FCC ID XOJ-WA2000

FCC ID	XOJ-WA2000
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	XOJ
Product Code	WA2000
Applicant Business	TIBBO TECHNOLOGY 🇹🇼
Related Domains	tibbo.com
Equipment Class	802.11 IoT Module
Test Firm	Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch

Frequency Range	Application Purpose	Final Action Date
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2018-10-24
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2018-10-24
5180-5240 MHz	Change in identification of presently authorized equipment. Original FCC ID: 2ADWC-AI7697HD Grant Date: 10/25/2017	2018-08-10
2402-2480 MHz	Change in identification of presently authorized equipment. Original FCC ID: 2ADWC-AI7697HD Grant Date: 10/25/2017	2018-08-10

Document	Type	Available	File
External Photos	External Photos	2019-02-06	PDF 72.3 KB
Label Info	ID Label/Location Info	2018-08-10	PDF 22 KB
Test Setup Photos	Test Setup Photos	2019-04-22	PDF 1.1 MB
Test Report DTS	Test Report	2018-10-24	PDF 935.6 KB
Test Report DTS BLE	Test Report	2018-10-24	PDF 559.6 KB
Test Report NII	Test Report	2018-10-24	PDF 2.7 MB
Class II Permissive Change Cover Letter	Cover Letter(s)	2018-10-24	PDF 243 KB
Class II Permissive Change Letter	Cover Letter(s)	2018-10-24	PDF 243 KB
Confidentiality Letter	Cover Letter(s)	2018-10-24	PDF 230 KB
Confidentiality Request Letter	Cover Letter(s)	2018-10-24	PDF 230 KB
POA	Cover Letter(s)	2018-10-24	PDF 258 KB
Power of Attorney	Cover Letter(s)	2018-10-24	PDF 258 KB
Change in ID Permission Letter - Original Applicant	Cover Letter(s)	2018-08-10	PDF 283.9 KB
Change in ID Request Letter - New Applicant	Cover Letter(s)	2018-08-10	PDF 280.5 KB
Confidentiality Request Letter	Cover Letter(s)	2018-08-10	PDF 266.9 KB
POA	Cover Letter(s)	2018-08-10	PDF 300.2 KB
MPE Report	RF Exposure Info	2018-10-24	PDF 195.2 KB

Application ID	a4InZAvJO6X8J5+olqMqBA==
Final Action Date	2018-10-24
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0019037241
Model	WA2000
Frequency Range	5180-5240 MHz
Equipment Class	NII - Unlicensed National Information Infrastructure TX
Device Description	802.11 IoT Module
Responsible Party	Dmitry Slepov, Manager Director, dima@tibbo.com , 886-2-26925443
Test Firm	Eric Lin, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, eric-wp.lin@tw.bureauveritas.com , +886-3-2641570
TCB Email	TEI@TIMCOENGR.COM
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	Yes
Short-Term Confidentiality Date	04/22/2019
Long-Term Confidentiality	Yes
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes.

Application ID	Date	Purpose
a4InZAvJO6X8J5+olqMqBA==	2018-10-24	Class II permissive change or modification of presently authorized equipment
YZ/5EC+6BMHfOcqvo7kRMA==	2018-10-24	Class II permissive change or modification of presently authorized equipment
YtfKlOWmTjoqcTpaBn152Q==	2018-08-10	Change in identification of presently authorized equipment. Original FCC ID: 2ADWC-AI7697HD Grant Date: 10/25/2017
QNNdevYCuU/GF9QtcxZnoQ==	2018-08-10	Change in identification of presently authorized equipment. Original FCC ID: 2ADWC-AI7697HD Grant Date: 10/25/2017

Frequency	Output	Rules	Grant Notes
2402-2480 MHz	0.004	15C	CC
2402-2480 MHz	0.281	15C	CC
2412-2462 MHz	0.281	15C	CC
5180-5240 MHz	0.026	15E	CC
5745-5825 MHz	0.027	15E	CC

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 10/24/2018

Application Dated: 10/23/2018

TIBBO TECHNOLOGY

9F-3, NO. 31, LANE 169, KANG-NING ST., HSI-CHIH,

TAIPEI, 221
Taiwan

Attention: Dmitry Slepov , Manager Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XOJ-WA2000

Name of Grantee:	TIBBO TECHNOLOGY

Equipment Class:	Digital Transmission System
Notes:	802.11 IoT Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.004
CC	15C	2412.0 - 2462.0	0.281

Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

TIBBO TECHNOLOGY
9F-3, NO. 31, LANE 169, KANG-NING ST., HSI-CHIH, P.O. Box ,
TAIPEI, 221
Taiwan

Date of Grant: 10/24/2018

Application Dated: 10/23/2018

Attention: Dmitry Slepov , Manager Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XOJ-WA2000

Name of Grantee:	TIBBO TECHNOLOGY

Equipment Class:	Digital Transmission System
Notes:	802.11 IoT Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.004
CC	15C	2412.0 - 2462.0	0.281

Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application YtfKlOWmTjoqcTpaBn152Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 08/10/2018

Application Dated: 08/09/2018

TIBBO TECHNOLOGY

9F-3, NO. 31, LANE 169, KANG-NING ST., HSI-CHIH,

TAIPEI, 221
Taiwan

Attention: Dmitry Slepov , Manager Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XOJ-WA2000

Name of Grantee:	TIBBO TECHNOLOGY

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 IoT Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5240.0	0.026
CC	15E	5745.0 - 5825.0	0.027

Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

TIBBO TECHNOLOGY
9F-3, NO. 31, LANE 169, KANG-NING ST., HSI-CHIH, P.O. Box ,
TAIPEI, 221
Taiwan

Date of Grant: 08/10/2018

Application Dated: 08/09/2018

Attention: Dmitry Slepov , Manager Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XOJ-WA2000

Name of Grantee:	TIBBO TECHNOLOGY

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 IoT Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5240.0	0.026
CC	15E	5745.0 - 5825.0	0.027

Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application QNNdevYCuU/GF9QtcxZnoQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 08/10/2018

Application Dated: 08/09/2018

TIBBO TECHNOLOGY

9F-3, NO. 31, LANE 169, KANG-NING ST., HSI-CHIH,

TAIPEI, 221
Taiwan

Attention: Dmitry Slepov , Manager Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XOJ-WA2000

Name of Grantee:	TIBBO TECHNOLOGY

Equipment Class:	Digital Transmission System
Notes:	802.11 IoT Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.004
CC	15C	2402.0 - 2480.0	0.281

Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

TIBBO TECHNOLOGY
9F-3, NO. 31, LANE 169, KANG-NING ST., HSI-CHIH, P.O. Box ,
TAIPEI, 221
Taiwan

Date of Grant: 08/10/2018

Application Dated: 08/09/2018

Attention: Dmitry Slepov , Manager Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XOJ-WA2000

Name of Grantee:	TIBBO TECHNOLOGY

Equipment Class:	Digital Transmission System
Notes:	802.11 IoT Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.004
CC	15C	2402.0 - 2480.0	0.281

Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application a4InZAvJO6X8J5+olqMqBA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 10/24/2018

Application Dated: 10/23/2018

TIBBO TECHNOLOGY

9F-3, NO. 31, LANE 169, KANG-NING ST., HSI-CHIH,

TAIPEI, 221
Taiwan

Attention: Dmitry Slepov , Manager Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XOJ-WA2000

Name of Grantee:	TIBBO TECHNOLOGY

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 IoT Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5240.0	0.026
CC	15E	5745.0 - 5825.0	0.027

Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

TIBBO TECHNOLOGY
9F-3, NO. 31, LANE 169, KANG-NING ST., HSI-CHIH, P.O. Box ,
TAIPEI, 221
Taiwan

Date of Grant: 10/24/2018

Application Dated: 10/23/2018

Attention: Dmitry Slepov , Manager Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XOJ-WA2000

Name of Grantee:	TIBBO TECHNOLOGY

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 IoT Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5240.0	0.026
CC	15E	5745.0 - 5825.0	0.027

Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To:

802.11 IoT Module

by TIBBO TECHNOLOGY

Grantee Code: XOJ Product Code: WA2000

Latest application date: 2018-10-24

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application YZ/5EC+6BMHfOcqvo7kRMA==

EAS Grant - Application YZ/5EC+6BMHfOcqvo7kRMA==

TCB Grant - Application YtfKlOWmTjoqcTpaBn152Q==

EAS Grant - Application YtfKlOWmTjoqcTpaBn152Q==

TCB Grant - Application QNNdevYCuU/GF9QtcxZnoQ==

EAS Grant - Application QNNdevYCuU/GF9QtcxZnoQ==

TCB Grant - Application a4InZAvJO6X8J5+olqMqBA==

EAS Grant - Application a4InZAvJO6X8J5+olqMqBA==