FCC ID XMR202309AF55C

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany

Date of Grant: 12/20/2023 Application Dated: 12/18/2023

Quectel Wireless Solutions Company Limited

Building 5, Shanghai Business Park PhaseIII

(Area B),No.1016 Tianlin Road, Minhang District

Shanghai, 200233 China

Attention: Jean Hu

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XMR202309AF55C
Name of Grantee:	Quectel Wireless Solutions Company Limited
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wi-Fi & Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.045
CC MO	15E	5260.0  -  5320.0	0.043
CC MO	15E	5500.0  -  5720.0	0.04
CC MO	15E	5745.0  -  5825.0	0.042

Single Module approval is filing. Output power is maximum average conducted. This device supports IEEE 802.11 a/n20/n40/n80/ax20/ax40/ax80 MHz channel bandwidths. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Quectel Wireless Solutions Company Limited Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District Shanghai, 200233 China

Date of Grant: 12/20/2023 Application Dated: 12/18/2023

Attention: Jean Hu

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XMR202309AF55C
Name of Grantee:	Quectel Wireless Solutions Company Limited
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wi-Fi & Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.045
CC MO	15E	5260.0  -  5320.0	0.043
CC MO	15E	5500.0  -  5720.0	0.04
CC MO	15E	5745.0  -  5825.0	0.042

Single Module approval is filing. Output power is maximum average conducted. This device supports IEEE 802.11 a/n20/n40/n80/ax20/ax40/ax80 MHz channel bandwidths. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application S+S7pfQPFHWoTXu34294Zg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany

Date of Grant: 12/20/2023 Application Dated: 12/18/2023

Quectel Wireless Solutions Company Limited

Building 5, Shanghai Business Park PhaseIII

(Area B),No.1016 Tianlin Road, Minhang District

Shanghai, 200233 China

Attention: Jean Hu

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XMR202309AF55C
Name of Grantee:	Quectel Wireless Solutions Company Limited
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wi-Fi & Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.006

Single Module approval is filing. Output power is maximum peak conducted. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Quectel Wireless Solutions Company Limited Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District Shanghai, 200233 China

Date of Grant: 12/20/2023 Application Dated: 12/18/2023

Attention: Jean Hu

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XMR202309AF55C
Name of Grantee:	Quectel Wireless Solutions Company Limited
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wi-Fi & Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.006

Single Module approval is filing. Output power is maximum peak conducted. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application mUehHVFLIHue85TOKs6Xvw==

EAS Grant - Application mUehHVFLIHue85TOKs6Xvw==

TCB Grant - Application m+YnOoG7yy0hhPsvo3LBrA==

EAS Grant - Application m+YnOoG7yy0hhPsvo3LBrA==

TCB Grant - Application jsM6EkVI8buQbqdII+qhNg==

EAS Grant - Application jsM6EkVI8buQbqdII+qhNg==

TCB Grant - Application cb/9RCfLUc0xyW4vk8VfYQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany

Date of Grant: 12/20/2023 Application Dated: 12/18/2023

Quectel Wireless Solutions Company Limited

Building 5, Shanghai Business Park PhaseIII

(Area B),No.1016 Tianlin Road, Minhang District

Shanghai, 200233 China

Attention: Jean Hu

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XMR202309AF55C
Name of Grantee:	Quectel Wireless Solutions Company Limited
Equipment Class:	Digital Transmission System
Notes:	Wi-Fi & Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.006
CC MO	15C	2412.0  -  2462.0	0.042

Single Module approval is filing. Output power is maximum peak conducted. This device supports IEEE 802.11 b/g/n20/ax20 MHz channel bandwidths. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Quectel Wireless Solutions Company Limited Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District Shanghai, 200233 China

Date of Grant: 12/20/2023 Application Dated: 12/18/2023

Attention: Jean Hu

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XMR202309AF55C
Name of Grantee:	Quectel Wireless Solutions Company Limited
Equipment Class:	Digital Transmission System
Notes:	Wi-Fi & Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.006
CC MO	15C	2412.0  -  2462.0	0.042

Single Module approval is filing. Output power is maximum peak conducted. This device supports IEEE 802.11 b/g/n20/ax20 MHz channel bandwidths. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: