FCC ID XOECDMRF101B

Dual Band CDMA 1x/ GPS(Module)

by M Seven System Ltd.

Grantee Code: XOE   Product Code: CDMRF101B
Latest application date: 2011-03-03

FCC ID Device Details

FCC IDXOECDMRF101B
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXOE
Product CodeCDMRF101B
Applicant BusinessM Seven System Ltd. 🇰🇷
Related Domains m7system.com
Equipment ClassDual Band CDMA 1x/ GPS(Module)
Test FirmHCT Co., LTD

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.7-848.31 MHzClass II permissive change or modification of presently authorized equipment2011-03-03
824.7-848.31 MHzOriginal Equipment2010-08-18

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2011-02-14PDF 1.4 MB
Internal PhotoInternal Photos2011-08-30PDF 444.1 KB
internal PhotoInternal Photos2011-02-14PDF 246 KB
external PhotoExternal Photos2011-08-30PDF 249.3 KB
External PhotoExternal Photos2011-02-14PDF 220 KB
labelID Label/Location Info2010-08-18PDF 298.4 KB
Setup PhotoTest Setup Photos2011-08-30PDF 463 KB
Setup PhotoTest Setup Photos2011-02-14PDF 421.6 KB
test reportTest Report2011-03-03PDF 517.4 KB
test reportTest Report2010-08-18PDF 678.8 KB
modular letterAttestation Statements2010-08-18PDF 234.2 KB
Authorization letterCover Letter(s)2011-03-03PDF 69.3 KB
PCII LetterCover Letter(s)2011-03-03PDF 80.2 KB
confidential LetterCover Letter(s)2011-03-03PDF 77.9 KB
Authorization letterCover Letter(s)2010-08-18PDF 779.9 KB
confidential LetterCover Letter(s)2010-08-18PDF 221.6 KB
Rf Exposure.RF Exposure Info2011-03-03PDF 66.9 KB
Rf ExposureRF Exposure Info2010-08-18PDF 66.8 KB

Application Information

Application ID0npmpwvfHn8RXfGNUuUk2g==
Final Action Date2011-03-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019029479
ModelCDMRF101B
Frequency Range824.7-848.31 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionDual Band CDMA 1x/ GPS(Module)
Responsible PartyCS LEE, cslee@m7system.com , +82-2-368-9057
Test FirmSang Lee, HCT Co., LTD, sjlee@HCT.co.kr , 82-31-645-6420
TCB Emailtcb@siemic.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date08/30/2011
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change. Modular Approval . Output power listed is ERP for Part 22 and EIRP for Part 24.Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
0npmpwvfHn8RXfGNUuUk2g==2011-03-03Class II permissive change or modification of presently authorized equipment
ca3vJsubyOmLkTT4aokFzw==2010-08-18Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.7-848.31 MHz0.3240.007ppm1M28F9W22H
1851.25-1908.75 MHz0.110.003ppm1M28F9W24E

Grants

TCB Grant - Application ca3vJsubyOmLkTT4aokFzw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 08/18/2010

Application Dated: 08/18/2010
M Seven System Ltd.
#806, Jeiplatz, 186, Gasan digital 1-ro,
Geumcheon-gu, Seoul, 153-792
Seoul, 137-739
South Korea
 
Attention: CS LEE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XOECDMRF101B
Name of Grantee:  M Seven System Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: Dual Band CDMA 1x/ GPS(Module)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.324 0.007  PM 1M28F9W
24E 1851.25  -  1908.75 0.11 0.003  PM 1M28F9W

Modular Approval . Output power listed is ERP for Part 22 and EIRP for Part 24.

Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


EAS Grant - Application ca3vJsubyOmLkTT4aokFzw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

M Seven System Ltd.
#806, Jeiplatz, 186, Gasan digital 1-ro, Geumcheon-gu, Seoul, 153-792
Seoul, 137-739
South Korea
  Date of Grant: 08/18/2010

Application Dated: 08/18/2010
 
Attention: CS LEE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XOECDMRF101B
Name of Grantee:  M Seven System Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: Dual Band CDMA 1x/ GPS(Module)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.324 0.007  PM 1M28F9W
24E 1851.25  -  1908.75 0.11 0.003  PM 1M28F9W

Modular Approval . Output power listed is ERP for Part 22 and EIRP for Part 24.

Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



TCB Grant - Application 0npmpwvfHn8RXfGNUuUk2g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 03/03/2011

Application Dated: 03/03/2011
M Seven System Ltd.
#806, Jeiplatz, 186, Gasan digital 1-ro,
Geumcheon-gu, Seoul, 153-792
Seoul, 137-739
South Korea
 
Attention: CS LEE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XOECDMRF101B
Name of Grantee:  M Seven System Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: Dual Band CDMA 1x/ GPS(Module)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.324 0.007  PM 1M28F9W
24E 1851.25  -  1908.75 0.11 0.003  PM 1M28F9W

Class II Permissive Change.

Modular Approval .

Output power listed is ERP for Part 22 and EIRP for Part 24.Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


EAS Grant - Application 0npmpwvfHn8RXfGNUuUk2g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

M Seven System Ltd.
#806, Jeiplatz, 186, Gasan digital 1-ro, Geumcheon-gu, Seoul, 153-792
Seoul, 137-739
South Korea
  Date of Grant: 03/03/2011

Application Dated: 03/03/2011
 
Attention: CS LEE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XOECDMRF101B
Name of Grantee:  M Seven System Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: Dual Band CDMA 1x/ GPS(Module)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.324 0.007  PM 1M28F9W
24E 1851.25  -  1908.75 0.11 0.003  PM 1M28F9W

Class II Permissive Change.

Modular Approval .

Output power listed is ERP for Part 22 and EIRP for Part 24.Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



Mail To: