FCC ID XPYJODYW167
WLAN/Bluetooth host-based multiradio module JODY-W1
by u-blox AG
Grantee Code: XPY Product Code: JODYW167
Latest application date: 2021-08-22
FCC ID Device Details
| FCC ID | XPYJODYW167 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XPY |
| Product Code | JODYW167 |
| Applicant Business | u-blox AG 🇨🇭 |
| Related Domains |  u-blox.com |
| Equipment Class | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Test Firm | 7layers GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-22 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-22 |
| 2402-2480 MHz | Original Equipment | 2019-07-08 |
| 5180-5240 MHz | Original Equipment | 2019-07-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| JODY-W167_User manual | Users Manual | 2019-07-08 | PDF 3.2 MB |
| JODY-W1_Photos | Internal Photos | 2021-08-22 | PDF 509.2 KB |
| JODY-W167_Internal_Photo | Internal Photos | 2019-07-08 | PDF 403.5 KB |
| JODY-W1_Photos | External Photos | 2021-08-22 | PDF 509.2 KB |
| JODY-W167_External_Photo | External Photos | 2019-07-08 | PDF 268 KB |
| JODY-W167_Label_Location | ID Label/Location Info | 2019-07-08 | PDF 439.8 KB |
| MDE_UBLOX_2104_FCC_Photo_Setups | Test Setup Photos | 2021-08-22 | PDF 457.5 KB |
| MDE_UBLOX_1701_FCCa_FCC15_247_Photo_Report | Test Setup Photos | 2019-07-08 | PDF 533 KB |
| MDE_UBLOX_2104_FCC_04_SIGNED | Test Report | 2021-08-22 | PDF 4.2 MB |
| MDE_UBLOX_2104_FCC_05_SIGNED | Test Report | 2021-08-22 | PDF 5.2 MB |
| MDE_UBLOX_1828_FCCd_SIGNED | Test Report | 2019-07-08 | PDF 3.4 MB |
| MDE_UBLOX_1828_FCCf_SIGNED | Test Report | 2019-07-08 | PDF 1.7 MB |
| MDE_UBLOX_1828_FCCg_SIGNED_reduced_size | Test Report | 2019-07-08 | PDF 5.1 MB |
| Letter of Agent Authorization for class-II permissive change FCC JODY-W167-03A_r | Cover Letter(s) | 2021-08-22 | PDF 358.6 KB |
| Letter of Application of Class-II Permissive Change FCC JODY-W167-03A | Cover Letter(s) | 2021-08-22 | PDF 327.4 KB |
| Letter of request for Confidentiality FCC JODY-W167-03A_r1 | Cover Letter(s) | 2021-08-22 | PDF 490.2 KB |
| u-blox_FCC_IC_signature_Authorization_Letter | Cover Letter(s) | 2021-08-22 | PDF 104.7 KB |
| ACB-FORM-FCC-Modular-Letter_Rev1 | Cover Letter(s) | 2019-07-08 | PDF 175.4 KB |
| FCC_IC_signature_Authorization_Letter | Cover Letter(s) | 2019-07-08 | PDF 111.5 KB |
| JODY-W167_Auth_Letter-FCC | Cover Letter(s) | 2019-07-08 | PDF 39.7 KB |
| JODY-W167_Confidentiality_Request-FCC_r1 | Cover Letter(s) | 2019-07-08 | PDF 43.6 KB |
| FCC - RF exposure evaluation for mobile devices_Rev3 | RF Exposure Info | 2019-07-08 | PDF 188.6 KB |
| JODY-W167_Block_Diagram Metadata only | Block Diagram | PDF 308.8 KB | |
| Confidential_JODY-W167-0xA_Schematic Metadata only | Schematics | PDF 386.1 KB | |
| Confidential_JODY_W167_Schematics Metadata only | Schematics | PDF 185.2 KB | |
| Confidential_JODY-W167_sw_sec_sw_config_desc Metadata only | Operational Description | PDF 84.9 KB | |
| Confidential_Response_to_Inquiry_to_FCC_Tracking_Number_364900 Metadata only | Operational Description | PDF 807.2 KB | |
| Confidential_Ublox_Crystal-Oscillator-Change_KDB-Inquiry Metadata only | Operational Description | PDF 423.6 KB | |
| JODY-W167_AntenneReferenceDesign_r1 Metadata only | Operational Description | PDF 360.6 KB | |
| JODY-W167_Operational Description_r1 Metadata only | Operational Description | PDF 344.5 KB | |
| JODY-W1_TCXO_XTAL Metadata only | Operational Description | PDF 336.9 KB | |
| Confidential_JODY-W167-03A_BOM Metadata only | Parts List/Tune Up Info | PDF 227.2 KB |
Application Information
| Application ID | YExpax49+IKoMqXT/x7KIw== |
|---|---|
| Final Action Date | 2021-08-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019077858 |
| Model | JODYW167 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Responsible Party | Giulio Comar, Certification Manager, giulio.comar@u-blox.com , +390402529400 |
| Agent | Imad Imad Imad, 7layers GmbH, Imad.hjije@7layers.com  , 011492102749318 |
| Test Firm | Bernhard Retka, 7layers GmbH, Bernhard.Retka@7layers.com , 0049 2102 749 452 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power output listed is conducted. Single modular approval. This device supports IEEE 802.11n/ac modes in a 2x2 spatial multiplexing MIMO configuration as described in this filing. This device is granted for use in mobile RF exposure conditions only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains 2.4 GHz WLAN, BT and BLE transmitters. C2PC covering the replacement of an obsolete component. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| YExpax49+IKoMqXT/x7KIw== | 2021-08-22 | Class II permissive change or modification of presently authorized equipment |
| AShAnQ+a+iIJrJbQksVHXA== | 2021-08-22 | Class II permissive change or modification of presently authorized equipment |
| QwxL5QCn5Md5p+XuIOsyMQ== | 2019-07-08 | Original Equipment |
| HtEWWqZpCt5Rt6eETKpuNg== | 2019-07-08 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application YExpax49+IKoMqXT/x7KIw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/22/2021 Application Dated: 08/20/2021 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW167 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04467 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.04677 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.04898 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0955 |
| Power output listed is conducted. Single modular approval. This device supports IEEE 802.11n/ac modes in a 2x2 spatial multiplexing MIMO configuration as described in this filing. This device is granted for use in mobile RF exposure conditions only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains 2.4 GHz WLAN, BT and BLE transmitters. C2PC covering the replacement of an obsolete component. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application YExpax49+IKoMqXT/x7KIw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 08/22/2021 Application Dated: 08/20/2021 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW167 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04467 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.04677 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.04898 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0955 |
| Power output listed is conducted. Single modular approval. This device supports IEEE 802.11n/ac modes in a 2x2 spatial multiplexing MIMO configuration as described in this filing. This device is granted for use in mobile RF exposure conditions only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains 2.4 GHz WLAN, BT and BLE transmitters. C2PC covering the replacement of an obsolete component. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/08/2019 Application Dated: 07/07/2019 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW167 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01659 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.01071 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00589 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.05623 |
| Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device only has 20 MHz bandwidth mode. This device also contains 5G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application QwxL5QCn5Md5p+XuIOsyMQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 07/08/2019 Application Dated: 07/07/2019 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW167 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01659 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.01071 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00589 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.05623 |
| Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device only has 20 MHz bandwidth mode. This device also contains 5G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/08/2019 Application Dated: 07/07/2019 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW167 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04467 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.04677 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.04898 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0955 |
| Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains 2.4G WLAN, BT and BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application HtEWWqZpCt5Rt6eETKpuNg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 07/08/2019 Application Dated: 07/07/2019 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW167 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04467 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.04677 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.04898 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0955 |
| Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains 2.4G WLAN, BT and BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/22/2021 Application Dated: 08/20/2021 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW167 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01659 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.01071 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00589 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.05623 |
| Power output listed is conducted. Single modular approval. This device supports a IEEE 802.11n mode in a 2x2 spatial multiplexing MIMO configuration as described in this filing. This device is granted for use in mobile RF exposure conditions only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz maximum bandwidth mode. This device also contains a 5 GHz WLAN transmitter. C2PC covering the replacement of an obsolete component. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application AShAnQ+a+iIJrJbQksVHXA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 08/22/2021 Application Dated: 08/20/2021 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW167 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W1 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01659 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.01071 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00589 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.05623 |
| Power output listed is conducted. Single modular approval. This device supports a IEEE 802.11n mode in a 2x2 spatial multiplexing MIMO configuration as described in this filing. This device is granted for use in mobile RF exposure conditions only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz maximum bandwidth mode. This device also contains a 5 GHz WLAN transmitter. C2PC covering the replacement of an obsolete component. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |