FCC ID XPYJODYW374
JODY-W374-00A and JODY-W374-00B
by u-blox AG
Grantee Code: XPY Product Code: JODYW374
Latest application date: 2024-09-27
FCC ID Device Details
| FCC ID | XPYJODYW374 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XPY |
| Product Code | JODYW374 |
| Applicant Business | u-blox AG 🇨🇭 |
| Related Domains |  u-blox.com  bureauveritas.com |
| Equipment Class | JODY-W374-00A and JODY-W374-00B |
| Test Firm | 7layers GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-27 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-01-24 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2023-01-24 |
| 5745-5825 MHz | Original Equipment | 2022-12-02 |
| 2412-2462 MHz | Original Equipment | 2022-12-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| JODY-W3_SIM_UBX-19011209_C1-Public | Users Manual | 2024-09-27 | PDF 2.2 MB |
| JODY-W3_SIM_UBX-19011209_C2-Restricted_r3 | Users Manual | 2022-12-02 | PDF 1.8 MB |
| JODY-W354_W374 with shield and connected antennas | Internal Photos | 2023-01-24 | PDF 1.1 MB |
| Confidential_JODY-W3_Photos | Internal Photos | 2022-12-02 | PDF 417.3 KB |
| JODY_combi_Photos | External Photos | 2023-01-24 | PDF 384.3 KB |
| Confidential_JODY-W3_Photos | External Photos | 2022-12-02 | PDF 417.3 KB |
| JODY-W3_Identifier marking | ID Label/Location Info | 2023-01-24 | PDF 349 KB |
| JODY-W3_Identifier marking_r2 | ID Label/Location Info | 2022-12-02 | PDF 233.2 KB |
| JODY-W3 Block Diagrams | Block Diagram | 2023-01-24 | PDF 229.1 KB |
| JODY-W3 Block Diagram | Block Diagram | 2022-12-02 | PDF 222 KB |
| MDE_UBLOX_2030_FCC_Photo_Setups_DFS | Test Setup Photos | 2024-09-27 | PDF 302.2 KB |
| MDE_UBLOX_2030_FCC_Photo_Setups | Test Setup Photos | 2022-12-02 | PDF 2 MB |
| MDE_UBLOX_2030_FCC_05_rev02_SIGNED | Test Report | 2024-09-27 | PDF 1.8 MB |
| MDE_UBLOX_2030_FCC_04_SIGNED | Test Report | 2023-01-24 | PDF 2.6 MB |
| MDE_UBLOX_2220_FCC_01_SIGNED_1 | Test Report | 2023-01-24 | PDF 5.6 MB |
| MDE_UBLOX_2220_FCC_01_SIGNED_71 | Test Report | 2023-01-24 | PDF 2.1 MB |
| MDE_UBLOX_2220_FCC_02_SIGNED_1 | Test Report | 2023-01-24 | PDF 5.6 MB |
| MDE_UBLOX_2220_FCC_02_SIGNED_78 | Test Report | 2023-01-24 | PDF 3 MB |
| MDE_UBLOX_2220_FCC_03_SIGNED | Test Report | 2023-01-24 | PDF 2.7 MB |
| ENG_DS_1-1773975-4_PN-2195630-1_0519 | Test Report | 2022-12-02 | PDF 1.7 MB |
| ENG_DS_ANT-DS-001-0009_A | Test Report | 2022-12-02 | PDF 2.7 MB |
| ENG_DS_ANT-DS-001-0012_0821_0_A | Test Report | 2022-12-02 | PDF 3.2 MB |
| MDE_UBLOX_2030_FCC_01_rev01_SIGNED_1 | Test Report | 2022-12-02 | PDF 5.6 MB |
| MDE_UBLOX_2030_FCC_01_rev01_SIGNED_110 | Test Report | 2022-12-02 | PDF 5.5 MB |
| MDE_UBLOX_2030_FCC_01_rev01_SIGNED_163 | Test Report | 2022-12-02 | PDF 5.4 MB |
| MDE_UBLOX_2030_FCC_01_rev01_SIGNED_261 | Test Report | 2022-12-02 | PDF 1.4 MB |
| MDE_UBLOX_2030_FCC_02_rev02_SIGNED_1 | Test Report | 2022-12-02 | PDF 5.6 MB |
| MDE_UBLOX_2030_FCC_02_rev02_SIGNED_135 | Test Report | 2022-12-02 | PDF 5.6 MB |
| MDE_UBLOX_2030_FCC_02_rev02_SIGNED_207 | Test Report | 2022-12-02 | PDF 5.5 MB |
| MDE_UBLOX_2030_FCC_02_rev02_SIGNED_273 | Test Report | 2022-12-02 | PDF 5.4 MB |
| MDE_UBLOX_2030_FCC_02_rev02_SIGNED_298 | Test Report | 2022-12-02 | PDF 947.5 KB |
| MDE_UBLOX_2030_FCC_03_rev01_SIGNED | Test Report | 2022-12-02 | PDF 1.4 MB |
| XPYJODYW374 FCC Covered Equipment_r1 Metadata only | Attestation Statements | 2024-09-27 | PDF 143.3 KB |
| XPYJODYW374 FCC Covered Equipment_r2 | Attestation Statements | 2024-09-27 | PDF 144 KB |
| XPYJODYW374 U.S. Agent Designation | Attestation Statements | 2024-09-27 | PDF 66.1 KB |
| XPYJODYW374 U.S. Agent Designation | Attestation Statements | 2024-09-27 | PDF 63.5 KB |
| 8595A-JODYW374 XPYJODYW374 Confidentiality request_r2 | Cover Letter(s) | 2024-09-27 | PDF 82.1 KB |
| 8595A-JODYW374 XPYJODYW374 Mode Function Declaration | Cover Letter(s) | 2024-09-27 | PDF 109.3 KB |
| ACB-FORM-FCC-Modular-Letter_DFS-C2PC_JODYW374 | Cover Letter(s) | 2024-09-27 | PDF 226.8 KB |
| XPYJODYW374 Authorization letter FCC_r1 | Cover Letter(s) | 2024-09-27 | PDF 67.2 KB |
| u-blox_FCC_IC_signature_Authorization_Letter | Cover Letter(s) | 2024-09-27 | PDF 104.7 KB |
| Letter of Application of Class-II Permissive Change FCC JODY-W3_rev1 | Cover Letter(s) | 2023-01-24 | PDF 160.8 KB |
| XPYJODYW374_Auth_Letter-FCC_combi | Cover Letter(s) | 2023-01-24 | PDF 56.9 KB |
| XPYJODYW374_Confidentiality_Request-FCC_combi | Cover Letter(s) | 2023-01-24 | PDF 61.9 KB |
| ACB-FORM-FCC-Modular-Letter_W374 | Cover Letter(s) | 2022-12-02 | PDF 64.3 KB |
| XPYJODYW374_Auth_Letter-FCC | Cover Letter(s) | 2022-12-02 | PDF 47.6 KB |
| XPYJODYW374_Confidentiality_Request-FCC | Cover Letter(s) | 2022-12-02 | PDF 57.5 KB |
| MDE_UBLOX_2030_MPE_03 | RF Exposure Info | 2024-09-27 | PDF 110.4 KB |
| JODY-W354-20_W374-20_Schematics Metadata only | Schematics | PDF 355.5 KB | |
| JODY-W354_W374-00_SCH_REV05 Metadata only | Schematics | PDF 356 KB | |
| 8595A-JODYW374 XPYJODYW374 Operational Description with DFS Master Metadata only | Operational Description | PDF 234.4 KB | |
| Confidential_JODY-W3_AntennaReferenceDesign_AppNote_UBX-22022630 Metadata only | Operational Description | PDF 390.6 KB | |
| DataSheet_LTE FIlter_SAFQA2G45MB0G7F Metadata only | Operational Description | PDF 476.6 KB | |
| JODY-W3 Frequency Stability Results Metadata only | Operational Description | PDF 125 KB | |
| JODY-W3 Operational Description with -W354 and LTE variants Metadata only | Operational Description | PDF 246.8 KB | |
| JODY-W3 Operational Description_final Metadata only | Operational Description | PDF 282.2 KB | |
| JODY-W3_sw_sec_sw_config_desc_r2 Metadata only | Operational Description | PDF 144.2 KB | |
| JODY-W3_sw_sec_sw_config_desc_rev1 Metadata only | Operational Description | PDF 145 KB | |
| MDE_UBLOX_2030_AR_02-JODY-W3_Family_Rev02 Metadata only | Operational Description | PDF 549.1 KB | |
| Response to Inquiry to FCC Tracking Number 967804 Metadata only | Operational Description | PDF 701.7 KB | |
| Response to Inquiry to FCC _Tracking Number 339125 Metadata only | Operational Description | PDF 660.4 KB | |
| Test_report_reuse_JODY-W3 Metadata only | Operational Description | PDF 331.9 KB |
Application Information
| Application ID | cSHk2o0RbTqTRcA/DdXI/g== |
|---|---|
| Final Action Date | 2024-09-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019077858 |
| Model | JODYW374 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | JODY-W374-00A and JODY-W374-00B |
| Responsible Party | Giulio Comar, Certification Manager, giulio.comar@u-blox.com , +390402529400 |
| Agent | Melanie Melanie Melanie, 7layers GmbH, melanie.anastassiou@bureauveritas.com , 011492102749311 |
| Technical Contact | Melanie Anastassiou, 7layers GmbH, melanie.anastassiou@bureauveritas.com , 011492102749 |
| Non-Technical Contact | Melanie Anastassiou, 7layers GmbH, melanie.anastassiou@bureauveritas.com , 011492102749 |
| Test Firm | Bernhard Retka, 7layers GmbH, Bernhard.Retka@7layers.com  , 00492102749452 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Limited Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it also contains 2.4GHz WLAN/BT/BLE transmitters. Class II permissive change (C2PC) to allow operation in master mode. The use of this module is limited to hosts with external antenna(s). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| cSHk2o0RbTqTRcA/DdXI/g== | 2024-09-27 | Class II permissive change or modification of presently authorized equipment |
| WqM38tM1DAgI6Ymy1c3t6w== | 2023-01-24 | Class II permissive change or modification of presently authorized equipment |
| UNwC5zIM8szbh5r1YMV8BQ== | 2023-01-24 | Class II permissive change or modification of presently authorized equipment |
| muCQ1KVXfCYCgOylkNsnDg== | 2022-12-02 | Original Equipment |
| fmSgTMKslqvDDibTjvfVpg== | 2022-12-02 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application WqM38tM1DAgI6Ymy1c3t6w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 01/24/2023 Application Dated: 01/15/2023 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW374 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | JODY-W354-00A, JODY-W354-20A and JODY-W374-20A |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0132 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.1349 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 2.4GHz WLAN/BT/BLE features and has 20 MHz and 40 MHz bandwidth modes for WLAN; and it contains 5GHz WLAN transmitter. C2PC Application, to add 3 more Models based on Hardware Modifications, as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application WqM38tM1DAgI6Ymy1c3t6w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 01/24/2023 Application Dated: 01/15/2023 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW374 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | JODY-W354-00A, JODY-W354-20A and JODY-W374-20A |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0132 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.1349 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 2.4GHz WLAN/BT/BLE features and has 20 MHz and 40 MHz bandwidth modes for WLAN; and it contains 5GHz WLAN transmitter. C2PC Application, to add 3 more Models based on Hardware Modifications, as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 01/24/2023 Application Dated: 01/16/2023 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW374 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | JODY-W354-00A, JODY-W354-20A and JODY-W374- 20A |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0776 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1096 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1148 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. C2PC Application, to add 3 more Models based on Hardware Modifications, as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application UNwC5zIM8szbh5r1YMV8BQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 01/24/2023 Application Dated: 01/16/2023 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW374 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | JODY-W354-00A, JODY-W354-20A and JODY-W374- 20A |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0776 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1096 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1148 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. C2PC Application, to add 3 more Models based on Hardware Modifications, as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 12/02/2022 Application Dated: 12/01/2022 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW374 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | JODY-W374-00A and JODY-W374-00B |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0776 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1096 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1148 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application muCQ1KVXfCYCgOylkNsnDg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 12/02/2022 Application Dated: 12/01/2022 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW374 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | JODY-W374-00A and JODY-W374-00B |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0776 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1096 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1148 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 12/02/2022 Application Dated: 12/01/2022 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW374 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | JODY-W374-00A and JODY-W374-00B |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0132 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.1349 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 2.4GHz WLAN/BT/BLE figures and has 20 MHz and 40 MHz bandwidth modes for WLAN; and it contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application fmSgTMKslqvDDibTjvfVpg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 12/02/2022 Application Dated: 12/01/2022 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW374 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | JODY-W374-00A and JODY-W374-00B |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0132 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.1349 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 2.4GHz WLAN/BT/BLE figures and has 20 MHz and 40 MHz bandwidth modes for WLAN; and it contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 09/27/2024 Application Dated: 09/19/2024 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW374 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | JODY-W374-00A and JODY-W374-00B |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0776 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1096 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.1148 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Limited Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it also contains 2.4GHz WLAN/BT/BLE transmitters. Class II permissive change (C2PC) to allow operation in master mode. The use of this module is limited to hosts with external antenna(s). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application cSHk2o0RbTqTRcA/DdXI/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 09/27/2024 Application Dated: 09/19/2024 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW374 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | JODY-W374-00A and JODY-W374-00B |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0776 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1096 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.1148 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Limited Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it also contains 2.4GHz WLAN/BT/BLE transmitters. Class II permissive change (C2PC) to allow operation in master mode. The use of this module is limited to hosts with external antenna(s). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |