FCC ID XMR201604M26

GSM/GPRS module

by Quectel Wireless Solutions Company Limited

Grantee Code: XMR   Product Code: 201604M26
Latest application date: 2016-05-31

Device Images

FCC ID Device Details

FCC IDXMR201604M26
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXMR
Product Code201604M26
Applicant BusinessQuectel Wireless Solutions Company Limited 🇨🇳
Related Domains quectel.com
Equipment ClassGSM/GPRS module
Test FirmBay Area Compliance Laboratories Corp.(Taiwan)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2016-05-31
824.2-848.8 MHzOriginal Equipment2016-05-31

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2016-05-31PDF 1.6 MB
Internal PhotosInternal Photos2016-05-31PDF 187.4 KB
External PhotosExternal Photos2016-05-31PDF 122.3 KB
FCC ID LabelID Label/Location Info2016-05-31PDF 91 KB
Test Setup PhotosTest Setup Photos2016-05-31PDF 79.3 KB
Test Setup PhotosTest Setup Photos2016-05-31PDF 149.5 KB
Test ReportTest Report2016-05-31PDF 564.7 KB
Test ReportTest Report2016-05-31PDF 1.8 MB
Confidential Request LettersCover Letter(s)2016-05-31PDF 24 KB
Modular Approval LettersCover Letter(s)2016-05-31PDF 85.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 71 KB
Schematics Metadata onlySchematicsPDF 414.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 535.8 KB
Part List Metadata onlyParts List/Tune Up InfoPDF 65.3 KB
Tune UP Information Metadata onlyParts List/Tune Up InfoPDF 880.2 KB

Application Information

Application IDuoYtCZpZLqLtlIRu5g/Wvg==
Final Action Date2016-05-31
Application PurposeOriginal Equipment
Applicant FRN0018988279
Model201604M26
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionGSM/GPRS module
Responsible PartyJean Hu, jean.hu@quectel.com , +8602150086326
Test FirmJohnson Chung, Bay Area Compliance Laboratories Corp.(Taiwan), johnson.chung@baclcorp.com , (02)27206758
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. Modular Approval for mobile RF Exposure conditions. This grant is valid only when the device is sold to OEM integrators and installation is done under the control of the Grantee. This transmitter is restricted for use with the specific antenna(s) tested in this application for certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20cm from all persons. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.

Applications

Application IDDatePurpose
uoYtCZpZLqLtlIRu5g/Wvg==2016-05-31Original Equipment
pJxgw9dm7/mYEYxZfOBkpg==2016-05-31Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz1.6522.5ppm246KGXW22H
1850.2-1909.8 MHz0.9042.5ppm245KGXW24E
2402-2480 MHz0.009000015C

Grants

TCB Grant - Application uoYtCZpZLqLtlIRu5g/Wvg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 05/31/2016

Application Dated: 05/31/2016
Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII
(Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR201604M26
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: GSM/GPRS module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.009  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. This grant is valid only when the device is sold to OEM integrators and installation is done under the control of the Grantee. This transmitter is restricted for use with the specific antenna(s) tested in this application for certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20cm from all persons. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.

EAS Grant - Application uoYtCZpZLqLtlIRu5g/Wvg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
  Date of Grant: 05/31/2016

Application Dated: 05/31/2016
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR201604M26
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: GSM/GPRS module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.009  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. This grant is valid only when the device is sold to OEM integrators and installation is done under the control of the Grantee. This transmitter is restricted for use with the specific antenna(s) tested in this application for certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20cm from all persons. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.



TCB Grant - Application pJxgw9dm7/mYEYxZfOBkpg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 05/31/2016

Application Dated: 05/31/2016
Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII
(Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR201604M26
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.652 2.5  PM 246KGXW
24E 1850.2  -  1909.8 0.904 2.5  PM 245KGXW

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 1.0 dBi for part 22H and 1.0 dBi for part 24E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

EAS Grant - Application pJxgw9dm7/mYEYxZfOBkpg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
  Date of Grant: 05/31/2016

Application Dated: 05/31/2016
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR201604M26
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.652 2.5  PM 246KGXW
24E 1850.2  -  1909.8 0.904 2.5  PM 245KGXW

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 1.0 dBi for part 22H and 1.0 dBi for part 24E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.



Mail To: