FCC ID XNAWBP02

IP CAM

by Withings

Grantee Code: XNA   Product Code: WBP02
Latest application date: 2014-10-08

FCC ID Device Details

FCC IDXNAWBP02
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXNA
Product CodeWBP02
Applicant BusinessWithings 🇫🇷
Related Domains withings.com
Equipment ClassIP CAM
Test FirmInternational Certification Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2014-10-08
2402-2480 MHzOriginal Equipment2014-10-08

Exhibits

DocumentTypeAvailableFile
UserManUsers Manual2014-10-08PDF 1.6 MB
Int pho-1Internal Photos2014-10-08PDF 4.7 MB
Int pho-2Internal Photos2014-10-08PDF 1.4 MB
Ext phoExternal Photos2014-10-08PDF 654.3 KB
Label Smpl & LocID Label/Location Info2014-10-08PDF 372.1 KB
TSupTest Setup Photos2014-10-08PDF 272.7 KB
Test RptTest Report2014-10-08PDF 2.4 MB
Test RptTest Report2014-10-08PDF 3.5 MB
Test Rpt(BT LE)Test Report2014-10-08PDF 1.3 MB
Ad hoc declarationCover Letter(s)2014-10-08PDF 88.7 KB
ConfidentialCover Letter(s)2014-10-08PDF 131.8 KB
DoCCover Letter(s)2014-10-08PDF 97.4 KB
POACover Letter(s)2014-10-08PDF 126.2 KB
RF ExpRF Exposure Info2014-10-08PDF 215.9 KB
Blk Dia Metadata onlyBlock DiagramPDF 77.8 KB
Schem Metadata onlySchematicsPDF 465.1 KB
OpDes Metadata onlyOperational DescriptionPDF 174.7 KB

Application Information

Application IDdljPEuNJrFBmiikgewrkTw==
Final Action Date2014-10-08
Application PurposeOriginal Equipment
Applicant FRN0018997460
ModelWBP02
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIP CAM
Responsible PartyXavier Debreuil, Product Director, regulatory@withings.com , +33 6 0897 9794
AgentGary Gary Gary, International Certification Corp., 886-3-271-8628
Technical ContactGary Chang, International Certification Corp., 886-3-271-8628
Non-Technical ContactWendy Liao, International Certification Corp., 886-3-271-8629
Test FirmFu-Cheng Chuang, International Certification Corp., Jeff@icertifi.com.tw , 886-3-271-8666
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

Applications

Application IDDatePurpose
dljPEuNJrFBmiikgewrkTw==2014-10-08Original Equipment
XlfBvPoHgu6A1FTq5NOp5Q==2014-10-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.013000015CCC
2402-2480 MHz0.00515CCC
2412-2462 MHz0.69515CCC, MO

Grants

TCB Grant - Application XlfBvPoHgu6A1FTq5NOp5Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 10/08/2014

Application Dated: 10/07/2014
Withings
2 rue Maurice Hartmann
Issy-les-Moulineaux, 92130
France
 
Attention: Xavier Debreuil , Product Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XNAWBP02
Name of Grantee:  Withings
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IP CAM
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.013  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application XlfBvPoHgu6A1FTq5NOp5Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Withings
2 rue Maurice Hartmann
Issy-les-Moulineaux, 92130
France
  Date of Grant: 10/08/2014

Application Dated: 10/07/2014
 
Attention: Xavier Debreuil , Product Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XNAWBP02
Name of Grantee:  Withings
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IP CAM
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.013  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application dljPEuNJrFBmiikgewrkTw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 10/08/2014

Application Dated: 10/07/2014
Withings
2 rue Maurice Hartmann
Issy-les-Moulineaux, 92130
France
 
Attention: Xavier Debreuil , Product Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XNAWBP02
Name of Grantee:  Withings
Equipment Class: Digital Transmission System
Notes: IP CAM
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.695  
CC 15C 2402.0  -  2480.0 0.005  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application dljPEuNJrFBmiikgewrkTw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Withings
2 rue Maurice Hartmann
Issy-les-Moulineaux, 92130
France
  Date of Grant: 10/08/2014

Application Dated: 10/07/2014
 
Attention: Xavier Debreuil , Product Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XNAWBP02
Name of Grantee:  Withings
Equipment Class: Digital Transmission System
Notes: IP CAM
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.695  
CC 15C 2402.0  -  2480.0 0.005  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: