FCC ID XPY2AGQN1NNN
LTE CAT-M1 modem
by u-blox AG
Grantee Code: XPY Product Code: 2AGQN1NNN
Latest application date: 2018-03-08
Device Images
FCC ID Device Details
| FCC ID | XPY2AGQN1NNN |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XPY |
| Product Code | 2AGQN1NNN |
| Applicant Business | u-blox AG 🇨🇭 |
| Related Domains |  u-blox.com |
| Equipment Class | LTE CAT-M1 modem |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 777-786.9 MHz | Class II permissive change or modification of presently authorized equipment | 2018-03-08 |
| 777-786.9 MHz | Original Equipment | 2017-03-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2017-09-10 | PDF 3 MB |
| Photos-Internal | Internal Photos | 2018-09-05 | PDF 461.1 KB |
| Internal Photos | Internal Photos | 2017-09-10 | PDF 1.7 MB |
| Photos-External | External Photos | 2018-09-05 | PDF 417 KB |
| External Photos | External Photos | 2017-09-10 | PDF 5.4 MB |
| Label | ID Label/Location Info | 2017-03-22 | PDF 3 MB |
| Photos-Test Setup (RF) | Test Setup Photos | 2018-09-05 | PDF 489 KB |
| Test Setup Photos | Test Setup Photos | 2017-09-10 | PDF 803.1 KB |
| Test Report-MPE | RF Exposure Info | 2018-03-08 | PDF 237.1 KB |
| Test Report-TNB_R1 | Test Report | 2018-03-08 | PDF 1 MB |
| Test Report | Test Report | 2017-03-22 | PDF 2.5 MB |
| Attestation-Confidentiality Request_R1 | Cover Letter(s) | 2018-03-08 | PDF 472 KB |
| Cover Letter-Agent Authorization | Cover Letter(s) | 2018-03-08 | PDF 142.9 KB |
| Cover Letter-Description of Change_R1 | Cover Letter(s) | 2018-03-08 | PDF 353.1 KB |
| Agents Letter | Cover Letter(s) | 2017-03-22 | PDF 331.1 KB |
| Confidential Letter | Cover Letter(s) | 2017-03-22 | PDF 54.6 KB |
| RF Exposure Report | RF Exposure Info | 2017-03-22 | PDF 538.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 54.3 KB | |
| Schematics Metadata only | Schematics | PDF 397.7 KB | |
| Operational Description Metadata only | Operational Description | PDF 1.5 MB | |
| Technical-Operational Description_Antenna Spec._R1 Metadata only | Operational Description | PDF 460.6 KB | |
| Technical-Operational Description_LTE Cat M1 Module driver board trace descripti Metadata only | Operational Description | PDF 157.4 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 171.7 KB | |
| Tune Up Metadata only | Parts List/Tune Up Info | PDF 159.2 KB |
Application Information
| Application ID | GEIUENskzPhDLFV0IxdQEg== |
|---|---|
| Final Action Date | 2018-03-08 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019077858 |
| Model | 2AGQN1NNN |
| Frequency Range | 777-786.9 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | LTE CAT-M1 modem |
| Responsible Party | Giulio Comar, Certification Manager, giulio.comar@u-blox.com , +390402529400 |
| Agent | Annie Annie Annie, Bureau Veritas Consumer Products Services (H.K.) L, annie.cheng@tw.bureauveritas.com  , 88633183232 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com  , +886-3-2600884 |
| TCB Email | tcb@us.bureauveritas.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 09/05/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change for adding bandwidth by software enabling and adding Antenna in Single Modular Approval. Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multitransmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 13 dBi for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP power limits as specified in Part 27. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| GEIUENskzPhDLFV0IxdQEg== | 2018-03-08 | Class II permissive change or modification of presently authorized equipment |
| 6kIJ72dSAB0YjDG64rkSTg== | 2017-03-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application GEIUENskzPhDLFV0IxdQEg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 03/08/2018 Application Dated: 03/07/2018 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPY2AGQN1NNN |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | LTE CAT-M1 modem |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 777.0 - 786.9 | 0.195 | 4300.0 Hz | 1M09F9W | |
| 27 | 779.5 - 784.5 | 0.187 | 0.002 PM | 1M18G7D | |
| 27 | 779.5 - 784.5 | 0.179 | 0.002 PM | 1M18D7W | |
| 27 | 782.0 - 782.0 | 0.175 | 0.002 PM | 1M20G7D | |
| 27 | 782.0 - 782.0 | 0.175 | 0.002 PM | 1M18D7W |
| Class II Permissive Change for adding bandwidth by software enabling and adding Antenna in Single Modular Approval. Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multitransmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 13 dBi for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP power limits as specified in Part 27. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. |
EAS Grant - Application GEIUENskzPhDLFV0IxdQEg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 03/08/2018 Application Dated: 03/07/2018 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPY2AGQN1NNN |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | LTE CAT-M1 modem |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 777.0 - 786.9 | 0.195 | 4300.0 Hz | 1M09F9W | |
| 27 | 779.5 - 784.5 | 0.187 | 0.002 PM | 1M18G7D | |
| 27 | 779.5 - 784.5 | 0.179 | 0.002 PM | 1M18D7W | |
| 27 | 782.0 - 782.0 | 0.175 | 0.002 PM | 1M20G7D | |
| 27 | 782.0 - 782.0 | 0.175 | 0.002 PM | 1M18D7W |
| Class II Permissive Change for adding bandwidth by software enabling and adding Antenna in Single Modular Approval. Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multitransmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 13 dBi for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP power limits as specified in Part 27. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 03/22/2017 Application Dated: 03/22/2017 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPY2AGQN1NNN |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | LTE Cat-M1 Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 777.0 - 786.9 | 0.195 | 4300.0 Hz | 1M09F9W |
| Single Modular Approval. Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multitransmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 13 dBi for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP power limits as specified in Part 27. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. |
EAS Grant - Application 6kIJ72dSAB0YjDG64rkSTg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 03/22/2017 Application Dated: 03/22/2017 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPY2AGQN1NNN |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | LTE Cat-M1 Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 777.0 - 786.9 | 0.195 | 4300.0 Hz | 1M09F9W |
| Single Modular Approval. Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multitransmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 13 dBi for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP power limits as specified in Part 27. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. |
| Mail To: |