class: PCS Licensed Transmitter
Notes: Very High Power Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1930.0  -  1995.0 20.0  Amp F9W
24E 1930.0  -  1995.0 20.0  Amp D7W
24E 1930.0  -  1995.0 20.0  Amp GXW
24E 1930.0  -  1995.0 20.0  Amp DXW
24E 1850.0  -  1915.0 0.0025  Amp F9W
24E 1850.0  -  1915.0 0.0025  Amp D7W
24E 1850.0  -  1915.0 0.0025  Amp GXW
24E 1850.0  -  1915.0 0.0025  Amp DXW
24D 901.0  -  902.0 0.0025  Amp D7W
24D 940.0  -  941.0 20.0  Amp D7W

Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy 		  Date of Grant: 07/10/2012

Application Dated: 07/05/2012
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-VHPA
Name of Grantee:  Teko Telecom Srl
Equipment Class: PCS Licensed Transmitter
Notes: Very High Power Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1930.0  -  1995.0 20.0  Amp F9W
24E 1930.0  -  1995.0 20.0  Amp D7W
24E 1930.0  -  1995.0 20.0  Amp GXW
24E 1930.0  -  1995.0 20.0  Amp DXW
24E 1850.0  -  1915.0 0.0025  Amp F9W
24E 1850.0  -  1915.0 0.0025  Amp D7W
24E 1850.0  -  1915.0 0.0025  Amp GXW
24E 1850.0  -  1915.0 0.0025  Amp DXW
24D 901.0  -  902.0 0.0025  Amp D7W
24D 940.0  -  941.0 20.0  Amp D7W

Signal Booster. Power output listed is conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).



Mail To:


EA306070
TCB GRANT OF EQUIPMENT
AUTHORIZATION 		TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 07/30/2015

Application Dated: 07/27/2015
Teko Telecom Srl
Via Meucci 24/A
Castel San Pietro Terme BO, 40024
Italy
 
Attention: Alessandro Brunelli , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM2-VHPA
Name of Grantee:  Teko Telecom Srl
Equipment Class: PCS Licensed Transmitter
Notes: Very High Power Amplifier
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1930.0  -  1995.0 20.0  Amp F9W
24E 1930.0  -  1995.0 20.0  Amp D7W
24E 1930.0  -  1995.0 20.0  Amp GXW
24E 1930.0  -  1995.0 20.0  Amp DWX
24E 1850.0  -  1915.0 0.0025  Amp F9W
24E 1850.0  -  1915.0 0.0025  Amp D7W
24E 1850.0  -  1915.0 0.0025  Amp GXW
24E 1850.0  -  1915.0 0.0025  Amp DXW
24D 940.0  -  941.0 20.0  Amp D7W
24D 901.0  -  902.0 0.0025  Amp D7W

Signal Booster. Power output listed is conducted. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

>

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details