FCC ID XPYJODYW377
Host-based automotive module with Wi- Fi and Bluetooth
by u-blox AG
Grantee Code: XPY Product Code: JODYW377
Latest application date: 2026-02-02
FCC ID Device Details
| FCC ID | XPYJODYW377 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XPY |
| Product Code | JODYW377 |
| Applicant Business | u-blox AG 🇨🇭 |
| Related Domains |  u-blox.com |
| Equipment Class | Host-based automotive module with Wi- Fi and Bluetooth |
| Test Firm | TUV SUD Product Service GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2026-02-02 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2026-02-02 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-17 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2023-04-18 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-04-18 |
| 5745-5825 MHz | Original Equipment | 2022-12-26 |
| 2412-2462 MHz | Original Equipment | 2022-12-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| JODY-W3_SIM_UBX-19011209_C1-Public | Users Manual | 2024-09-17 | PDF 2.2 MB |
| M2-JODY-W3_Product Manual_rev1 | Users Manual | 2023-04-18 | PDF 971.9 KB |
| JODY-W3_SIM_UBX-19011209_C2-Restricted_r3 | Users Manual | 2022-12-26 | PDF 1.8 MB |
| M2-JODY-W377_Photos_rev1 | Internal Photos | 2023-04-18 | PDF 326.7 KB |
| Confidential_JODY-W3_Photos | Internal Photos | 2022-12-26 | PDF 417.3 KB |
| JODY-W377 without shield and connected antennas | Internal Photos | 2022-12-26 | PDF 1.4 MB |
| JODY-W3_Photos | Internal Photos | 2022-12-26 | PDF 417.3 KB |
| Confidential_JODY-W3_Photos | External Photos | 2022-12-26 | PDF 417.3 KB |
| JODY-W3_Photos | External Photos | 2022-12-26 | PDF 417.3 KB |
| JODY-W3_Identifier marking | ID Label/Location Info | 2023-04-18 | PDF 270.5 KB |
| JODY-W3_Identifier marking_r2 | ID Label/Location Info | 2022-12-26 | PDF 233.2 KB |
| Confidential_JODY-W3 Block Diagram | Block Diagram | 2022-12-26 | PDF 222 KB |
| JODY-W3 Block Diagram | Block Diagram | 2022-12-26 | PDF 222 KB |
| Test Setup Photos | Test Setup Photos | 2026-07-29 | PDF 2.5 MB |
| MDE_UBLOX_2030_FCC_Photo_Setups_DFS | Test Setup Photos | 2024-09-17 | PDF 302.2 KB |
| MDE_UBLOX_2030_FCC_Photo_Setups | Test Setup Photos | 2022-12-26 | PDF 1.8 MB |
| Antenna Information Metadata only | Test Report | 2026-02-02 | PDF 1.2 MB |
| Test Report 1 Metadata only | Test Report | 2026-02-02 | PDF 3.4 MB |
| Test Report 2 Metadata only | Test Report | 2026-02-02 | PDF 159.6 KB |
| Test Report Part 1 | Test Report | 2026-02-02 | PDF 3.8 MB |
| Test Report Part 2 | Test Report | 2026-02-02 | PDF 2.4 MB |
| Test Report part 2 | Test Report | 2026-02-02 | PDF 2.4 MB |
| MDE_UBLOX_2030_FCC_05_rev02_SIGNED | Test Report | 2024-09-17 | PDF 1.8 MB |
| MDE_UBLOX_2221_FCC_01_SIGNED_1 | Test Report | 2023-04-18 | PDF 5.5 MB |
| MDE_UBLOX_2221_FCC_01_SIGNED_68 | Test Report | 2023-04-18 | PDF 3.8 MB |
| MDE_UBLOX_2221_FCC_02_SIGNED_1 | Test Report | 2023-04-18 | PDF 5.4 MB |
| MDE_UBLOX_2221_FCC_02_SIGNED_112 | Test Report | 2023-04-18 | PDF 5.5 MB |
| MDE_UBLOX_2221_FCC_02_SIGNED_145 | Test Report | 2023-04-18 | PDF 1.9 MB |
| MDE_UBLOX_2221_FCC_02_SIGNED_79 | Test Report | 2023-04-18 | PDF 5.5 MB |
| ENG_DS_1-1773975-4_PN-2195630-1_0519 | Test Report | 2022-12-26 | PDF 1.7 MB |
| ENG_DS_ANT-DS-001-0009_A | Test Report | 2022-12-26 | PDF 2.7 MB |
| ENG_DS_ANT-DS-001-0012_0821_0_A | Test Report | 2022-12-26 | PDF 3.2 MB |
| MDE_UBLOX_2030_FCC_01_rev01_SIGNED_1 | Test Report | 2022-12-26 | PDF 5.6 MB |
| MDE_UBLOX_2030_FCC_01_rev01_SIGNED_110 | Test Report | 2022-12-26 | PDF 5.5 MB |
| MDE_UBLOX_2030_FCC_01_rev01_SIGNED_163 | Test Report | 2022-12-26 | PDF 5.4 MB |
| MDE_UBLOX_2030_FCC_01_rev01_SIGNED_261 | Test Report | 2022-12-26 | PDF 1.4 MB |
| MDE_UBLOX_2030_FCC_02_rev02_SIGNED_1 | Test Report | 2022-12-26 | PDF 5.6 MB |
| MDE_UBLOX_2030_FCC_02_rev02_SIGNED_135 | Test Report | 2022-12-26 | PDF 5.6 MB |
| MDE_UBLOX_2030_FCC_02_rev02_SIGNED_207 | Test Report | 2022-12-26 | PDF 5.5 MB |
| MDE_UBLOX_2030_FCC_02_rev02_SIGNED_273 | Test Report | 2022-12-26 | PDF 5.4 MB |
| MDE_UBLOX_2030_FCC_02_rev02_SIGNED_298 | Test Report | 2022-12-26 | PDF 947.5 KB |
| MDE_UBLOX_2030_FCC_03_rev01_SIGNED | Test Report | 2022-12-26 | PDF 1.4 MB |
| Attestation Statements US agent for service of process | Attestation Statements | 2026-02-02 | PDF 291.2 KB |
| Attestation of Covered Equipment | Attestation Statements | 2026-02-02 | PDF 66.2 KB |
| 8595A-JODYW377 XPYJODYW377 Mode Function Declaration | Attestation Statements | 2024-09-17 | PDF 107.2 KB |
| XPYJODYW377 FCC Covered Equipment_r1 | Attestation Statements | 2024-09-17 | PDF 143.3 KB |
| XPYJODYW377 FCC Covered Equipment_r2 | Attestation Statements | 2024-09-17 | PDF 144 KB |
| XPYJODYW377 U.S. Agent Designation | Attestation Statements | 2024-09-17 | PDF 63.5 KB |
| XPYJODYW377 U.S. Agent Designation | Attestation Statements | 2024-09-17 | PDF 66 KB |
| ublox U.S. Agent Designation | Attestation Statements | 2023-04-18 | PDF 66.2 KB |
| ubloxAttestationStatementspart2911_d_5_i_d_5_iifiling | Attestation Statements | 2023-04-18 | PDF 102 KB |
| C2PC Letter | Cover Letter(s) | 2026-02-02 | PDF 68.8 KB |
| Confidentiality Letter | Cover Letter(s) | 2026-02-02 | PDF 84.6 KB |
| 8595A-JODYW377 XPYJODYW377 Confidentiality request_r1 | Cover Letter(s) | 2024-09-17 | PDF 81.8 KB |
| ACB-FORM-FCC-Modular-Letter_DFS-C2PC_rev1 | Cover Letter(s) | 2024-09-17 | PDF 111 KB |
| XPYJODYW377 Authorization letter FCC_r1 | Cover Letter(s) | 2024-09-17 | PDF 66.9 KB |
| u-blox_FCC_IC_signature_Authorization_Letter | Cover Letter(s) | 2024-09-17 | PDF 104.7 KB |
| Letter of Application of Class-II Permissive Change FCC M2-JODY-W377_rev3 | Cover Letter(s) | 2023-04-18 | PDF 121.4 KB |
| M2-JODY-W377_Auth_Letter-FCC_rev1 | Cover Letter(s) | 2023-04-18 | PDF 60.7 KB |
| M2-JODY-W377_Confidentiality_Request-FCC_rev1 | Cover Letter(s) | 2023-04-18 | PDF 122.2 KB |
| ACB-FORM-FCC-Modular-Letter_W377 | Cover Letter(s) | 2022-12-26 | PDF 64.3 KB |
| Confidential_ACB-FORM-FCC-Modular-Letter_W377 | Cover Letter(s) | 2022-12-26 | PDF 64.3 KB |
| Confidential_XPYJODYW377_Auth_Letter-FCC | Cover Letter(s) | 2022-12-26 | PDF 47.6 KB |
| Confidential_XPYJODYW377_Confidentiality_Request-FCC | Cover Letter(s) | 2022-12-26 | PDF 57.5 KB |
| XPYJODYW377_Auth_Letter-FCC | Cover Letter(s) | 2022-12-26 | PDF 47.6 KB |
| XPYJODYW377_Confidentiality_Request-FCC | Cover Letter(s) | 2022-12-26 | PDF 57.5 KB |
| RF Exposure Report | RF Exposure Info | 2026-02-02 | PDF 770.9 KB |
| MDE_UBLOX_2030_MPE_03 | RF Exposure Info | 2024-09-17 | PDF 110.4 KB |
| M2-JODY-W377_BlockDiagram_rev1 Metadata only | Block Diagram | PDF 36.2 KB | |
| Confidential_JODY-W377-00_SCH_REV05 Metadata only | Schematics | PDF 355.8 KB | |
| M2_Key_E_JODY_W377_HW3.SCH_rev1 Metadata only | Schematics | PDF 158.4 KB | |
| 8595A-JODYW377 XPYJODYW377 Operational Description with DFS Master Metadata only | Operational Description | PDF 232.2 KB | |
| Confidential_JODY-W3_AntennaReferenceDesign_AppNote_UBX-22022630 Metadata only | Operational Description | PDF 390.6 KB | |
| JODY-W3 Frequency Stability Results Metadata only | Operational Description | PDF 125 KB | |
| JODY-W3 Operational Description_final Metadata only | Operational Description | PDF 282.2 KB | |
| JODY-W3_sw_sec_sw_config_desc_r2 Metadata only | Operational Description | PDF 144.2 KB | |
| M2-JODY-W3 Operational Description_rev1 Metadata only | Operational Description | PDF 226.2 KB | |
| Response to Inquiry to FCC Tracking Number 967804 Metadata only | Operational Description | PDF 701.7 KB | |
| Test_report_reuse_JODY-W3 Metadata only | Operational Description | PDF 331.9 KB |
Application Information
| Application ID | QTMyeeRCdRuzV70y2fESlA== |
|---|---|
| Final Action Date | 2026-02-02 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019077858 |
| Model | JODYW377 |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Host-based automotive module with Wi- Fi and Bluetooth |
| Responsible Party | Filip Kruzela, filip.kruzela@u-blox.com , +46733207170 |
| Test Firm | Hannes Adelsberger, TUV SUD Product Service GmbH, hannes.adelsberger@tuvsud.com  , +49 9421 5682-152 |
| TCB Email | andy.zhang@tuvsud.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| QTMyeeRCdRuzV70y2fESlA== | 2026-02-02 | Class II permissive change or modification of presently authorized equipment |
| AAoEatGEMq3WgEY+6IyKFw== | 2026-02-02 | Class II permissive change or modification of presently authorized equipment |
| 1Rn0WVLGjq1fWXuxNroqKQ== | 2024-09-17 | Class II permissive change or modification of presently authorized equipment |
| pmXqqf6uSzzyl7WZ9Bil7Q== | 2023-04-18 | Class II permissive change or modification of presently authorized equipment |
| +GK/Gfu8HVsY9GtvuJQ37g== | 2023-04-18 | Class II permissive change or modification of presently authorized equipment |
| sUMWTOiTunJzhOo64ucXmw== | 2022-12-26 | Original Equipment |
| LSTWY6qxlKlH2lKQnkGrtg== | 2022-12-26 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application sUMWTOiTunJzhOo64ucXmw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 12/26/2022 Application Dated: 12/25/2022 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW377 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | JODY-W377-00A and JODY-W377-00B |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0676 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1175 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1175 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application sUMWTOiTunJzhOo64ucXmw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 12/26/2022 Application Dated: 12/25/2022 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW377 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | JODY-W377-00A and JODY-W377-00B |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0676 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1175 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1175 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 02/02/2026 Application Dated: 02/02/2026 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW377 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Host-based automotive module with Wi- Fi and Bluetooth |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0676 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1175 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1175 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN transmitters. Class II permissive change (C2PC) as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application pmXqqf6uSzzyl7WZ9Bil7Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 04/18/2023 Application Dated: 04/13/2023 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW377 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W2 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0676 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1175 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1175 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. Class II Permissive Change Application to include the device on a board with a M.2 Key E interface, as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application pmXqqf6uSzzyl7WZ9Bil7Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 04/18/2023 Application Dated: 04/13/2023 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW377 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W2 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0676 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1175 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1175 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. Class II Permissive Change Application to include the device on a board with a M.2 Key E interface, as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 12/26/2022 Application Dated: 12/24/2022 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW377 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | JODY-W377-00A and JODY-W377-00B |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0132 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.1349 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 2.4GHz WLAN/BT/BLE features and has 20 MHz and 40 MHz bandwidth modes for WLAN feature; and it contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application LSTWY6qxlKlH2lKQnkGrtg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 12/26/2022 Application Dated: 12/24/2022 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW377 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | JODY-W377-00A and JODY-W377-00B |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0132 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.1349 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 2.4GHz WLAN/BT/BLE features and has 20 MHz and 40 MHz bandwidth modes for WLAN feature; and it contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 02/02/2026 Application Dated: 02/02/2026 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Filip Kruzela , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW377 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Host-based automotive module with Wi- Fi and Bluetooth |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.1349 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 2.4GHz WLAN features and has 20 MHz and 40 MHz bandwidth modes for WLAN feature; and it contains 5GHz WLAN transmitter. Class II permissive change (C2PC) as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application 1Rn0WVLGjq1fWXuxNroqKQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 09/17/2024 Application Dated: 09/13/2024 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW377 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | JODY-W377-00A and JODY-W377-00B |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0676 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1175 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.1175 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Limited Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. Class II permissive change (C2PC) to allow operation in master mode. The use of this module is limited to hosts with external antenna(s). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 1Rn0WVLGjq1fWXuxNroqKQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 09/17/2024 Application Dated: 09/13/2024 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW377 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | JODY-W377-00A and JODY-W377-00B |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0676 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1175 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.1175 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Limited Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. Class II permissive change (C2PC) to allow operation in master mode. The use of this module is limited to hosts with external antenna(s). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||
|
| Office of Engineering and Technology | |
| FCC > FCC E-filing > OET Application Error Page | FCC Site Map |
You have incorrectly accessed this page. Please return to the previous page using your browser's "back" button or navigate back to the homepage.
Please report this error to FCC OET Systems Support
|
|
|
Federal Communications Commission 45 L Street NE Washington, DC 20554 More FCC Contact Information... |
|
|
EAS Grant - Application +GK/Gfu8HVsY9GtvuJQ37g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 04/18/2023 Application Dated: 04/13/2023 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYJODYW377 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module JODY-W2 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0132 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.1349 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 2.4GHz WLAN/BT/BLE features and has 20 MHz and 40 MHz bandwidth modes for WLAN feature; and it contains 5GHz WLAN transmitter. Class II Permissive Change Application to include the device on a board with a M.2 Key E interface, as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |