FCC ID XPYJODYW164
WLAN/Bluetooth host-based multiradio module JODY-W1
by u-blox AG
Grantee Code: XPY Product Code: JODYW164
Latest application date: 2021-07-05
FCC ID Device Details
| FCC ID | XPYJODYW164 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XPY |
| Product Code | JODYW164 |
| Applicant Business | u-blox AG 🇨🇭 |
| Related Domains |  u-blox.com |
| Equipment Class | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Test Firm | 7layers GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-07-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-07-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-03-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-12-20 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2018-12-20 |
| 5180-5240 MHz | Original Equipment | 2018-07-20 |
| 2402-2480 MHz | Original Equipment | 2018-07-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Antenna Reference Design Guide | Users Manual | 2018-07-20 | PDF 344.8 KB |
| Data Sheet | Users Manual | 2018-07-20 | PDF 2.6 MB |
| JODY-W1_Photos | Internal Photos | 2021-07-05 | PDF 509.2 KB |
| Internal Photos | Internal Photos | 2018-07-20 | PDF 278.4 KB |
| JODY-W1_Photos | External Photos | 2021-07-05 | PDF 509.2 KB |
| External Photos | External Photos | 2018-07-20 | PDF 278.4 KB |
| Label Location | ID Label/Location Info | 2018-07-20 | PDF 277.6 KB |
| MDE_UBLOX_2104_FCC_Photo_Setups | Test Setup Photos | 2021-07-05 | PDF 457.5 KB |
| Test Setup Photos | Test Setup Photos | 2019-03-20 | PDF 249.7 KB |
| Test Setup Photos | Test Setup Photos | 2018-07-20 | PDF 787.8 KB |
| Test Setup Photos | Test Setup Photos | 2018-07-20 | PDF 621.8 KB |
| MDE_UBLOX_2104_FCC_02_rev02_SIGNED | Test Report | 2021-07-05 | PDF 3.9 MB |
| MDE_UBLOX_2104_FCC_03_rev02_SIGNED | Test Report | 2021-07-05 | PDF 5.3 MB |
| Test Report | Test Report | 2019-03-20 | PDF 988.2 KB |
| Test Report | Test Report | 2018-12-20 | PDF 1.5 MB |
| Test Report | Test Report | 2018-12-20 | PDF 3.6 MB |
| Test Report | Test Report | 2018-07-20 | PDF 4 MB |
| Test Report Simultaneous TX | Test Report | 2018-07-20 | PDF 1.3 MB |
| Test Report part 1 | Test Report | 2018-07-20 | PDF 1.7 MB |
| Test Report part 2 | Test Report | 2018-07-20 | PDF 4.1 MB |
| Test Report part 3 | Test Report | 2018-07-20 | PDF 4.1 MB |
| Test Report part 4 | Test Report | 2018-07-20 | PDF 1.7 MB |
| Variant Attestation | Attestation Statements | 2019-03-20 | PDF 58.1 KB |
| Letter of Agent Authorization for class-II permissive change FCC JODY-W164-03A_r | Cover Letter(s) | 2021-07-05 | PDF 359.2 KB |
| Letter of Application of Class-II Permissive Change FCC JODY-W164-03A_r2 | Cover Letter(s) | 2021-07-05 | PDF 337 KB |
| Letter of request for Confidentiality FCC JODY-W164-03A | Cover Letter(s) | 2021-07-05 | PDF 490.2 KB |
| u-blox_FCC_IC_signature_Authorization_Letter | Cover Letter(s) | 2021-07-05 | PDF 104.7 KB |
| C2PC Cover Letter | Cover Letter(s) | 2019-03-20 | PDF 37.5 KB |
| Cover Letter Reference Test Data | Cover Letter(s) | 2019-03-20 | PDF 49.4 KB |
| Request for Confidentiality | Cover Letter(s) | 2019-03-20 | PDF 41.9 KB |
| Agent Authorization | Cover Letter(s) | 2018-12-20 | PDF 38.4 KB |
| C2PC Letter | Cover Letter(s) | 2018-12-20 | PDF 39.7 KB |
| Confidentiality Request | Cover Letter(s) | 2018-12-20 | PDF 42.1 KB |
| Software Settings | Cover Letter(s) | 2018-12-20 | PDF 38.2 KB |
| Agent Authorization 7Layers | Cover Letter(s) | 2018-07-20 | PDF 39.7 KB |
| Agent Authorization u-blox | Cover Letter(s) | 2018-07-20 | PDF 111.5 KB |
| Cover Letter Modular Approval | Cover Letter(s) | 2018-07-20 | PDF 121.1 KB |
| Request for Confidentiality | Cover Letter(s) | 2018-07-20 | PDF 43.6 KB |
| RF Exposure | RF Exposure Info | 2018-12-20 | PDF 184.3 KB |
| MPE Calculation | RF Exposure Info | 2018-07-20 | PDF 188.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 249.1 KB | |
| JODY-W164-xxA_Schematic Metadata only | Schematics | PDF 369 KB | |
| Schematics Metadata only | Schematics | PDF 580.5 KB | |
| Schematics Metadata only | Schematics | PDF 177.8 KB | |
| Antenna trace for LMA Metadata only | Operational Description | PDF 580.5 KB | |
| Confidential_Response_to_Inquiry_to_FCC_Tracking_Number_364900 Metadata only | Operational Description | PDF 807.2 KB | |
| Confidential_Ublox_Crystal-Oscillator-Change_KDB-Inquiry Metadata only | Operational Description | PDF 423.6 KB | |
| JODY-W1_TCXO-XTAL Comparison Metadata only | Operational Description | PDF 336.9 KB | |
| Operation Description Metadata only | Operational Description | PDF 798.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 1 MB | |
| Operational Description Metadata only | Operational Description | PDF 401.8 KB | |
| Software Security Configuration Description Metadata only | Operational Description | PDF 138.1 KB | |
| JODY-W164-03A_BOM Metadata only | Parts List/Tune Up Info | PDF 224.3 KB |
Application Information
| Application ID | n15IlMxuCLEKUWqs2ESOoQ== |
|---|---|
| Final Action Date | 2021-07-05 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019077858 |
| Model | JODYW164 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Responsible Party | Giulio Comar, Certification Manager, giulio.comar@u-blox.com , +390402529400 |
| Agent | Imad Imad Imad, 7layers GmbH, Imad.hjije@7layers.com  , 011492102749318 |
| Test Firm | Bernhard Retka, 7layers GmbH, Bernhard.Retka@7layers.com , 0049 2102 749 452 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Output power listed is the aggregate power of all transmitter ports, conducted at the antenna terminals. Device is an 802.11 device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. C2PC covering the replacement of an obsolete component. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| n15IlMxuCLEKUWqs2ESOoQ== | 2021-07-05 | Class II permissive change or modification of presently authorized equipment |
| aY08Chb5I6XzV2Ta+4KRzQ== | 2021-07-05 | Class II permissive change or modification of presently authorized equipment |
| CaLvABQ+hrxASknboBrW0w== | 2019-03-20 | Class II permissive change or modification of presently authorized equipment |
| s1ZUXViEP9AsfGkyYELZYQ== | 2018-12-20 | Class II permissive change or modification of presently authorized equipment |
| gKzPr9zBuv4hETXg2fpceQ== | 2018-12-20 | Class II permissive change or modification of presently authorized equipment |
| rxsjrRSBph4FkOn1ZEs/Hw== | 2018-07-20 | Original Equipment |
| lD2FrKP3A0Xv9sbuTGJxwQ== | 2018-07-20 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.01148 | 15C | CC |
| 2402-2480 MHz | 0.01479 | 15C | CC |
| 2402-2480 MHz | 0.01071 | 15C | CC |
| 2402-2480 MHz | 0.00955 | 15C | CC |
| 2402-2480 MHz | 0.00645 | 15C | CC |
| 2402-2480 MHz | 0.00616 | 15C | CC |
| 2412-2462 MHz | 0.0912 | 15C | CC |
| 2412-2462 MHz | 0.06456 | 15C | CC |
| 5180-5240 MHz | 0.02754 | 15E | CC |
| 5180-5240 MHz | 0.05888 | 15E | CC |
| 5260-5320 MHz | 0.0309 | 15E | CC |
| 5260-5320 MHz | 0.06309 | 15E | CC |
| 5500-5700 MHz | 0.03388 | 15E | CC |
| 5500-5700 MHz | 0.06761 | 15E | CC |
| 5745-5825 MHz | 0.06309 | 15E | CC |
| 5745-5825 MHz | 0.10715 | 15E | CC |
Grants
TCB Grant - Application s1ZUXViEP9AsfGkyYELZYQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/20/2018 Application Dated: 12/20/2018 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01479 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00955 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00616 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.06456 |
| Output power listed is conducted. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. C2PC to allow Limited Modular Approval with new antenna trace layout and power settings. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application s1ZUXViEP9AsfGkyYELZYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 12/20/2018 Application Dated: 12/20/2018 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01479 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00955 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00616 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.06456 |
| Output power listed is conducted. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. C2PC to allow Limited Modular Approval with new antenna trace layout and power settings. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/20/2018 Application Dated: 07/17/2018 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.05888 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.06309 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.06761 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.10715 |
| Output power listed is the aggregate power of all transmitter ports, conducted at the antenna terminals. Device is an 802.11 device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application rxsjrRSBph4FkOn1ZEs/Hw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 07/20/2018 Application Dated: 07/17/2018 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.05888 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.06309 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.06761 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.10715 |
| Output power listed is the aggregate power of all transmitter ports, conducted at the antenna terminals. Device is an 802.11 device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/05/2021 Application Dated: 07/04/2021 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.05888 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.06309 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.06761 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.10715 |
| Output power listed is the aggregate power of all transmitter ports, conducted at the antenna terminals. Device is an 802.11 device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. C2PC covering the replacement of an obsolete component. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application n15IlMxuCLEKUWqs2ESOoQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 07/05/2021 Application Dated: 07/04/2021 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.05888 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.06309 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.06761 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.10715 |
| Output power listed is the aggregate power of all transmitter ports, conducted at the antenna terminals. Device is an 802.11 device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. C2PC covering the replacement of an obsolete component. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/20/2018 Application Dated: 07/17/2018 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01148 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.01071 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00645 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0912 |
| Output power listed is conducted. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application lD2FrKP3A0Xv9sbuTGJxwQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 07/20/2018 Application Dated: 07/17/2018 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01148 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.01071 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00645 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0912 |
| Output power listed is conducted. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/20/2018 Application Dated: 12/20/2018 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.02754 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0309 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.03388 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.06309 |
| Output power listed is conducted. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. C2PC to allow Limited Modular Approval with new antenna trace layout and power settings. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gKzPr9zBuv4hETXg2fpceQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 12/20/2018 Application Dated: 12/20/2018 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.02754 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0309 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.03388 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.06309 |
| Output power listed is conducted. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. C2PC to allow Limited Modular Approval with new antenna trace layout and power settings. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/20/2019 Application Dated: 03/19/2019 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01148 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.01071 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00645 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0912 |
| Output power listed is conducted. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. C2PC Application to allow component changes as described in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application CaLvABQ+hrxASknboBrW0w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 03/20/2019 Application Dated: 03/19/2019 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01148 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.01071 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00645 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0912 |
| Output power listed is conducted. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. C2PC Application to allow component changes as described in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/05/2021 Application Dated: 07/04/2021 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01148 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.01071 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00645 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0912 |
| Output power listed is conducted. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. C2PC covering the replacement of an obsolete component. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application aY08Chb5I6XzV2Ta+4KRzQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 07/05/2021 Application Dated: 07/04/2021 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW164 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01148 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.01071 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00645 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0912 |
| Output power listed is conducted. Modular Approval. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying EMC and RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. C2PC covering the replacement of an obsolete component. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |