FCC ID XOH-ZLINK2

GSM/ GPRS/ EDGE/ CDMA/ UMTS/HSPA Module

by Medtronic Monitoring, Inc.

Grantee Code: XOH   Product Code: ZLINK2
Latest application date: 2015-05-14

FCC ID Device Details

FCC IDXOH-ZLINK2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXOH
Product CodeZLINK2
Applicant BusinessMedtronic Monitoring, Inc. 🇺🇸
Related Domains medtronic.com
Equipment ClassGSM/ GPRS/ EDGE/ CDMA/ UMTS/HSPA Module
Test FirmPCTEST Engineering Laboratory, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
817.9-823.1 MHzClass II permissive change or modification of presently authorized equipment2015-05-14
817.9-823.1 MHzClass II permissive change or modification of presently authorized equipment2014-05-15
817.9-823.1 MHzChange in identification of presently authorized equipment. Original FCC ID: QIPPXS8 Grant Date: 02/05/20132014-05-09

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2015-05-14PDF 1.3 MB
photographExternal Photos2014-05-15PDF 68.3 KB
photoExternal Photos2014-05-09PDF 68.3 KB
ID Label/location infoID Label/Location Info2014-05-09PDF 388.5 KB
SAR Test Setup PhotosTest Setup Photos2015-05-14PDF 495.7 KB
SAR reportTest Report2014-05-15PDF 2 MB
SAR test supportTest Report2014-05-15PDF 208.7 KB
Class II Cover LetterCover Letter(s)2015-05-14PDF 438.5 KB
Confidentiality requestCover Letter(s)2014-05-15PDF 257.2 KB
Letter of agencyCover Letter(s)2014-05-15PDF 231 KB
Authorization to change in IDCover Letter(s)2014-05-09PDF 320 KB
Cover letter ID changeCover Letter(s)2014-05-09PDF 260.7 KB
SAR ReportRF Exposure Info2015-05-14PDF 4 MB
Block diagram Metadata onlyBlock DiagramPDF 21.1 KB
antenna spec Metadata onlyOperational DescriptionPDF 495 KB
Tune up info Metadata onlyParts List/Tune Up InfoPDF 643.5 KB

Application Information

Application IDRTXgBZ2YInNwXoYvdIao9Q==
Final Action Date2015-05-14
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0008250839
ModelZLINK2
Frequency Range817.9-823.1 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionGSM/ GPRS/ EDGE/ CDMA/ UMTS/HSPA Module
Responsible PartyCharles S Farlow, Program Director, Regulatory Affairs, charles.s.farlow@medtronic.com , 763-526-0664
Technical ContactRandy Ortanez, PCTEST Engineering Laboratory, Inc., tcb@pctestlab.com , 410-290-6652
Test FirmRandy Ortanez, PCTEST Engineering Laboratory, Inc., lab@pctestlab.com , 410-290-6652
TCB Emailtcb@pctestlab.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change. Power listed is conducted. This Class II Permissive Change is to integrate this module into a device with antenna having a maximum gain 3.92 dBi (850 MHz), 2.51 dBi (1900 MHz) including the insertion loss of matching circuitry. Additonally, this Permissive Change covers BC0 and BC1 CDMA cellular operation with the device integrated into the host device as described in this filing and within the specific usuage conditons as documented in the host user manual and RF Exposure report. The antenna(s) used for this transmitter must not be co-loated or operating in conjunction with any other antenna or transmitter, except ain accordance with FCC multi-transmitter product procedures, or as documented in this filing. SAR complaince has been established in the host product(s) as tested in this filing, and can be used in host product(s) with substantially similar physical dimensions, constrcution, and electrical and RF characteristics. End-users must be provided with specific information required to staisfy RF exposure compliance for all final host devices. Compliance of this device in all final host configurations is the responsibility of the Grantee. The highest reported SAR for stand-alone and simultaneous use conditions is 1.43 W/kg and 1.51 W/kg, respectively.

Applications

Application IDDatePurpose
RTXgBZ2YInNwXoYvdIao9Q==2015-05-14Class II permissive change or modification of presently authorized equipment
l0GpWINsmsJzRMHOMV91Nw==2014-05-15Class II permissive change or modification of presently authorized equipment
zowRX9QJxJDmEh/RQKpKmw==2014-05-09Change in identification of presently authorized equipment. Original FCC ID: QIPPXS8 Grant Date: 02/05/2013

Equipment Authorization

FrequencyOutputToleranceEmissionRules
817.9-823.1 MHz0.282.5ppm1M28F9W9
824.2-848.8 MHz2.42.5ppm247KGXW22H
824.2-848.8 MHz1.072.5ppm241KG7W22H
824.7-843.3 MHz0.852.5ppm1M37F9W22H
826.4-846.6 MHz0.692.5ppm4M17F9W22H
1850.2-1909.8 MHz1.122.5ppm249KGXW24E
1850.2-1909.8 MHz0.872.5ppm235KG7W24E
1851.25-1908.75 MHz0.742.5ppm1M38F9W24E
1852.4-1907.6 MHz0.682.5ppm4M19F9W24E

Grants

TCB Grant - Application zowRX9QJxJDmEh/RQKpKmw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
Date of Grant: 05/09/2014

Application Dated: 05/08/2014
Medtronic Monitoring, Inc.
8200 Coral Sea Street NE
MVS11
Mounds View, MN 55112
 
Attention: Charles Farlow , Program Director, Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XOH-ZLINK2
Name of Grantee:  Medtronic Monitoring, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS/EDGE/CDMA/UMTS/HSPA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.4 2.5  PM 247KGXW
22H 824.2  -  848.8 1.07 2.5  PM 241KG7W
22H 826.4  -  846.6 0.69 2.5  PM 4M17F9W
24E 1850.2  -  1909.8 1.12 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.87 2.5  PM 235KG7W
24E 1852.4  -  1907.6 0.68 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.74 2.5  PM 1M38F9W
22H 824.7  -  843.3 0.85 2.5  PM 1M37F9W
90 817.9  -  823.1 0.28 2.5  PM 1M28F9W

Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. Approval is limited to the maximum antenna gain 3.92 dBi (850 MHz), 2.51 dBi (1900 MHz). OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application zowRX9QJxJDmEh/RQKpKmw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Medtronic Monitoring, Inc.
8200 Coral Sea Street NE MVS11
Mounds View, MN 55112
United States
  Date of Grant: 05/09/2014

Application Dated: 05/08/2014
 
Attention: Charles Farlow , Program Director, Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XOH-ZLINK2
Name of Grantee:  Medtronic Monitoring, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS/EDGE/CDMA/UMTS/HSPA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.4 2.5  PM 247KGXW
22H 824.2  -  848.8 1.07 2.5  PM 241KG7W
22H 826.4  -  846.6 0.69 2.5  PM 4M17F9W
24E 1850.2  -  1909.8 1.12 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.87 2.5  PM 235KG7W
24E 1852.4  -  1907.6 0.68 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.74 2.5  PM 1M38F9W
22H 824.7  -  843.3 0.85 2.5  PM 1M37F9W
90 817.9  -  823.1 0.28 2.5  PM 1M28F9W

Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. Approval is limited to the maximum antenna gain 3.92 dBi (850 MHz), 2.51 dBi (1900 MHz). OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



TCB Grant - Application RTXgBZ2YInNwXoYvdIao9Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PCTEST Engineering Laboratory, LLC
7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 05/14/2015

Application Dated: 05/14/2015
Medtronic Monitoring, Inc.
8200 Coral Sea Street NE
MVS11
Mounds View, MN 55112
 
Attention: Charles Farlow , Program Director, Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XOH-ZLINK2
Name of Grantee:  Medtronic Monitoring, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: GSM/ GPRS/ EDGE/ CDMA/ UMTS/HSPA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.4 2.5  PM 247KGXW
22H 824.2  -  848.8 1.07 2.5  PM 241KG7W
22H 826.4  -  846.6 0.69 2.5  PM 4M17F9W
24E 1850.2  -  1909.8 1.12 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.87 2.5  PM 235KG7W
24E 1852.4  -  1907.6 0.68 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.74 2.5  PM 1M38F9W
22H 824.7  -  843.3 0.85 2.5  PM 1M37F9W
90 817.9  -  823.1 0.28 2.5  PM 1M28F9W

Class II Permissive Change.

Power listed is conducted. This Class II Permissive Change is to integrate this module into a device with antenna having a maximum gain 3.92 dBi (850 MHz), 2.51 dBi (1900 MHz) including the insertion loss of matching circuitry. Additonally, this Permissive Change covers BC0 and BC1 CDMA cellular operation with the device integrated into the host device as described in this filing and within the specific usuage conditons as documented in the host user manual and RF Exposure report. The antenna(s) used for this transmitter must not be co-loated or operating in conjunction with any other antenna or transmitter, except ain accordance with FCC multi-transmitter product procedures, or as documented in this filing. SAR complaince has been established in the host product(s) as tested in this filing, and can be used in host product(s) with substantially similar physical dimensions, constrcution, and electrical and RF characteristics. End-users must be provided with specific information required to staisfy RF exposure compliance for all final host devices. Compliance of this device in all final host configurations is the responsibility of the Grantee. The highest reported SAR for stand-alone and simultaneous use conditions is 1.43 W/kg and 1.51 W/kg, respectively.


EAS Grant - Application RTXgBZ2YInNwXoYvdIao9Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Medtronic Monitoring, Inc.
8200 Coral Sea Street NE MVS11
Mounds View, MN 55112
United States
  Date of Grant: 05/14/2015

Application Dated: 05/14/2015
 
Attention: Charles Farlow , Program Director, Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XOH-ZLINK2
Name of Grantee:  Medtronic Monitoring, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: GSM/ GPRS/ EDGE/ CDMA/ UMTS/HSPA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.4 2.5  PM 247KGXW
22H 824.2  -  848.8 1.07 2.5  PM 241KG7W
22H 826.4  -  846.6 0.69 2.5  PM 4M17F9W
24E 1850.2  -  1909.8 1.12 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.87 2.5  PM 235KG7W
24E 1852.4  -  1907.6 0.68 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.74 2.5  PM 1M38F9W
22H 824.7  -  843.3 0.85 2.5  PM 1M37F9W
90 817.9  -  823.1 0.28 2.5  PM 1M28F9W

Class II Permissive Change.

Power listed is conducted. This Class II Permissive Change is to integrate this module into a device with antenna having a maximum gain 3.92 dBi (850 MHz), 2.51 dBi (1900 MHz) including the insertion loss of matching circuitry. Additonally, this Permissive Change covers BC0 and BC1 CDMA cellular operation with the device integrated into the host device as described in this filing and within the specific usuage conditons as documented in the host user manual and RF Exposure report. The antenna(s) used for this transmitter must not be co-loated or operating in conjunction with any other antenna or transmitter, except ain accordance with FCC multi-transmitter product procedures, or as documented in this filing. SAR complaince has been established in the host product(s) as tested in this filing, and can be used in host product(s) with substantially similar physical dimensions, constrcution, and electrical and RF characteristics. End-users must be provided with specific information required to staisfy RF exposure compliance for all final host devices. Compliance of this device in all final host configurations is the responsibility of the Grantee. The highest reported SAR for stand-alone and simultaneous use conditions is 1.43 W/kg and 1.51 W/kg, respectively.



TCB Grant - Application l0GpWINsmsJzRMHOMV91Nw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
Date of Grant: 05/15/2014

Application Dated: 05/14/2014
Medtronic Monitoring, Inc.
8200 Coral Sea Street NE
MVS11
Mounds View, MN 55112
 
Attention: Charles Farlow , Program Director, Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XOH-ZLINK2
Name of Grantee:  Medtronic Monitoring, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS/EDGE/CDMA/UMTS/HSPA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.4 2.5  PM 247KGXW
22H 824.2  -  848.8 1.07 2.5  PM 241KG7W
22H 826.4  -  846.6 0.69 2.5  PM 4M17F9W
24E 1850.2  -  1909.8 1.12 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.87 2.5  PM 235KG7W
24E 1852.4  -  1907.6 0.68 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.74 2.5  PM 1M38F9W
22H 824.7  -  843.3 0.85 2.5  PM 1M37F9W
90 817.9  -  823.1 0.28 2.5  PM 1M28F9W

Power listed is conducted. This Class II Permissive Change is to integrate this module into device with antenna having maximum gain 3.92 dBi (850 MHz), 2.51 dBi (1900 MHz) including the insertion loss of matching circuitry. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as documented in this filing. SAR compliance has been established in the host product(s) as tested in this filing, and can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. Compliance of this device in all final host configurations is the responsibility of the Grantee. The highest reported SAR is 1.43 W/kg.

EAS Grant - Application l0GpWINsmsJzRMHOMV91Nw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Medtronic Monitoring, Inc.
8200 Coral Sea Street NE MVS11
Mounds View, MN 55112
United States
  Date of Grant: 05/15/2014

Application Dated: 05/14/2014
 
Attention: Charles Farlow , Program Director, Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XOH-ZLINK2
Name of Grantee:  Medtronic Monitoring, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS/EDGE/CDMA/UMTS/HSPA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.4 2.5  PM 247KGXW
22H 824.2  -  848.8 1.07 2.5  PM 241KG7W
22H 826.4  -  846.6 0.69 2.5  PM 4M17F9W
24E 1850.2  -  1909.8 1.12 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.87 2.5  PM 235KG7W
24E 1852.4  -  1907.6 0.68 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.74 2.5  PM 1M38F9W
22H 824.7  -  843.3 0.85 2.5  PM 1M37F9W
90 817.9  -  823.1 0.28 2.5  PM 1M28F9W

Power listed is conducted. This Class II Permissive Change is to integrate this module into device with antenna having maximum gain 3.92 dBi (850 MHz), 2.51 dBi (1900 MHz) including the insertion loss of matching circuitry. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as documented in this filing. SAR compliance has been established in the host product(s) as tested in this filing, and can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. Compliance of this device in all final host configurations is the responsibility of the Grantee. The highest reported SAR is 1.43 W/kg.



Mail To: