FCC ID XPYELLAW133

WLAN & Bluetooth Module

by u-blox AG

Grantee Code: XPY   Product Code: ELLAW133
Latest application date: 2015-07-10

FCC ID Device Details

FCC IDXPYELLAW133
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXPY
Product CodeELLAW133
Applicant Businessu-blox AG 🇨🇭
Related Domains u-blox.com
Equipment ClassWLAN & Bluetooth Module
Test Firm7layers AG

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2015-07-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-07-10
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: PV7-WIBEAR11N-SF2 Grant Date: 04/14/20142015-05-08
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: PV7-WIBEAR11N-SF2 Grant Date: 04/14/20142015-05-08

Exhibits

DocumentTypeAvailableFile
Internal photoInternal Photos2015-09-30PDF 664.3 KB
External photoExternal Photos2015-07-10PDF 276 KB
External PhotosExternal Photos2015-05-08PDF 126.2 KB
ID label/Location infoID Label/Location Info2015-07-10PDF 117.1 KB
LabelID Label/Location Info2015-05-08PDF 259.9 KB
Test setup photoTest Setup Photos2015-07-10PDF 530.7 KB
Test reportTest Report2015-07-10PDF 815.1 KB
Antenna InformationCover Letter(s)2015-07-10PDF 80.9 KB
Applicant Letter_re-assessmentCover Letter(s)2015-07-10PDF 53 KB
FCC_IC_C2PC_ApplicantLetter_re-assessmentCover Letter(s)2015-07-10PDF 53 KB
Letter_of_AuthorizationCover Letter(s)2015-07-10PDF 135.4 KB
Letter_of_Authorization_7Layers-Cover Letter(s)2015-07-10PDF 135.4 KB
confidentialityCover Letter(s)2015-07-10PDF 372 KB
Authorization LetterCover Letter(s)2015-05-08PDF 213.1 KB
Request for a Change in IDCover Letter(s)2015-05-08PDF 444 KB

Application Information

Application IDhJjaZqc3DM7hhrmb971HNw==
Final Action Date2015-07-10
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019077858
ModelELLAW133
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWLAN & Bluetooth Module
Responsible PartyGiulio Comar, Certification Manager, giulio.comar@u-blox.com , +390402529400
Technical ContactGiulio Comar, u-blox AG, giulio.comar@u-blox.com , 390402529400
Non-Technical ContactGiulio Comar, u-blox AG, giulio.comar@u-blox.com , 390402529400
Test FirmRobert Machulec, 7layers AG, robert.machulec@7layers.de , 49-2102-749-313
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/30/2015
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single modular: Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with transmitter operating conditions for satisfying RF exposure compliance. The approval type for the WiBear11n variants is a limited modular approval due to the absence of a shielding. This requires any manufacturer of host equipment containing the WiBear11n module to ask for an approval of their design by the holder of that grant. This device has 20/40 MHz bandwidth modes. C2PC : This change is to add new host(Model number : MIB HS) with new antenna.

Applications

Application IDDatePurpose
hJjaZqc3DM7hhrmb971HNw==2015-07-10Class II permissive change or modification of presently authorized equipment
48hi6p1IoY/KCkWhugH64Q==2015-07-10Class II permissive change or modification of presently authorized equipment
pmwhlXdzYsRsc0j1CaEgqw==2015-05-08Change in identification of presently authorized equipment. Original FCC ID: PV7-WIBEAR11N-SF2 Grant Date: 04/14/2014
QhFJuCMuBLPR71LPFdGEUQ==2015-05-08Change in identification of presently authorized equipment. Original FCC ID: PV7-WIBEAR11N-SF2 Grant Date: 04/14/2014

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.008000015CCC
2412-2462 MHz0.199000015CCC

Grants

TCB Grant - Application QhFJuCMuBLPR71LPFdGEUQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 05/08/2015

Application Dated: 05/08/2015
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYELLAW133
Name of Grantee:  u-blox AG
Equipment Class: Digital Transmission System
Notes: WLAN & Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.199  

Limited Single modular: Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with transmitter operating conditions for satisfying RF exposure compliance.

The approval type for the WiBear11n variants is a limited modular approval due to the absence of a shielding. This requires any manufacturer of host equipment containing the WiBear11n module to ask for an approval of their design by the holder of that grant. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application QhFJuCMuBLPR71LPFdGEUQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 05/08/2015

Application Dated: 05/08/2015
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYELLAW133
Name of Grantee:  u-blox AG
Equipment Class: Digital Transmission System
Notes: WLAN & Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.199  

Limited Single modular: Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with transmitter operating conditions for satisfying RF exposure compliance.

The approval type for the WiBear11n variants is a limited modular approval due to the absence of a shielding. This requires any manufacturer of host equipment containing the WiBear11n module to ask for an approval of their design by the holder of that grant. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application pmwhlXdzYsRsc0j1CaEgqw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 05/08/2015

Application Dated: 05/08/2015
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYELLAW133
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN & Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  

Limited Single modular: Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with transmitter operating conditions for satisfying RF exposure compliance.

The approval type for the WiBear11n variants is a limited modular approval due to the absence of a shielding. This requires any manufacturer of host equipment containing the WiBear11n module to ask for an approval of their design by the holder of that grant.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application pmwhlXdzYsRsc0j1CaEgqw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 05/08/2015

Application Dated: 05/08/2015
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYELLAW133
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN & Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  

Limited Single modular: Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with transmitter operating conditions for satisfying RF exposure compliance.

The approval type for the WiBear11n variants is a limited modular approval due to the absence of a shielding. This requires any manufacturer of host equipment containing the WiBear11n module to ask for an approval of their design by the holder of that grant.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application hJjaZqc3DM7hhrmb971HNw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/10/2015

Application Dated: 06/24/2015
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYELLAW133
Name of Grantee:  u-blox AG
Equipment Class: Digital Transmission System
Notes: WLAN & Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.199  

Limited Single modular: Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with transmitter operating conditions for satisfying RF exposure compliance. The approval type for the WiBear11n variants is a limited modular approval due to the absence of a shielding. This requires any manufacturer of host equipment containing the WiBear11n module to ask for an approval of their design by the holder of that grant.

This device has 20/40 MHz bandwidth modes.

C2PC : This change is to add new host(Model number : MIB HS) with new antenna.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application hJjaZqc3DM7hhrmb971HNw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 07/10/2015

Application Dated: 06/24/2015
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYELLAW133
Name of Grantee:  u-blox AG
Equipment Class: Digital Transmission System
Notes: WLAN & Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.199  

Limited Single modular: Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with transmitter operating conditions for satisfying RF exposure compliance. The approval type for the WiBear11n variants is a limited modular approval due to the absence of a shielding. This requires any manufacturer of host equipment containing the WiBear11n module to ask for an approval of their design by the holder of that grant.

This device has 20/40 MHz bandwidth modes.

C2PC : This change is to add new host(Model number : MIB HS) with new antenna.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 48hi6p1IoY/KCkWhugH64Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/10/2015

Application Dated: 06/29/2015
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYELLAW133
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN & Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  

Limited Single modular: Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with transmitter operating conditions for satisfying RF exposure compliance.

The approval type for the WiBear11n variants is a limited modular approval due to the absence of a shielding. This requires any manufacturer of host equipment containing the WiBear11n module to ask for an approval of their design by the holder of that grant.

C2PC : This change is to add new host(Model number : MIB HS) with new antenna.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 48hi6p1IoY/KCkWhugH64Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 07/10/2015

Application Dated: 06/29/2015
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYELLAW133
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN & Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  

Limited Single modular: Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator in the products as specified in this filing. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with transmitter operating conditions for satisfying RF exposure compliance.

The approval type for the WiBear11n variants is a limited modular approval due to the absence of a shielding. This requires any manufacturer of host equipment containing the WiBear11n module to ask for an approval of their design by the holder of that grant.

C2PC : This change is to add new host(Model number : MIB HS) with new antenna.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: