FCC ID XPB-LE

LE Series Wireless Lock

by Schlage Lock Company

Grantee Code: XPB   Product Code: LE
Latest application date: 2017-01-24

FCC ID Device Details

FCC IDXPB-LE
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXPB
Product CodeLE
Applicant BusinessSchlage Lock Company 🇺🇸
Related Domains allegion.com
Equipment ClassLE Series Wireless Lock
Test FirmWillow Run Test Labs, LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
0.125 MHzOriginal Equipment2017-01-24
13.56 MHzOriginal Equipment2017-01-24

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2017-01-24PDF 2 MB
Internal Photos Rev 2Internal Photos2017-01-24PDF 944.7 KB
External PhotosExternal Photos2017-01-24PDF 76.2 KB
Label Info RevisedID Label/Location Info2017-01-24PDF 473.5 KB
Operational DescriptionOperational Description2017-01-24PDF 313 KB
Test PhotosTest Setup Photos2017-01-24PDF 292.5 KB
Test Report Rev 3Test Report2017-01-24PDF 2.8 MB
Agency LetterCover Letter(s)2017-01-24PDF 258.8 KB
Agency LettersCover Letter(s)2017-01-24PDF 258.8 KB
Comments and ResponseCover Letter(s)2017-01-24PDF 119.5 KB
Confidentiality LetterCover Letter(s)2017-01-24PDF 1 MB
Cover LettersCover Letter(s)2017-01-24PDF 1.1 MB
Technical Comments and ResponseCover Letter(s)2017-01-24PDF 119.5 KB
RF Exposure InfoRF Exposure Info2017-01-24PDF 23.4 KB
RF Exposure Info Rev 122216RF Exposure Info2017-01-24PDF 23.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 71.8 KB
Schematics Metadata onlySchematicsPDF 2.4 MB
Schematics Corrected Metadata onlySchematicsPDF 1.6 MB
Schematics Corrected rev2 Metadata onlySchematicsPDF 1.6 MB
BOM Metadata onlyParts List/Tune Up InfoPDF 1.2 MB
Parts List Corrected Metadata onlyParts List/Tune Up InfoPDF 1.2 MB

Application Information

Application IDj33IFvQPjrDaZhZ2lnjrkg==
Final Action Date2017-01-24
Application PurposeOriginal Equipment
Applicant FRN0019057363
ModelLE
Frequency Range0.125 MHz
Equipment ClassDCD - Part 15 Low Power Transmitter Below 1705 kHz
Device DescriptionLE Series Wireless Lock
Responsible PartyFrank Nardelli, Lead Hardware Engineer, frank.nardelli@allegion.com , 317-810-3193
AgentJoseph Joseph Joseph, Willow Run Test Labs, LLC, info@wrtest.com , 7342529785
Technical ContactJoseph D Brunett, Willow Run Test Labs, LLC, info@wrtest.com , 7342529785
Test FirmJoseph Brunett, Willow Run Test Labs, LLC, joe@wrtest.com , 7342529785
TCB Emailhotline@acbcert.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsThis device is approved for co-location with one of the following integrated modules: FCC ID: QOQBGM111 and FCC ID: Z64-CC3100MODR1. This device must be installed with a minimum operating distance of 20 cm between the equipment and user.

Applications

Application IDDatePurpose
j33IFvQPjrDaZhZ2lnjrkg==2017-01-24Original Equipment
W7NNjvQE2JFCRMQvSCbWyA==2017-01-24Original Equipment

Equipment Authorization

FrequencyRulesGrant Notes
0.125 MHz15CCC
13.56 MHz15CCC

Grants

TCB Grant - Application W7NNjvQE2JFCRMQvSCbWyA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/24/2017

Application Dated: 12/23/2016
Schlage Lock Company
11819 N. Pennsylvania Street
Carmel, IN 46032
 
Attention: Frank Nardelli , Lead Hardware Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPB-LE
Name of Grantee:  Schlage Lock Company
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: LE Series Wireless Lock
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  

This device is approved for co-location with one of the following integrated modules: FCC ID: QOQBGM111 and FCC ID: Z64-CC3100MODR1. This device must be installed with a minimum operating distance of 20 cm between the equipment and user.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application W7NNjvQE2JFCRMQvSCbWyA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Schlage Lock Company
11819 N. Pennsylvania Street
Carmel, IN 46032
United States
  Date of Grant: 01/24/2017

Application Dated: 12/23/2016
 
Attention: Frank Nardelli , Lead Hardware Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPB-LE
Name of Grantee:  Schlage Lock Company
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: LE Series Wireless Lock
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  

This device is approved for co-location with one of the following integrated modules: FCC ID: QOQBGM111 and FCC ID: Z64-CC3100MODR1. This device must be installed with a minimum operating distance of 20 cm between the equipment and user.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application j33IFvQPjrDaZhZ2lnjrkg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/24/2017

Application Dated: 12/23/2016
Schlage Lock Company
11819 N. Pennsylvania Street
Carmel, IN 46032
 
Attention: Frank Nardelli , Lead Hardware Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPB-LE
Name of Grantee:  Schlage Lock Company
Equipment Class: Part 15 Low Power Transmitter Below 1705 kHz
Notes: LE Series Wireless Lock
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 0.125  -  0.125  

This device is approved for co-location with one of the following integrated modules: FCC ID: QOQBGM111 and FCC ID: Z64-CC3100MODR1. This device must be installed with a minimum operating distance of 20 cm between the equipment and user.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application j33IFvQPjrDaZhZ2lnjrkg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Schlage Lock Company
11819 N. Pennsylvania Street
Carmel, IN 46032
United States
  Date of Grant: 01/24/2017

Application Dated: 12/23/2016
 
Attention: Frank Nardelli , Lead Hardware Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPB-LE
Name of Grantee:  Schlage Lock Company
Equipment Class: Part 15 Low Power Transmitter Below 1705 kHz
Notes: LE Series Wireless Lock
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 0.125  -  0.125  

This device is approved for co-location with one of the following integrated modules: FCC ID: QOQBGM111 and FCC ID: Z64-CC3100MODR1. This device must be installed with a minimum operating distance of 20 cm between the equipment and user.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: