FCC ID XM5-SM2144N1

Nano WiReach 802.11b/g, 2144

by Connect One Ltd.

Grantee Code: XM5   Product Code: SM2144N1
Latest application date: 2012-05-09

FCC ID Device Details

FCC IDXM5-SM2144N1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXM5
Product CodeSM2144N1
Applicant BusinessConnect One Ltd. 🇮🇱
Related Domains connectone.com
Equipment ClassNano WiReach 802.11b/g, 2144
Test FirmUL LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2012-05-09
2412-2462 MHzOriginal Equipment2009-08-31

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2009-08-31PDF 2.4 MB
Internal Photos of Host and ModuleInternal Photos2012-05-09PDF 1.5 MB
Internal PhotosInternal Photos2009-08-31PDF 84.1 KB
External Photos of Host DeviceExternal Photos2012-05-09PDF 191.4 KB
External PhotosExternal Photos2009-08-31PDF 378.4 KB
Label Info for HostID Label/Location Info2012-05-09PDF 223.9 KB
FCC ID LabelID Label/Location Info2009-08-31PDF 115.9 KB
Test Setup PhotosTest Setup Photos2009-08-31PDF 411.2 KB
EMC ReportTest Report2012-05-09PDF 1.5 MB
Test ReportTest Report2009-08-31PDF 445.2 KB
Authorization LetterCover Letter(s)2012-05-09PDF 349.6 KB
Class 2 PC LetterCover Letter(s)2012-05-09PDF 24.1 KB
Confidential Request LetterCover Letter(s)2009-08-31PDF 85.9 KB
Modular Approval LetterCover Letter(s)2009-08-31PDF 24.7 KB
SAR ReportRF Exposure Info2012-05-09PDF 1.5 MB
RF Exposure InformationRF Exposure Info2009-08-31PDF 27.9 KB

Application Information

Application ID3Vaq9ytXXDWxMsyrpNtdcg==
Final Action Date2012-05-09
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0018994236
Model-SM2144N1
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionNano WiReach 802.11b/g, 2144
Responsible PartyAvi Provizor, avi.p@connectone.com , +972-9-766-0456
AgentJay Jay Jay, RF Exposure Lab, info@rfexposurelab.com , 760 471 2100
Technical ContactJay Moulton, RF Exposure Lab, info@rfexposurelab.com , 760 471 2100
Test FirmRick Titus, UL LLC, Rick.A.Titus@us.ul.com , 847-664-3281
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final portable host products only as shown in the filings under this FCC ID. Installation of this device into other portable host products requires the submission of a Class II permissive change or new application as appropriate. Users must be provided with transmitter operating conditions to satisfy RF exposure compliance. The highest reported SAR value is 0.39 W/kg

Applications

Application IDDatePurpose
3Vaq9ytXXDWxMsyrpNtdcg==2012-05-09Class II permissive change or modification of presently authorized equipment
8C7h51AAUivQxm/2uTNJvQ==2009-08-31Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.0315C
2412-2462 MHz0.01715C

Grants

TCB Grant - Application 8C7h51AAUivQxm/2uTNJvQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 08/31/2009

Application Dated: 08/31/2009
Connect One Ltd.
20 Atir Yeda Street
Kfar Saba, 44643
Israel
 
Attention: Avi Provizor

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM5-SM2144N1
Name of Grantee:  Connect One Ltd.
Equipment Class: Digital Transmission System
Notes: Nano WiReach 802.11b/g, 2144
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.03  
15C 2412.0  -  2462.0 0.017  

Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

EAS Grant - Application 8C7h51AAUivQxm/2uTNJvQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Connect One Ltd.
20 Atir Yeda Street P.O. Box ,
Kfar Saba, 44643
Israel
  Date of Grant: 08/31/2009

Application Dated: 08/31/2009
 
Attention: Avi Provizor

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM5-SM2144N1
Name of Grantee:  Connect One Ltd.
Equipment Class: Digital Transmission System
Notes: Nano WiReach 802.11b/g, 2144
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.03  
15C 2412.0  -  2462.0 0.017  

Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.



TCB Grant - Application 3Vaq9ytXXDWxMsyrpNtdcg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/09/2012

Application Dated: 05/08/2012
Connect One Ltd.
20 Atir Yeda Street
Kfar Saba, 44643
Israel
 
Attention: Avi Provizor

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM5-SM2144N1
Name of Grantee:  Connect One Ltd.
Equipment Class: Digital Transmission System
Notes: Nano WiReach 802.11b/g, 2144
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.03  
15C 2412.0  -  2462.0 0.017  

Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final portable host products only as shown in the filings under this FCC ID. Installation of this device into other portable host products requires the submission of a Class II permissive change or new application as appropriate. Users must be provided with transmitter operating conditions to satisfy RF exposure compliance. The highest reported SAR value is 0.39 W/kg


EAS Grant - Application 3Vaq9ytXXDWxMsyrpNtdcg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Connect One Ltd.
20 Atir Yeda Street P.O. Box ,
Kfar Saba, 44643
Israel
  Date of Grant: 05/09/2012

Application Dated: 05/08/2012
 
Attention: Avi Provizor

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XM5-SM2144N1
Name of Grantee:  Connect One Ltd.
Equipment Class: Digital Transmission System
Notes: Nano WiReach 802.11b/g, 2144
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.03  
15C 2412.0  -  2462.0 0.017  

Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final portable host products only as shown in the filings under this FCC ID. Installation of this device into other portable host products requires the submission of a Class II permissive change or new application as appropriate. Users must be provided with transmitter operating conditions to satisfy RF exposure compliance. The highest reported SAR value is 0.39 W/kg



Mail To: