FCC ID XPYLILYW1
Wireless Communication System Module
by u-blox AG
Grantee Code: XPY Product Code: LILYW1
Latest application date: 2021-09-21
Device Images
FCC ID Device Details
| FCC ID | XPYLILYW1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XPY |
| Product Code | LILYW1 |
| Applicant Business | u-blox AG 🇨🇭 |
| Related Domains |  u-blox.com |
| Equipment Class | Wireless Communication System Module |
| Test Firm | PHOENIX TESTLAB GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2021-09-21 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2021-07-22 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2020-03-18 |
| 2412-2462 MHz | Original Equipment | 2016-07-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2016-07-13 | PDF 1.8 MB |
| Internal Photos | Internal Photos | 2021-09-21 | PDF 115.9 KB |
| Internal Photos | Internal Photos | 2021-07-22 | PDF 63.7 KB |
| int photos | Internal Photos | 2020-03-18 | PDF 469 KB |
| Int Photos | Internal Photos | 2016-07-13 | PDF 610.8 KB |
| External Photos | External Photos | 2021-09-21 | PDF 635.8 KB |
| External Photos | External Photos | 2021-07-22 | PDF 63.7 KB |
| Ext Photos | External Photos | 2020-03-18 | PDF 738 KB |
| ext photos | External Photos | 2016-07-13 | PDF 3 MB |
| ID Lable Location Info | ID Label/Location Info | 2021-09-21 | PDF 227.2 KB |
| Label location | ID Label/Location Info | 2016-07-13 | PDF 205.3 KB |
| Block Diagram | Block Diagram | 2021-09-21 | PDF 190.2 KB |
| Block Diagram | Block Diagram | 2016-07-13 | PDF 76.6 KB |
| Test Setup Photos | Test Setup Photos | 2021-09-21 | PDF 1.1 MB |
| Test Setup Photos | Test Setup Photos | 2021-07-22 | PDF 634.9 KB |
| Test Setup photos | Test Setup Photos | 2020-03-18 | PDF 710.7 KB |
| test setup photos | Test Setup Photos | 2016-07-13 | PDF 1.1 MB |
| Test Report | Test Report | 2021-09-21 | PDF 723 KB |
| M2105018-13 RDO FCC15.247_RSS247 WIFI | Test Report | 2021-07-22 | PDF 876.5 KB |
| Annex to test report | Test Report | 2020-03-18 | PDF 243.8 KB |
| Test Report | Test Report | 2020-03-18 | PDF 417.2 KB |
| test report | Test Report | 2016-07-13 | PDF 632.9 KB |
| Agency Letter | Cover Letter(s) | 2021-09-21 | PDF 111.5 KB |
| Class II Change Request | Cover Letter(s) | 2021-09-21 | PDF 64.1 KB |
| LTC Request Letter | Cover Letter(s) | 2021-09-21 | PDF 54.4 KB |
| C2PC Cover Letter | Cover Letter(s) | 2021-07-22 | PDF 38.5 KB |
| C2PC Letter | Cover Letter(s) | 2021-07-22 | PDF 43.5 KB |
| POA | Cover Letter(s) | 2021-07-22 | PDF 43.9 KB |
| Signature Authorization Letter | Cover Letter(s) | 2021-07-22 | PDF 104.7 KB |
| C22 Change letter | Cover Letter(s) | 2020-03-18 | PDF 328.2 KB |
| LTC Request | Cover Letter(s) | 2020-03-18 | PDF 493 KB |
| PoA | Cover Letter(s) | 2020-03-18 | PDF 44.4 KB |
| Ad hoc mode letter | Cover Letter(s) | 2016-07-13 | PDF 306.7 KB |
| Antenna Connector | Cover Letter(s) | 2016-07-13 | PDF 358.2 KB |
| Identity Declaration | Cover Letter(s) | 2016-07-13 | PDF 205.3 KB |
| LTC request | Cover Letter(s) | 2016-07-13 | PDF 442 KB |
| MA letter | Cover Letter(s) | 2016-07-13 | PDF 988.4 KB |
| PoA | Cover Letter(s) | 2016-07-13 | PDF 331.1 KB |
| RF exposure | RF Exposure Info | 2016-07-13 | PDF 20.4 KB |
| Schematics Metadata only | Schematics | PDF 29.1 KB | |
| schematics Metadata only | Schematics | PDF 29.1 KB | |
| operational description Metadata only | Operational Description | PDF 1.5 MB | |
| operational description Metadata only | Operational Description | PDF 200.7 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 207.9 KB | |
| Parts List W131 Metadata only | Parts List/Tune Up Info | PDF 46.7 KB | |
| Parts List W132 Metadata only | Parts List/Tune Up Info | PDF 48.6 KB |
Application Information
| Application ID | pjaU/b/WWmKM1UqkP6Q5rQ== |
|---|---|
| Final Action Date | 2021-09-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019077858 |
| Model | LILYW1 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless Communication System Module |
| Responsible Party | Giulio Comar, Certification Manager, giulio.comar@u-blox.com , +390402529400 |
| Agent | Filip Filip Filip, u-blox AG, filip.kruzela@u-blox.com , +46406307170 |
| Test Firm | Holger Bentje, PHOENIX TESTLAB GmbH, office@phoenix-testlab.de  , 49-5235-9500-24 |
| TCB Email | brandhorst.dirk@phoenix-testlab.de |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile or fixed transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna (s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter policy. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The variant LILY-W131 (Limited Single Modular Approval) described in this filing can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change adds new model variant (LILY-W133) with onboard antenna. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pjaU/b/WWmKM1UqkP6Q5rQ== | 2021-09-21 | Class II permissive change or modification of presently authorized equipment |
| CAypWeZyspN6KKxI5KX9mw== | 2021-07-22 | Class II permissive change or modification of presently authorized equipment |
| vw6pXmP7BJRL+/+ksZYdMA== | 2020-03-18 | Class II permissive change or modification of presently authorized equipment |
| iDLXqI61BKmKiupupbT55A== | 2016-07-13 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.1410000 | 15C |
Grants
TCB Grant - Application vw6pXmP7BJRL+/+ksZYdMA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 03/18/2020 Application Dated: 03/18/2020 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYLILYW1 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.141 |
| Class II Permissive Change: Limited Modular Approval that covers a unique antenna trace design of the transmitter module version LILY-W131 together with the external antenna only inside the documented dedicated host device (Wifi to J1939 CAN bus vehicle interface) manufactured by Horner APG. |
EAS Grant - Application vw6pXmP7BJRL+/+ksZYdMA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 03/18/2020 Application Dated: 03/18/2020 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYLILYW1 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.141 |
| Class II Permissive Change: Limited Modular Approval that covers a unique antenna trace design of the transmitter module version LILY-W131 together with the external antenna only inside the documented dedicated host device (Wifi to J1939 CAN bus vehicle interface) manufactured by Horner APG. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 09/21/2021 Application Dated: 09/21/2021 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYLILYW1 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.141 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile or fixed transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna (s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter policy. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The variant LILY-W131 (Limited Single Modular Approval) described in this filing can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change adds new model variant (LILY-W133) with onboard antenna. |
EAS Grant - Application pjaU/b/WWmKM1UqkP6Q5rQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 09/21/2021 Application Dated: 09/21/2021 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYLILYW1 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.141 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile or fixed transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna (s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter policy. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The variant LILY-W131 (Limited Single Modular Approval) described in this filing can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change adds new model variant (LILY-W133) with onboard antenna. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 07/13/2016 Application Dated: 07/13/2016 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYLILYW1 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.141 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile or fixed transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna (s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter policy. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The variant LILY-W131 described in this filing can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
EAS Grant - Application iDLXqI61BKmKiupupbT55A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 07/13/2016 Application Dated: 07/13/2016 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYLILYW1 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.141 |
| Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile or fixed transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna (s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter policy. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The variant LILY-W131 described in this filing can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/22/2021 Application Dated: 07/22/2021 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYLILYW1 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communications System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.141 |
| Limited Single Modular Approval. Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile or fixed transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna (s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter policy. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The variant LILY-W131 described in this filing can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change to integrate the module into host device (Fleet Space Technologies’ Fleet Portal) |
EAS Grant - Application CAypWeZyspN6KKxI5KX9mw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 07/22/2021 Application Dated: 07/22/2021 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYLILYW1 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communications System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.141 |
| Limited Single Modular Approval. Output Power listed is peak conducted. This OEM module is approved for use in products operating as mobile or fixed transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna (s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter policy. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The variant LILY-W131 described in this filing can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change to integrate the module into host device (Fleet Space Technologies’ Fleet Portal) |
| Mail To: |