FCC ID XPYLISAU200

XPY-LISAU200, XPY LISAU200, XPYLISAU200, XPYLISAU2OO, XPYL1SAU200

u-blox AG LISAU200 for the 3M DV GPS Proximity Notification Unit

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: XPYLISAU200 is . The remaining characters of the FCC ID, LISAU200, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

u-blox AG

Full Company Details: u-blox AG - XPY
Company Code: XPY
Address:
   u-blox AG
   Zuercherstrasse 68
   Thalwil, N/A Ch-8800
   Switzerland
App # Purpose Date Unique ID
1 Class II Permissive Change 2017-12-11 bi4UQv8CYAbtNRV38+WNPA==
2 Class II Permissive Change 2017-04-17 C7SQ1onPU9YL7j61A+rOhg==
3 Class II Permissive Change 2012-11-21 EeyU61K0qpGj3klPcTlXSA==
4 Class II Permissive Change 2013-02-05 hyRPS2xIVjw+wOc5LFl0fg==
5 Class II Permissive Change 2013-12-12 k8gll/zgPOxjlSIXfOVmCw==
6 Original Equipment 2012-02-03 mka/QOeS4d7b4gwntenUHQ==
7 Class II Permissive Change 2013-02-05 oXcVzLI8MewOWyvW3Z8oCQ==
8 Class II Permissive Change 2016-04-25 qmODKRIZwX8Wy6aCLAwgxA==
9 Class II Permissive Change 2016-11-07 QuZ2HTCfd/dNRyacAGd4Zg==
10 Class II Permissive Change 2019-09-09 sySr6b7NXCHIzq/8sTU9Xg==
11 Original Equipment 2012-02-03 Vgqlznbr7fPhwg1DZYOVSA==

Approved Operating Frequencies

App # Frequency RangePower OutputToleranceEmission DesignatorRule PartsGrant Notes
1.1824.2-848.81.8490.021ppm300KGXW22H
1.2824.2-848.80.5370.026ppm300KGXW22H
1.3826.4-846.60.2060.013ppm4M56F9W22H
1.41850.2-1909.81.0640.013ppm300KGXW24E
1.51850.2-1909.80.4440.018ppm300KGXW24E
1.61852.4-1907.60.2360.028ppm4M56F9W24E
1.71712.4-1742.50.3710.012ppm4M64F9W27
2.1824.2-848.81.8490.021ppm300KGXW22H
2.2824.2-848.80.5370.026ppm300KGXW22H
2.3826.4-846.60.2060.013ppm4M56F9W22H
2.41850.2-1909.81.0640.013ppm300KGXW24E
2.51850.2-1909.80.4440.018ppm300KGXW24E
2.61852.4-1907.60.2360.028ppm4M56F9W24E
2.71712.4-1742.50.3710.012ppm4M64F9W27
3.1824.2-848.81.8490.021ppm300KGXW22H
3.2824.2-848.80.5370.026ppm300KGXW22H
3.3826.4-846.60.2060.013ppm4M56F9W22H
3.41850.2-1909.81.0640.013ppm300KGXW24E
3.51850.2-1909.80.4440.018ppm300KGXW24E
3.61852.4-1907.60.2360.028ppm4M56F9W24E
4.1-15B
5.1824.2-848.81.8490.021ppm300KGXW22H
5.2824.2-848.80.5370.026ppm300KG7W22H
5.3826.4-846.60.2060.013ppm4M56F9W22H
5.41850.2-1909.81.0640.013ppm300KGXW24E
5.51850.2-1909.80.4440.018ppm300KG7W24E
5.61852.4-1907.60.2360.028ppm4M56F9W24E
5.71712.4-1752.50.3710.012ppm4M64F9W27
6.1824.2-848.81.8490.021ppm300KGXW22H
6.2824.2-848.80.5370.026ppm300KG7W22H
6.3826.4-846.60.2060.013ppm4M56F9W22H
6.41850.2-1909.81.0640.013ppm300KGXW24E
6.51850.2-1909.80.4440.018ppm300KG7W24E
6.61852.4-1907.60.2360.028ppm4M56F9W24E
7.1824.2-848.81.8490.021ppm300KGXW22H
7.2824.2-848.80.5370.026ppm300KGXW22H
7.3826.4-846.60.2060.013ppm4M56F9W22H
7.41850.2-1909.81.0640.013ppm300KGXW24E
7.51850.2-1909.80.4440.018ppm300KGXW24E
7.61852.4-1907.60.2360.028ppm4M56F9W24E
7.71712.4-1752.50.3710.012ppm4M64F9W27
8.1824.2-848.81.8492.1ppm300GXW22H
8.2824.2-848.80.5372.6ppm300G7W22H
8.3826.4-846.60.2061.3ppm4M56F9W22H
8.41850.2-1909.81.0641.3ppm300GXW24E
8.51850.2-1909.80.4441.8ppm300G7W24E
8.61852.4-1907.60.2362.3ppm4M56F9W24E
8.71712.4-1752.50.3711.2ppm4M64F9W27
9.1824.2-848.81.8490.021ppm300KGXW22H
9.2824.2-848.80.5370.026ppm300KGXW22H
9.3826.4-846.60.2060.013ppm4M56F9W22H
9.41850.2-1909.81.0640.013ppm300KGXW24E
9.51850.2-1909.80.4440.018ppm300KGXW24E
9.61852.4-1907.60.2360.028ppm4M56F9W24E
9.71712.4-1752.50.3710.012ppm4M64F9W27
10.1824.2-848.81.8490.021ppm300KGXW22HBC
10.2824.2-848.80.5370.026ppm300KG7W22HBC
10.3826.4-846.60.2060.013ppm4M56F9W22HBC
10.41850.2-1909.81.0640.013ppm300KGXW24EBC
10.51850.2-1909.80.4440.018ppm300KG7W24EBC
10.61852.4-1907.60.2360.028ppm4M56F9W24EBC
10.71712.4-1752.60.3710.012ppm4M64F9W27BC
11.1-15B

Exhibits

All Available Documents

App # Document Type Submitted / Available
1 SAR Test report - Part 2Test Report / Adobe Acrobat PDF (5950 kB) 2017-12-05 / 2017-12-11
1 C2PC letterCover Letter(s) / Adobe Acrobat PDF (178 kB) 2017-12-05 / 2017-12-11
1 SAR Test report - Part 3Test Report / Adobe Acrobat PDF (596 kB) 2017-12-05 / 2017-12-11
1 Similarity declarationCover Letter(s) / Adobe Acrobat PDF (4858 kB) 2017-12-05 / 2017-12-11
1 Host user guideUsers Manual / Adobe Acrobat PDF (1378 kB) 2017-12-11 / 2017-12-11
1 Agent letterCover Letter(s) / Adobe Acrobat PDF (561 kB) 2017-12-05 / 2017-12-11
1 Host Label design and locationID Label/Location Info / Adobe Acrobat PDF (167 kB) 2017-12-05 / 2017-12-11
1 SAR Test report - Part 1Test Report / Adobe Acrobat PDF (1829 kB) 2017-12-05 / 2017-12-11
2 Host labelID Label/Location Info / JPEG Image (53 kB) 2017-04-17 / 2017-04-17
2 Host user guideUsers Manual / Adobe Acrobat PDF (1459 kB) 2017-04-17 / 2017-04-17
2 Agent letterCover Letter(s) / Adobe Acrobat PDF (3645 kB) 2017-04-17 / 2017-04-17
2 C2PC request letterCover Letter(s) / Adobe Acrobat PDF (399 kB) 2017-04-17 / 2017-04-17
2 SAR test reportTest Report / Adobe Acrobat PDF (4660 kB) 2017-04-17 / 2017-04-17
2 Agent letterCover Letter(s) / Adobe Acrobat PDF (3645 kB) 2017-04-17 / 2017-04-17
3 Request_for_Confidentiality.pdfCover Letter(s) / Adobe Acrobat PDF (330 kB) 2012-11-21 / 2012-11-21
3 TestReportAnnex3.pdfTest Report / Adobe Acrobat PDF (481 kB) 2012-11-21 / 2012-11-21
3 RF Exposure_TR6-0143-12-11-2c.pdfRF Exposure Info / Adobe Acrobat PDF (1184 kB) 2012-11-21 / 2012-11-21
3 Test Report.pdfTest Report / Adobe Acrobat PDF (1611 kB) 2012-11-21 / 2012-11-21
3 Test Setup photos.pdfTest Setup Photos / Adobe Acrobat PDF (706 kB) 2012-11-21 / 2012-11-21
3 Class2_Permissive_Change_Cover Letter.pdfCover Letter(s) / Adobe Acrobat PDF (167 kB) 2012-11-21 / 2012-11-21
3 TestReportAnnex1.pdfTest Report / Adobe Acrobat PDF (2018 kB) 2012-11-21 / 2012-11-21
3 Internal photo.pdfInternal Photos / Adobe Acrobat PDF (57 kB) 2012-11-21 / 2013-05-20
3 TestReportAnnex2.pdfTest Report / Adobe Acrobat PDF (585 kB) 2012-11-21 / 2012-11-21
4 06_MPE report.pdfRF Exposure Info / Adobe Acrobat PDF (255 kB) 2013-02-05 / 2013-02-05
4 TestReport.pdfTest Report / Adobe Acrobat PDF (440 kB) 2013-02-05 / 2013-02-05
4 01_Class2_Permissive_Change-R2_0.pdfCover Letter(s) / Adobe Acrobat PDF (173 kB) 2013-02-05 / 2013-02-05
5 Test setup photosTest Setup Photos / Adobe Acrobat PDF (691 kB) 2013-12-12 / 2013-12-12
5 Test reportTest Report / Adobe Acrobat PDF (1695 kB) 2013-12-12 / 2013-12-12
5 Test report - plotsTest Report / Adobe Acrobat PDF (1642 kB) 2013-12-12 / 2013-12-12
5 Label and Label locationID Label/Location Info / Adobe Acrobat PDF (166 kB) 2013-12-12 / 2013-12-12
5 Cover Letter- Class2_Permissive_ChangeCover Letter(s) / Adobe Acrobat PDF (115 kB) 2013-12-12 / 2013-12-12
5 Request_for_ConfidentialityCover Letter(s) / Adobe Acrobat PDF (146 kB) 2013-12-12 / 2013-12-12
6 03 external photos test report GSMExternal Photos / Adobe Acrobat PDF (569 kB) 2012-02-03 / 2012-08-01
6 07 test setup photos GSMTest Setup Photos / Adobe Acrobat PDF (490 kB) 2012-05-25 / 2012-08-01
6 06 Test report GSMTest Report / Adobe Acrobat PDF (1436 kB) 2012-02-03 / 2012-02-03
6 09 internal photosInternal Photos / Adobe Acrobat PDF (193 kB) 2012-02-03 / 2012-08-01
6 03 external photos test report WCDMAExternal Photos / Adobe Acrobat PDF (569 kB) 2012-02-03 / 2012-08-01
6 07 test setup photos UMTSTest Setup Photos / Adobe Acrobat PDF (504 kB) 2012-05-25 / 2012-08-01
6 06 WCDMA test reportTest Report / Adobe Acrobat PDF (1572 kB) 2012-02-03 / 2012-02-03
6 01 Label and placementID Label/Location Info / Adobe Acrobat PDF (190 kB) 2012-02-03 / 2012-02-03
6 06 Test report GSMTest Report / Adobe Acrobat PDF (1436 kB) 2012-02-03 / 2012-02-03
6 08 revised integrators manualUsers Manual / Adobe Acrobat PDF (2187 kB) 2012-05-25 / 2012-08-01
6 06 WCDMA test report diagramsTest Report / Adobe Acrobat PDF (1450 kB) 2012-02-03 / 2012-02-03
6 02 request for confidentiality and STCCover Letter(s) / Adobe Acrobat PDF (580 kB) 2012-02-03 / 2012-02-03
6 06 WCDMA test reportTest Report / Adobe Acrobat PDF (1572 kB) 2012-02-03 / 2012-02-03
6 11 revised MPE reportRF Exposure Info / Adobe Acrobat PDF (72 kB) 2012-05-25 / 2012-02-03
6 01 Label and placementID Label/Location Info / Adobe Acrobat PDF (190 kB) 2012-02-03 / 2012-02-03
6 06 GSM test report diagramsTest Report / Adobe Acrobat PDF (2253 kB) 2012-02-03 / 2012-02-03
6 03 external photos test report GSMExternal Photos / Adobe Acrobat PDF (569 kB) 2012-02-03 / 2012-08-01
6 06 WCDMA test report diagramsTest Report / Adobe Acrobat PDF (1450 kB) 2012-02-03 / 2012-02-03
6 13 supercede requestCover Letter(s) / Adobe Acrobat PDF (143 kB) 2012-05-25 / 2012-02-03
6 02 request for confidentiality and STCCover Letter(s) / Adobe Acrobat PDF (580 kB) 2012-02-03 / 2012-02-03
6 09 internal photosInternal Photos / Adobe Acrobat PDF (193 kB) 2012-02-03 / 2012-08-01
6 03 external photos test report WCDMAExternal Photos / Adobe Acrobat PDF (569 kB) 2012-02-03 / 2012-08-01
6 06 GSM test report diagramsTest Report / Adobe Acrobat PDF (2253 kB) 2012-02-03 / 2012-02-03
7 01_Class2_Permissive_Change-R2_0.pdfCover Letter(s) / Adobe Acrobat PDF (173 kB) 2013-02-05 / 2013-02-05
7 06_MPE report.pdfRF Exposure Info / Adobe Acrobat PDF (255 kB) 2013-02-05 / 2013-02-05
7 TestReport.pdfTest Report / Adobe Acrobat PDF (440 kB) 2013-02-05 / 2013-02-05
8 MANUALUsers Manual / Adobe Acrobat PDF (227 kB) 2016-04-22 / 2016-04-25
8 LabelID Label/Location Info / Adobe Acrobat PDF (104 kB) 2016-04-22 / 2016-04-25
8 Internal PhotosInternal Photos / Adobe Acrobat PDF (1443 kB) 2016-04-22 / 2016-04-25
8 External PhotosExternal Photos / Adobe Acrobat PDF (1443 kB) 2016-04-22 / 2016-04-25
8 RF Exposure ReportRF Exposure Info / Adobe Acrobat PDF (3577 kB) 2016-04-22 / 2016-04-25
8 Agents LetterCover Letter(s) / Adobe Acrobat PDF (436 kB) 2016-04-22 / 2016-04-25
8 C2PCCover Letter(s) / Adobe Acrobat PDF (395 kB) 2016-04-22 / 2016-04-25
9 Agent letterCover Letter(s) / Adobe Acrobat PDF (249 kB) 2016-11-07 / 2016-11-07
9 SAR test report - Part 1RF Exposure Info / Adobe Acrobat PDF (1829 kB) 2016-11-07 / 2016-11-07
9 SAR test report - Part 2RF Exposure Info / Adobe Acrobat PDF (5950 kB) 2016-11-07 / 2016-11-07
9 C2PC request letterCover Letter(s) / Adobe Acrobat PDF (131 kB) 2016-11-02 / 2016-11-07
9 SAR test report - Part 3RF Exposure Info / Adobe Acrobat PDF (596 kB) 2016-11-07 / 2016-11-07
9 Host labelID Label/Location Info / Adobe Acrobat PDF (174 kB) 2016-11-07 / 2016-11-07
9 Host user guideUsers Manual / Adobe Acrobat PDF (861 kB) 2016-11-07 / 2016-11-07
10 MDE_UBLOX_1918_MPE01_LISA_U200RF Exposure Info / Adobe Acrobat PDF (571 kB) 2019-09-07 / 2019-09-09
10 BackExternal Photos / Adobe Acrobat PDF (1342 kB) 2019-09-07 / 2020-03-06
10 ACB-Form-FCC-IC-Application-Letters-Confidentiality-LetterCover Letter(s) / Adobe Acrobat PDF (53 kB) 2019-09-07 / 2019-09-09
10 MDE_UBLOX_1918_FCC01-FINAL-2019-08-06Test Report / Adobe Acrobat PDF (2630 kB) 2019-09-07 / 2019-09-09
10 ExternalExternal Photos / Adobe Acrobat PDF (1565 kB) 2019-09-07 / 2020-03-06
10 Delta Description LISA-U_rev01Cover Letter(s) / Adobe Acrobat PDF (94 kB) 2019-09-07 / 2019-09-09
10 TempConfidential_MDE_UBLOX_1918_FCC01_Photo_Setup LISA-U200Test Setup Photos / Adobe Acrobat PDF (983 kB) 2019-09-07 / 2020-03-06
10 Front_without_shieldingInternal Photos / Adobe Acrobat PDF (1222 kB) 2019-09-07 / 2020-03-06
10 FCC Authority Letter to act a Agent_LISA-U200 LISA-U201Cover Letter(s) / Adobe Acrobat PDF (485 kB) 2019-09-07 / 2019-09-09
10 Label_FCCID Label/Location Info / Adobe Acrobat PDF (23 kB) 2019-09-07 / 2019-09-09
10 FCC Class II Permissive Change Request_rev01Cover Letter(s) / Adobe Acrobat PDF (35 kB) 2019-09-07 / 2019-09-09
10 LISA-U2_SysIntegrManualUsers Manual / Adobe Acrobat PDF (3590 kB) 2019-09-07 / 2020-03-06
10 FCC_request_modular_approval_LISAU200_rev01Cover Letter(s) / Adobe Acrobat PDF (1802 kB) 2019-09-07 / 2019-09-09
11 09 internal photosInternal Photos / Adobe Acrobat PDF (193 kB) 2012-02-03 / 2012-08-01
11 03 external photosExternal Photos / Adobe Acrobat PDF (1725 kB) 2012-02-03 / 2012-08-01
11 06 test reportTest Report / Adobe Acrobat PDF (1159 kB) 2012-02-03 / 2012-02-03
11 06 test report diagramsTest Report / Adobe Acrobat PDF (1047 kB) 2012-02-03 / 2012-02-03
11 07 test setupTest Setup Photos / Adobe Acrobat PDF (515 kB) 2012-02-03 / 2012-08-01
11 01 Label and placementID Label/Location Info / Adobe Acrobat PDF (190 kB) 2012-02-03 / 2012-02-03
11 08 integrators manualUsers Manual / Adobe Acrobat PDF (4019 kB) 2012-02-03 / 2012-08-01
11 02 request for confidentiality and STCCover Letter(s) / Adobe Acrobat PDF (580 kB) 2012-02-03 / 2012-02-03

APP # 1 (2017-12-11) Documents

SAR Test report - Part 2
 2017-12-05 / 2017-12-11 Test Report / Adobe Acrobat PDF (5950 kB)
C2PC letter
 2017-12-05 / 2017-12-11 Cover Letter(s) / Adobe Acrobat PDF (178 kB)
Host user guide
 2017-12-11 / 2017-12-11 Users Manual / Adobe Acrobat PDF (1378 kB)
SAR Test report - Part 3
 2017-12-05 / 2017-12-11 Test Report / Adobe Acrobat PDF (596 kB)
Similarity declaration
 2017-12-05 / 2017-12-11 Cover Letter(s) / Adobe Acrobat PDF (4858 kB)
SAR Test report - Part 1
 2017-12-05 / 2017-12-11 Test Report / Adobe Acrobat PDF (1829 kB)
Host user guide
 2017-12-11 / 2017-12-11 Users Manual / Adobe Acrobat PDF (1378 kB)
Agent letter
 2017-12-05 / 2017-12-11 Cover Letter(s) / Adobe Acrobat PDF (561 kB)
SAR Test report - Part 2
 2017-12-05 / 2017-12-11 Test Report / Adobe Acrobat PDF (5950 kB)
Agent letter
 2017-12-05 / 2017-12-11 Cover Letter(s) / Adobe Acrobat PDF (561 kB)
Host Label design and location
 2017-12-05 / 2017-12-11 ID Label/Location Info / Adobe Acrobat PDF (167 kB)
SAR Test report - Part 3
 2017-12-05 / 2017-12-11 Test Report / Adobe Acrobat PDF (596 kB)
C2PC letter
 2017-12-05 / 2017-12-11 Cover Letter(s) / Adobe Acrobat PDF (178 kB)
SAR Test report - Part 1
 2017-12-05 / 2017-12-11 Test Report / Adobe Acrobat PDF (1829 kB)
Similarity declaration
 2017-12-05 / 2017-12-11 Cover Letter(s) / Adobe Acrobat PDF (4858 kB)
Host Label design and location
 2017-12-05 / 2017-12-11 ID Label/Location Info / Adobe Acrobat PDF (167 kB)

APP # 2 (2017-04-17) Documents

Host label
 2017-04-17 / 2017-04-17 ID Label/Location Info / JPEG Image (53 kB)
Host user guide
 2017-04-17 / 2017-04-17 Users Manual / Adobe Acrobat PDF (1459 kB)
Host user guide
 2017-04-17 / 2017-04-17 Users Manual / Adobe Acrobat PDF (1459 kB)
SAR test report
 2017-04-17 / 2017-04-17 Test Report / Adobe Acrobat PDF (4660 kB)
Agent letter
 2017-04-17 / 2017-04-17 Cover Letter(s) / Adobe Acrobat PDF (3645 kB)
C2PC request letter
 2017-04-17 / 2017-04-17 Cover Letter(s) / Adobe Acrobat PDF (399 kB)
Agent letter
 2017-04-17 / 2017-04-17 Cover Letter(s) / Adobe Acrobat PDF (3645 kB)
SAR test report
 2017-04-17 / 2017-04-17 Test Report / Adobe Acrobat PDF (4660 kB)
C2PC request letter
 2017-04-17 / 2017-04-17 Cover Letter(s) / Adobe Acrobat PDF (399 kB)
Agent letter
 2017-04-17 / 2017-04-17 Cover Letter(s) / Adobe Acrobat PDF (3645 kB)
Host label
 2017-04-17 / 2017-04-17 ID Label/Location Info / JPEG Image (53 kB)

APP # 3 (2012-11-21) Documents

Request_for_Confidentiality.pdf
 2012-11-21 / 2012-11-21 Cover Letter(s) / Adobe Acrobat PDF (330 kB)
TestReportAnnex1.pdf
 2012-11-21 / 2012-11-21 Test Report / Adobe Acrobat PDF (2018 kB)
TestReportAnnex3.pdf
 2012-11-21 / 2012-11-21 Test Report / Adobe Acrobat PDF (481 kB)
Internal photo.pdf
 2012-11-21 / 2013-05-20 Internal Photos / Adobe Acrobat PDF (57 kB)
RF Exposure_TR6-0143-12-11-2c.pdf
 2012-11-21 / 2012-11-21 RF Exposure Info / Adobe Acrobat PDF (1184 kB)
TestReportAnnex2.pdf
 2012-11-21 / 2012-11-21 Test Report / Adobe Acrobat PDF (585 kB)
Request_for_Confidentiality.pdf
 2012-11-21 / 2012-11-21 Cover Letter(s) / Adobe Acrobat PDF (330 kB)
Test Report.pdf
 2012-11-21 / 2012-11-21 Test Report / Adobe Acrobat PDF (1611 kB)
TestReportAnnex3.pdf
 2012-11-21 / 2012-11-21 Test Report / Adobe Acrobat PDF (481 kB)
RF Exposure_TR6-0143-12-11-2c.pdf
 2012-11-21 / 2012-11-21 RF Exposure Info / Adobe Acrobat PDF (1184 kB)
Test Setup photos.pdf
 2012-11-21 / 2012-11-21 Test Setup Photos / Adobe Acrobat PDF (706 kB)
Class2_Permissive_Change_Cover Letter.pdf
 2012-11-21 / 2012-11-21 Cover Letter(s) / Adobe Acrobat PDF (167 kB)
Test Report.pdf
 2012-11-21 / 2012-11-21 Test Report / Adobe Acrobat PDF (1611 kB)
BOM.pdf
 2012-11-21 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (310 kB)
TestReportAnnex1.pdf
 2012-11-21 / 2012-11-21 Test Report / Adobe Acrobat PDF (2018 kB)
Internal photo.pdf
 2012-11-21 / 2013-05-20 Internal Photos / Adobe Acrobat PDF (57 kB)
Test Setup photos.pdf
 2012-11-21 / 2012-11-21 Test Setup Photos / Adobe Acrobat PDF (706 kB)
TestReportAnnex2.pdf
 2012-11-21 / 2012-11-21 Test Report / Adobe Acrobat PDF (585 kB)
Class2_Permissive_Change_Cover Letter.pdf
 2012-11-21 / 2012-11-21 Cover Letter(s) / Adobe Acrobat PDF (167 kB)

APP # 4 (2013-02-05) Documents

06_MPE report.pdf
 2013-02-05 / 2013-02-05 RF Exposure Info / Adobe Acrobat PDF (255 kB)
TestReport.pdf
 2013-02-05 / 2013-02-05 Test Report / Adobe Acrobat PDF (440 kB)
01_Class2_Permissive_Change-R2_0.pdf
 2013-02-05 / 2013-02-05 Cover Letter(s) / Adobe Acrobat PDF (173 kB)
06_MPE report.pdf
 2013-02-05 / 2013-02-05 RF Exposure Info / Adobe Acrobat PDF (255 kB)
TestReport.pdf
 2013-02-05 / 2013-02-05 Test Report / Adobe Acrobat PDF (440 kB)
01_Class2_Permissive_Change-R2_0.pdf
 2013-02-05 / 2013-02-05 Cover Letter(s) / Adobe Acrobat PDF (173 kB)

APP # 5 (2013-12-12) Documents

Request_for_Confidentiality
 2013-12-12 / 2013-12-12 Cover Letter(s) / Adobe Acrobat PDF (146 kB)
Test setup photos
 2013-12-12 / 2013-12-12 Test Setup Photos / Adobe Acrobat PDF (691 kB)
Test report
 2013-12-12 / 2013-12-12 Test Report / Adobe Acrobat PDF (1695 kB)
Test report
 2013-12-12 / 2013-12-12 Test Report / Adobe Acrobat PDF (1695 kB)
Test report - plots
 2013-12-12 / 2013-12-12 Test Report / Adobe Acrobat PDF (1642 kB)
Cover Letter- Class2_Permissive_Change
 2013-12-12 / 2013-12-12 Cover Letter(s) / Adobe Acrobat PDF (115 kB)
Test report - plots
 2013-12-12 / 2013-12-12 Test Report / Adobe Acrobat PDF (1642 kB)
Test setup photos
 2013-12-12 / 2013-12-12 Test Setup Photos / Adobe Acrobat PDF (691 kB)
Label and Label location
 2013-12-12 / 2013-12-12 ID Label/Location Info / Adobe Acrobat PDF (166 kB)
Label and Label location
 2013-12-12 / 2013-12-12 ID Label/Location Info / Adobe Acrobat PDF (166 kB)
Cover Letter- Class2_Permissive_Change
 2013-12-12 / 2013-12-12 Cover Letter(s) / Adobe Acrobat PDF (115 kB)
Parts List
 2013-12-12 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (219 kB)
Request_for_Confidentiality
 2013-12-12 / 2013-12-12 Cover Letter(s) / Adobe Acrobat PDF (146 kB)

APP # 6 (2012-02-03) Documents

06 GSM test report diagrams
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (2253 kB)
03 external photos test report GSM
 2012-02-03 / 2012-08-01 External Photos / Adobe Acrobat PDF (569 kB)
07 test setup photos GSM
 2012-05-25 / 2012-08-01 Test Setup Photos / Adobe Acrobat PDF (490 kB)
06 Test report GSM
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (1436 kB)
02 request for confidentiality and STC
 2012-02-03 / 2012-02-03 Cover Letter(s) / Adobe Acrobat PDF (580 kB)
11 revised MPE report
 2012-05-25 / 2012-02-03 RF Exposure Info / Adobe Acrobat PDF (72 kB)
08 integrators manual
 2012-02-03 / 2012-08-01 Users Manual / Adobe Acrobat PDF (4019 kB)
09 internal photos
 2012-02-03 / 2012-08-01 Internal Photos / Adobe Acrobat PDF (193 kB)
06 Test report GSM
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (1436 kB)
03 external photos test report WCDMA
 2012-02-03 / 2012-08-01 External Photos / Adobe Acrobat PDF (569 kB)
07 test setup photos UMTS
 2012-05-25 / 2012-08-01 Test Setup Photos / Adobe Acrobat PDF (504 kB)
06 WCDMA test report
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (1572 kB)
03 external photos test report GSM
 2012-02-03 / 2012-08-01 External Photos / Adobe Acrobat PDF (569 kB)
12 operational description
 2012-02-03 / N/A Operational Description / Adobe Acrobat PDF (1438 kB)
08 revised integrators manual
 2012-05-25 / 2012-08-01 Users Manual / Adobe Acrobat PDF (2187 kB)
01 Label and placement
 2012-02-03 / 2012-02-03 ID Label/Location Info / Adobe Acrobat PDF (190 kB)
06 WCDMA test report
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (1572 kB)
06 Test report GSM
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (1436 kB)
08 revised integrators manual
 2012-05-25 / 2012-08-01 Users Manual / Adobe Acrobat PDF (2187 kB)
13 supercede request
 2012-05-25 / 2012-02-03 Cover Letter(s) / Adobe Acrobat PDF (143 kB)
06 WCDMA test report diagrams
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (1450 kB)
03 external photos test report WCDMA
 2012-02-03 / 2012-08-01 External Photos / Adobe Acrobat PDF (569 kB)
09 internal photos
 2012-02-03 / 2012-08-01 Internal Photos / Adobe Acrobat PDF (193 kB)
02 request for confidentiality and STC
 2012-02-03 / 2012-02-03 Cover Letter(s) / Adobe Acrobat PDF (580 kB)
06 WCDMA test report diagrams
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (1450 kB)
06 WCDMA test report
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (1572 kB)
11 revised MPE report
 2012-05-25 / 2012-02-03 RF Exposure Info / Adobe Acrobat PDF (72 kB)
01 Label and placement
 2012-02-03 / 2012-02-03 ID Label/Location Info / Adobe Acrobat PDF (190 kB)
06 GSM test report diagrams
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (2253 kB)
04 block diagram
 2012-02-03 / N/A Block Diagram / Adobe Acrobat PDF (4019 kB)
10 Tune up and boms
 2012-02-03 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (1026 kB)
03 external photos test report GSM
 2012-02-03 / 2012-08-01 External Photos / Adobe Acrobat PDF (569 kB)
07 test setup photos GSM
 2012-05-25 / 2012-08-01 Test Setup Photos / Adobe Acrobat PDF (490 kB)
06 WCDMA test report diagrams
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (1450 kB)
13 supercede request
 2012-05-25 / 2012-02-03 Cover Letter(s) / Adobe Acrobat PDF (143 kB)
05 Schematics
 2012-02-03 / N/A Schematics / Adobe Acrobat PDF (255 kB)
02 request for confidentiality and STC
 2012-02-03 / 2012-02-03 Cover Letter(s) / Adobe Acrobat PDF (580 kB)
09 internal photos
 2012-02-03 / 2012-08-01 Internal Photos / Adobe Acrobat PDF (193 kB)
03 external photos test report WCDMA
 2012-02-03 / 2012-08-01 External Photos / Adobe Acrobat PDF (569 kB)
01 Label and placement
 2012-02-03 / 2012-02-03 ID Label/Location Info / Adobe Acrobat PDF (190 kB)
11 MPE report
 2012-02-03 / 2012-02-03 RF Exposure Info / Adobe Acrobat PDF (1029 kB)
07 test setup photos UMTS
 2012-05-25 / 2012-08-01 Test Setup Photos / Adobe Acrobat PDF (504 kB)
06 GSM test report diagrams
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (2253 kB)

APP # 7 (2013-02-05) Documents

06_MPE report.pdf
 2013-02-05 / 2013-02-05 RF Exposure Info / Adobe Acrobat PDF (255 kB)
TestReport.pdf
 2013-02-05 / 2013-02-05 Test Report / Adobe Acrobat PDF (440 kB)
01_Class2_Permissive_Change-R2_0.pdf
 2013-02-05 / 2013-02-05 Cover Letter(s) / Adobe Acrobat PDF (173 kB)
06_MPE report.pdf
 2013-02-05 / 2013-02-05 RF Exposure Info / Adobe Acrobat PDF (255 kB)
TestReport.pdf
 2013-02-05 / 2013-02-05 Test Report / Adobe Acrobat PDF (440 kB)
01_Class2_Permissive_Change-R2_0.pdf
 2013-02-05 / 2013-02-05 Cover Letter(s) / Adobe Acrobat PDF (173 kB)

APP # 8 (2016-04-25) Documents

RF Exposure Report
 2016-04-22 / 2016-04-25 RF Exposure Info / Adobe Acrobat PDF (3577 kB)
C2PC
 2016-04-22 / 2016-04-25 Cover Letter(s) / Adobe Acrobat PDF (395 kB)
MANUAL
 2016-04-22 / 2016-04-25 Users Manual / Adobe Acrobat PDF (227 kB)
Label
 2016-04-22 / 2016-04-25 ID Label/Location Info / Adobe Acrobat PDF (104 kB)
External Photos
 2016-04-22 / 2016-04-25 External Photos / Adobe Acrobat PDF (1443 kB)
Internal Photos
 2016-04-22 / 2016-04-25 Internal Photos / Adobe Acrobat PDF (1443 kB)
External Photos
 2016-04-22 / 2016-04-25 External Photos / Adobe Acrobat PDF (1443 kB)
Internal Photos
 2016-04-22 / 2016-04-25 Internal Photos / Adobe Acrobat PDF (1443 kB)
RF Exposure Report
 2016-04-22 / 2016-04-25 RF Exposure Info / Adobe Acrobat PDF (3577 kB)
Label
 2016-04-22 / 2016-04-25 ID Label/Location Info / Adobe Acrobat PDF (104 kB)
Agents Letter
 2016-04-22 / 2016-04-25 Cover Letter(s) / Adobe Acrobat PDF (436 kB)
MANUAL
 2016-04-22 / 2016-04-25 Users Manual / Adobe Acrobat PDF (227 kB)
Agents Letter
 2016-04-22 / 2016-04-25 Cover Letter(s) / Adobe Acrobat PDF (436 kB)
C2PC
 2016-04-22 / 2016-04-25 Cover Letter(s) / Adobe Acrobat PDF (395 kB)

APP # 9 (2016-11-07) Documents

SAR test report - Part 1
 2016-11-07 / 2016-11-07 RF Exposure Info / Adobe Acrobat PDF (1829 kB)
Agent letter
 2016-11-07 / 2016-11-07 Cover Letter(s) / Adobe Acrobat PDF (249 kB)
SAR test report - Part 2
 2016-11-07 / 2016-11-07 RF Exposure Info / Adobe Acrobat PDF (5950 kB)
Agent letter
 2016-11-07 / 2016-11-07 Cover Letter(s) / Adobe Acrobat PDF (249 kB)
SAR test report - Part 1
 2016-11-07 / 2016-11-07 RF Exposure Info / Adobe Acrobat PDF (1829 kB)
SAR test report - Part 3
 2016-11-07 / 2016-11-07 RF Exposure Info / Adobe Acrobat PDF (596 kB)
C2PC request letter
 2016-11-02 / 2016-11-07 Cover Letter(s) / Adobe Acrobat PDF (131 kB)
SAR test report - Part 2
 2016-11-07 / 2016-11-07 RF Exposure Info / Adobe Acrobat PDF (5950 kB)
C2PC request letter
 2016-11-02 / 2016-11-07 Cover Letter(s) / Adobe Acrobat PDF (131 kB)
Host label
 2016-11-07 / 2016-11-07 ID Label/Location Info / Adobe Acrobat PDF (174 kB)
SAR test report - Part 3
 2016-11-07 / 2016-11-07 RF Exposure Info / Adobe Acrobat PDF (596 kB)
Host label
 2016-11-07 / 2016-11-07 ID Label/Location Info / Adobe Acrobat PDF (174 kB)
Host user guide
 2016-11-07 / 2016-11-07 Users Manual / Adobe Acrobat PDF (861 kB)
Host user guide
 2016-11-07 / 2016-11-07 Users Manual / Adobe Acrobat PDF (861 kB)

APP # 10 (2019-09-09) Documents

LISA-U2XX_Tune_Up_Procedure
 2019-09-07 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (192 kB)
MDE_UBLOX_1918_MPE01_LISA_U200
 2019-09-07 / 2019-09-09 RF Exposure Info / Adobe Acrobat PDF (571 kB)
Front_without_shielding
 2019-09-07 / 2020-03-06 Internal Photos / Adobe Acrobat PDF (1222 kB)
Back
 2019-09-07 / 2020-03-06 External Photos / Adobe Acrobat PDF (1342 kB)
ACB-Form-FCC-IC-Application-Letters-Confidentiality-Letter
 2019-09-07 / 2019-09-09 Cover Letter(s) / Adobe Acrobat PDF (53 kB)
Delta Description LISA-U_rev01
 2019-09-07 / 2019-09-09 Cover Letter(s) / Adobe Acrobat PDF (94 kB)
LISA-U2_DataSheet
 2019-09-07 / N/A Operational Description / Adobe Acrobat PDF (1799 kB)
MDE_UBLOX_1918_FCC01-FINAL-2019-08-06
 2019-09-07 / 2019-09-09 Test Report / Adobe Acrobat PDF (2630 kB)
IP02_HW_BM_146DB0
 2019-09-07 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (214 kB)
External
 2019-09-07 / 2020-03-06 External Photos / Adobe Acrobat PDF (1565 kB)
External
 2019-09-07 / 2020-03-06 External Photos / Adobe Acrobat PDF (1565 kB)
Delta Description LISA-U_rev01
 2019-09-07 / 2019-09-09 Cover Letter(s) / Adobe Acrobat PDF (94 kB)
TempConfidential_MDE_UBLOX_1918_FCC01_Photo_Setup LISA-U200
 2019-09-07 / 2020-03-06 Test Setup Photos / Adobe Acrobat PDF (983 kB)
LISA-U2_SysIntegrManual
 2019-09-07 / 2020-03-06 Users Manual / Adobe Acrobat PDF (3590 kB)
IP02_HW_HS_146DB0
 2019-09-07 / N/A Schematics / Adobe Acrobat PDF (542 kB)
Front_without_shielding
 2019-09-07 / 2020-03-06 Internal Photos / Adobe Acrobat PDF (1222 kB)
FCC Authority Letter to act a Agent_LISA-U200 LISA-U201
 2019-09-07 / 2019-09-09 Cover Letter(s) / Adobe Acrobat PDF (485 kB)
FCC Authority Letter to act a Agent_LISA-U200 LISA-U201
 2019-09-07 / 2019-09-09 Cover Letter(s) / Adobe Acrobat PDF (485 kB)
ACB-Form-FCC-IC-Application-Letters-Confidentiality-Letter
 2019-09-07 / 2019-09-09 Cover Letter(s) / Adobe Acrobat PDF (53 kB)
MDE_UBLOX_1918_FCC01-FINAL-2019-08-06
 2019-09-07 / 2019-09-09 Test Report / Adobe Acrobat PDF (2630 kB)
IP02_HW_HS_146DB0_rev01
 2019-09-07 / N/A Block Diagram / Adobe Acrobat PDF (63 kB)
Label_FCC
 2019-09-07 / 2019-09-09 ID Label/Location Info / Adobe Acrobat PDF (23 kB)
FCC Class II Permissive Change Request_rev01
 2019-09-07 / 2019-09-09 Cover Letter(s) / Adobe Acrobat PDF (35 kB)
FCC Class II Permissive Change Request_rev01
 2019-09-07 / 2019-09-09 Cover Letter(s) / Adobe Acrobat PDF (35 kB)
Antenna_spec_Taoglas_GSA8821
 2019-09-07 / N/A Operational Description / Adobe Acrobat PDF (576 kB)
MDE_UBLOX_1918_MPE01_LISA_U200
 2019-09-07 / 2019-09-09 RF Exposure Info / Adobe Acrobat PDF (571 kB)
Label_FCC
 2019-09-07 / 2019-09-09 ID Label/Location Info / Adobe Acrobat PDF (23 kB)
LISA-U2_SysIntegrManual
 2019-09-07 / 2020-03-06 Users Manual / Adobe Acrobat PDF (3590 kB)
FCC_request_modular_approval_LISAU200_rev01
 2019-09-07 / 2019-09-09 Cover Letter(s) / Adobe Acrobat PDF (1802 kB)
FCC_request_modular_approval_LISAU200_rev01
 2019-09-07 / 2019-09-09 Cover Letter(s) / Adobe Acrobat PDF (1802 kB)
TempConfidential_MDE_UBLOX_1918_FCC01_Photo_Setup LISA-U200
 2019-09-07 / 2020-03-06 Test Setup Photos / Adobe Acrobat PDF (983 kB)
Back
 2019-09-07 / 2020-03-06 External Photos / Adobe Acrobat PDF (1342 kB)

APP # 11 (2012-02-03) Documents

06 test report diagrams
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (1047 kB)
01 Label and placement
 2012-02-03 / 2012-02-03 ID Label/Location Info / Adobe Acrobat PDF (190 kB)
09 internal photos
 2012-02-03 / 2012-08-01 Internal Photos / Adobe Acrobat PDF (193 kB)
03 external photos
 2012-02-03 / 2012-08-01 External Photos / Adobe Acrobat PDF (1725 kB)
07 test setup
 2012-02-03 / 2012-08-01 Test Setup Photos / Adobe Acrobat PDF (515 kB)
02 request for confidentiality and STC
 2012-02-03 / 2012-02-03 Cover Letter(s) / Adobe Acrobat PDF (580 kB)
06 test report
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (1159 kB)
08 integrators manual
 2012-02-03 / 2012-08-01 Users Manual / Adobe Acrobat PDF (4019 kB)
03 external photos
 2012-02-03 / 2012-08-01 External Photos / Adobe Acrobat PDF (1725 kB)
06 test report diagrams
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (1047 kB)
09 internal photos
 2012-02-03 / 2012-08-01 Internal Photos / Adobe Acrobat PDF (193 kB)
04 block diagram
 2012-02-03 / N/A Block Diagram / Adobe Acrobat PDF (4019 kB)
07 test setup
 2012-02-03 / 2012-08-01 Test Setup Photos / Adobe Acrobat PDF (515 kB)
01 Label and placement
 2012-02-03 / 2012-02-03 ID Label/Location Info / Adobe Acrobat PDF (190 kB)
06 test report
 2012-02-03 / 2012-02-03 Test Report / Adobe Acrobat PDF (1159 kB)
08 integrators manual
 2012-02-03 / 2012-08-01 Users Manual / Adobe Acrobat PDF (4019 kB)
02 request for confidentiality and STC
 2012-02-03 / 2012-02-03 Cover Letter(s) / Adobe Acrobat PDF (580 kB)

Grants

TCB Grant from App #1 (2017-12-11)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  DEKRA Testing and Certification, S.A.U.
Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6
Campanillas - Malaga, 29590
Spain
Date of Grant: 12/11/2017

Application Dated: 12/05/2017
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: LISAU200 for the 3M DV GPS Proximity Notification Unit
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KGXW
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KGXW
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W
27 1712.4  -  1742.5 0.371 0.012  PM 4M64F9W

Single Limited Modular approval limited to the host 3M DV GPS Proximity Notification Unit.

Antenna integrated. Ouput power is conducted.

The highest reported SAR for extremities exposure conditions is 0.410 W/Kg.

This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations.


EAS Grant from App #1 (2017-12-11)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 12/11/2017

Application Dated: 12/05/2017
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: LISAU200 for the 3M DV GPS Proximity Notification Unit
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KGXW
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KGXW
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W
27 1712.4  -  1742.5 0.371 0.012  PM 4M64F9W

Single Limited Modular approval limited to the host 3M DV GPS Proximity Notification Unit.

Antenna integrated. Ouput power is conducted.

The highest reported SAR for extremities exposure conditions is 0.410 W/Kg.

This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations.



Mail To:


EA251580

TCB Grant from App #2 (2017-04-17)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  AT4 wireless S.A.U.
Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6
Malaga, 29590
Spain
Date of Grant: 04/17/2017

Application Dated: 04/17/2017
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: LISAU200 for the 3M TD4i host
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KGXW
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KGXW
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W
27 1712.4  -  1742.5 0.371 0.012  PM 4M64F9W

Single Limited Modular approval limited to the host 3M One Piece GPS Tracking Device 4i.

Antenna integrated. Ouput power is conducted.

The highest reported SAR for extremities exposure conditions is 0.410 W/Kg.

This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations.


EAS Grant from App #2 (2017-04-17)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 04/17/2017

Application Dated: 04/17/2017
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: LISAU200 for the 3M TD4i host
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KGXW
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KGXW
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W
27 1712.4  -  1742.5 0.371 0.012  PM 4M64F9W

Single Limited Modular approval limited to the host 3M One Piece GPS Tracking Device 4i.

Antenna integrated. Ouput power is conducted.

The highest reported SAR for extremities exposure conditions is 0.410 W/Kg.

This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations.



Mail To:


EA757027

TCB Grant from App #3 (2012-11-21)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 11/21/2012

Application Dated: 11/21/2012
u-blox AG
u-blox AG
att. Giulio Comar
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 3.75G HSPA Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KGXW
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KGXW
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W

Permissive Change Class II Licensed Modular Transmitter. Output power listed is conducted.

This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.

The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.


EAS Grant from App #3 (2012-11-21)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
u-blox AG att. Giulio Comar
Thalwil, Ch-8800
Switzerland
  Date of Grant: 11/21/2012

Application Dated: 11/21/2012
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 3.75G HSPA Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KGXW
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KGXW
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W

Permissive Change Class II Licensed Modular Transmitter. Output power listed is conducted.

This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.

The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.



Mail To:


EA193378

TCB Grant from App #4 (2013-02-05)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 02/05/2013

Application Dated: 02/05/2013
u-blox AG
u-blox AG
att. Giulio Comar
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 3.75G HSPA Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  -       


EAS Grant from App #4 (2013-02-05)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
u-blox AG att. Giulio Comar
Thalwil, Ch-8800
Switzerland
  Date of Grant: 02/05/2013

Application Dated: 02/05/2013
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 3.75G HSPA Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  -       



Mail To:


EA514299

TCB Grant from App #5 (2013-12-12)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 12/12/2013

Application Dated: 12/12/2013
u-blox AG
u-blox AG
att. Giulio Comar
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 3.75G HSPA Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KG7W
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KG7W
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W
27 1712.4  -  1752.5 0.371 0.012  PM 4M64F9W

Permissive Change Class II Licensed Modular Transmitter. Output power listed is conducted. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

EAS Grant from App #5 (2013-12-12)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
u-blox AG att. Giulio Comar
Thalwil, Ch-8800
Switzerland
  Date of Grant: 12/12/2013

Application Dated: 12/12/2013
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 3.75G HSPA Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KG7W
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KG7W
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W
27 1712.4  -  1752.5 0.371 0.012  PM 4M64F9W

Permissive Change Class II Licensed Modular Transmitter. Output power listed is conducted. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.



Mail To:


EA138481

TCB Grant from App #6 (2012-02-03)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 02/03/2012

Application Dated: 02/03/2012
u-blox AG
u-blox AG
att. Giulio Comar
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 3.75G HSPA Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KG7W
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KG7W
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W

Licensed Modular Transmitter. Output power listed is conducted.

This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.

The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.


EAS Grant from App #6 (2012-02-03)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
u-blox AG att. Giulio Comar
Thalwil, Ch-8800
Switzerland
  Date of Grant: 02/03/2012

Application Dated: 02/03/2012
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 3.75G HSPA Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KG7W
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KG7W
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W

Licensed Modular Transmitter. Output power listed is conducted.

This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.

The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.



Mail To:


EA174277

TCB Grant from App #7 (2013-02-05)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 02/05/2013

Application Dated: 02/05/2013
u-blox AG
u-blox AG
att. Giulio Comar
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 3.75G HSPA Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KGXW
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KGXW
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W
27 1712.4  -  1752.5 0.371 0.012  PM 4M64F9W

Permissive Change Class II

Licensed Modular Transmitter. Output power listed is conducted. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E, 27. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.


EAS Grant from App #7 (2013-02-05)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
u-blox AG att. Giulio Comar
Thalwil, Ch-8800
Switzerland
  Date of Grant: 02/05/2013

Application Dated: 02/05/2013
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 3.75G HSPA Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KGXW
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KGXW
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W
27 1712.4  -  1752.5 0.371 0.012  PM 4M64F9W

Permissive Change Class II

Licensed Modular Transmitter. Output power listed is conducted. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E, 27. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.



Mail To:


EA390184

TCB Grant from App #8 (2016-04-25)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 04/25/2016

Application Dated: 04/22/2016
u-blox AG
u-blox AG
att. Giulio Comar
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: Cell Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 2.1  PM 300GXW
22H 824.2  -  848.8 0.537 2.6  PM 300G7W
22H 826.4  -  846.6 0.206 1.3  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 1.3  PM 300GXW
24E 1850.2  -  1909.8 0.444 1.8  PM 300G7W
24E 1852.4  -  1907.6 0.236 2.3  PM 4M56F9W
27 1712.4  -  1752.5 0.371 1.2  PM 4M64F9W

C2PC as described in this filing. Single Modular Approval. Power output listed is conducted. SAR compliance for body worn operating configurations must be restricted to maintain a minimum separation distance of 1.0 cm and contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for body-worn accessory is 1.49W/kg.

EAS Grant from App #8 (2016-04-25)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
u-blox AG att. Giulio Comar
Thalwil, Ch-8800
Switzerland
  Date of Grant: 04/25/2016

Application Dated: 04/22/2016
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: Cell Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 2.1  PM 300GXW
22H 824.2  -  848.8 0.537 2.6  PM 300G7W
22H 826.4  -  846.6 0.206 1.3  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 1.3  PM 300GXW
24E 1850.2  -  1909.8 0.444 1.8  PM 300G7W
24E 1852.4  -  1907.6 0.236 2.3  PM 4M56F9W
27 1712.4  -  1752.5 0.371 1.2  PM 4M64F9W

C2PC as described in this filing. Single Modular Approval. Power output listed is conducted. SAR compliance for body worn operating configurations must be restricted to maintain a minimum separation distance of 1.0 cm and contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for body-worn accessory is 1.49W/kg.



Mail To:


EA971237

TCB Grant from App #9 (2016-11-07)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  AT4 wireless S.A.U.
Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6
Malaga, 29590
Spain
Date of Grant: 11/07/2016

Application Dated: 11/02/2016
u-blox AG
u-blox AG
att. Giulio Comar
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: LISAU200 for the 3M Offender host
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KGXW
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KGXW
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W
27 1712.4  -  1752.5 0.371 0.012  PM 4M64F9W

Single Limited Modular approval limited to the host 3M Two-Piece GPS Offender Tracking Unit (V6). Antenna integrated.

Ouput power is conducted.

The highest reported SAR for head exposure conditions is 1.31 W/Kg. The highest reported SAR for body exposure conditions is 1.49 W/Kg.

This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations.


EAS Grant from App #9 (2016-11-07)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
u-blox AG att. Giulio Comar
Thalwil, Ch-8800
Switzerland
  Date of Grant: 11/07/2016

Application Dated: 11/02/2016
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: LISAU200 for the 3M Offender host
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
22H 824.2  -  848.8 0.537 0.026  PM 300KGXW
22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
24E 1850.2  -  1909.8 0.444 0.018  PM 300KGXW
24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W
27 1712.4  -  1752.5 0.371 0.012  PM 4M64F9W

Single Limited Modular approval limited to the host 3M Two-Piece GPS Offender Tracking Unit (V6). Antenna integrated.

Ouput power is conducted.

The highest reported SAR for head exposure conditions is 1.31 W/Kg. The highest reported SAR for body exposure conditions is 1.49 W/Kg.

This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations.



Mail To:


EA288653

TCB Grant from App #10 (2019-09-09)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/09/2019

Application Dated: 09/07/2019
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: UMTS/GSM data and voice module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
BC 22H 824.2  -  848.8 0.537 0.026  PM 300KG7W
BC 22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
BC 24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
BC 24E 1850.2  -  1909.8 0.444 0.018  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W
BC 27 1712.4  -  1752.6 0.371 0.012  PM 4M64F9W

Permissive Change Class II Licensed Modular Transmitter. Output power listed is conducted. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. (Grant Note on 12/12/2013)

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change with some hardware modifications, as documented in this filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant from App #10 (2019-09-09)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 09/09/2019

Application Dated: 09/07/2019
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: UMTS/GSM data and voice module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.849 0.021  PM 300KGXW
BC 22H 824.2  -  848.8 0.537 0.026  PM 300KG7W
BC 22H 826.4  -  846.6 0.206 0.013  PM 4M56F9W
BC 24E 1850.2  -  1909.8 1.064 0.013  PM 300KGXW
BC 24E 1850.2  -  1909.8 0.444 0.018  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.236 0.028  PM 4M56F9W
BC 27 1712.4  -  1752.6 0.371 0.012  PM 4M64F9W

Permissive Change Class II Licensed Modular Transmitter. Output power listed is conducted. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. (Grant Note on 12/12/2013)

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change with some hardware modifications, as documented in this filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA471913

TCB Grant from App #11 (2012-02-03)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 02/03/2012

Application Dated: 02/03/2012
u-blox AG
u-blox AG
att. Giulio Comar
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 3.75G HSPA Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  -       


EAS Grant from App #11 (2012-02-03)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
u-blox AG att. Giulio Comar
Thalwil, Ch-8800
Switzerland
  Date of Grant: 02/03/2012

Application Dated: 02/03/2012
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYLISAU200
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 3.75G HSPA Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  -       



Mail To:


EA230944

Applications for this FCC ID

Form App # 1 (2017-12-11)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: u-blox AG
FCC Registration Number (FRN): 0019077858
Alphanumeric FCC ID: XPYLISAU200
Unique Application Identifier: bi4UQv8CYAbtNRV38+WNPA==
Line one: Zuercherstrasse 68
City: Thalwil
State: N/A
Country: Switzerland
Zip Code: Ch-8800

TCB Information
TCB Application Email Address: admin.rcb.es@dekra.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: XPY
Product Code: LISAU200

Person at the applicant's address to receive grant or for contact
Name: Giulio Comar
Title: Certification Manager
Telephone Number: +390402529400 Extension:
Fax Number: +390402529394
Email: giulio.comar@u-blox.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): LISAU200 for the 3M DV GPS Proximity Notification Unit

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   DEKRA Testing and Certification, S.A.U.
First Name:   Francisco
Last Name:   Canas Escribano
Telephone Number: 34-9562-619100 Extension:
Fax Number:  34-9562-619113
E-mail:  francisco.canas@dekra.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Limited Modular approval limited to the host 3M DV GPS Proximity Notification Unit. Antenna integrated. Ouput power is conducted. The highest reported SAR for extremities exposure conditions is 0.410 W/Kg. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Giulio Comar
Title of authorized signature:  Certification Manager

Complete items below if agent signs the application:

Firm Name:  DEKRA Testing and Certification, S.A.U.
Name:  Antonio Antonio Antonio
Line 1:  Antonio
Line 2:  Antonio
P.O. Box:  Antonio
City:  Antonio
State:  Antonio
Country:  Antonio
Zip Code:  Antonio
Telephone Number:  +34952619198
Fax Number:  +34952619113
E-mail:  antonio.olivares@dekra.com

Form App # 2 (2017-04-17)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: u-blox AG
FCC Registration Number (FRN): 0019077858
Alphanumeric FCC ID: XPYLISAU200
Unique Application Identifier: C7SQ1onPU9YL7j61A+rOhg==
Line one: Zuercherstrasse 68
City: Thalwil
State: N/A
Country: Switzerland
Zip Code: Ch-8800

TCB Information
TCB Application Email Address: admin.rcb.es@dekra.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: XPY
Product Code: LISAU200

Person at the applicant's address to receive grant or for contact
Name: Giulio Comar
Title: Certification Manager
Telephone Number: +390402529400 Extension:
Fax Number: +390402529394
Email: giulio.comar@u-blox.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): LISAU200 for the 3M TD4i host

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   AT4 wireless S.A.
First Name:   Francisco
Last Name:   Canas Escribano
Telephone Number: 34-9562-619100 Extension:
Fax Number:  34-9562-619113
E-mail:  fcanas@at4wireless.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Limited Modular approval limited to the host 3M One Piece GPS Tracking Device 4i. Antenna integrated. Ouput power is conducted. The highest reported SAR for extremities exposure conditions is 0.410 W/Kg. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Giulio Comar
Title of authorized signature:  Certification Manager

Complete items below if agent signs the application:

Firm Name:  AT4 wireless
Name:  Antonio Antonio Antonio
Line 1:  Antonio
Line 2:  Antonio
P.O. Box:  Antonio
City:  Antonio
State:  Antonio
Country:  Antonio
Zip Code:  Antonio
Telephone Number:  +34952619198
Fax Number:  +34952619113
E-mail:  antonio.olivares@dekra.com

Form App # 3 (2012-11-21)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: u-blox AG
FCC Registration Number (FRN): 0024534505
Alphanumeric FCC ID: XPYLISAU200
Unique Application Identifier: EeyU61K0qpGj3klPcTlXSA==
Line one: u-blox AG
Line two: att. Giulio Comar
City: Thalwil
State: N/A
Country: Switzerland
Zip Code: Ch-8800

TCB Information
TCB Application Email Address: oliver.kneip@cetecom.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: XPY
Product Code: LISAU200

Person at the applicant's address to receive grant or for contact
Name: Giulio Comar
Title: Certification Manager
Telephone Number: +390402529400 Extension:
Fax Number: +390402529394
Email: giulio.comar@u-blox.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   05/20/2013
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 3.75G HSPA Wireless Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   CETECOM GmbH
First Name:   Rachid
Last Name:   Acharkaoui
Telephone Number: 49-2054-9519-250 Extension:
Fax Number:  49-2054-9519-964
E-mail:  rachid.acharkaoui@cetecom.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Permissive Change Class II Licensed Modular Transmitter. Output power listed is conducted. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ezra Stein
Title of authorized signature: 

Form App # 4 (2013-02-05)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: u-blox AG
FCC Registration Number (FRN): 0024534505
Alphanumeric FCC ID: XPYLISAU200
Unique Application Identifier: hyRPS2xIVjw+wOc5LFl0fg==
Line one: u-blox AG
Line two: att. Giulio Comar
City: Thalwil
State: N/A
Country: Switzerland
Zip Code: Ch-8800

TCB Information
TCB Application Email Address: oliver.kneip@cetecom.com
TCB Scope: A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices

FCC ID
Grantee Code: XPY
Product Code: LISAU200

Person at the applicant's address to receive grant or for contact
Name: Giulio Comar
Title: Certification Manager
Telephone Number: +390402529400 Extension:
Fax Number: +390402529394
Email: giulio.comar@u-blox.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   JBP - Part 15 Class B Computing Device Peripheral
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 3.75G HSPA Wireless Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   CETECOM ICT Services GmbH
First Name:   Gerald
Last Name:   Schmidt
Telephone Number: 49-681-598-0 Extension:
Fax Number:  49-681-598-8775
E-mail:  tcb@cetecom.com

Grant Comments
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ezra Stein
Title of authorized signature: 

Form App # 5 (2013-12-12)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: u-blox AG
FCC Registration Number (FRN): 0024534505
Alphanumeric FCC ID: XPYLISAU200
Unique Application Identifier: k8gll/zgPOxjlSIXfOVmCw==
Line one: u-blox AG
Line two: att. Giulio Comar
City: Thalwil
State: N/A
Country: Switzerland
Zip Code: Ch-8800

TCB Information
TCB Application Email Address: francis.lima@cetecom.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: XPY
Product Code: LISAU200

Person at the applicant's address to receive grant or for contact
Name: Giulio Comar
Title: Certification Manager
Telephone Number: +390402529400 Extension:
Fax Number: +390402529394
Email: giulio.comar@u-blox.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 3.75G HSPA Wireless Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   CETECOM GmbH
First Name:   Rachid
Last Name:   Acharkaoui
Telephone Number: 49-2054-9519-250 Extension:
Fax Number:  49-2054-9519-964
E-mail:  rachid.acharkaoui@cetecom.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Permissive Change Class II Licensed Modular Transmitter. Output power listed is conducted. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Giulio Comar
Title of authorized signature: 

Form App # 6 (2012-02-03)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: u-blox AG
FCC Registration Number (FRN): 0024534505
Alphanumeric FCC ID: XPYLISAU200
Unique Application Identifier: mka/QOeS4d7b4gwntenUHQ==
Line one: u-blox AG
Line two: att. Giulio Comar
City: Thalwil
State: N/A
Country: Switzerland
Zip Code: Ch-8800

TCB Information
TCB Application Email Address: karin.silberhorn@cetecom.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: XPY
Product Code: LISAU200

Person at the applicant's address to receive grant or for contact
Name: Giulio Comar
Title: Certification Manager
Telephone Number: +390402529400 Extension:
Fax Number: +390402529394
Email: giulio.comar@u-blox.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   08/01/2012
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 3.75G HSPA Wireless Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Licensed Modular Transmitter. Output power listed is conducted. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ezra Stein
Title of authorized signature: 

Form App # 7 (2013-02-05)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: u-blox AG
FCC Registration Number (FRN): 0024534505
Alphanumeric FCC ID: XPYLISAU200
Unique Application Identifier: oXcVzLI8MewOWyvW3Z8oCQ==
Line one: u-blox AG
Line two: att. Giulio Comar
City: Thalwil
State: N/A
Country: Switzerland
Zip Code: Ch-8800

TCB Information
TCB Application Email Address: oliver.kneip@cetecom.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: XPY
Product Code: LISAU200

Person at the applicant's address to receive grant or for contact
Name: Giulio Comar
Title: Certification Manager
Telephone Number: +390402529400 Extension:
Fax Number: +390402529394
Email: giulio.comar@u-blox.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 3.75G HSPA Wireless Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   CETECOM ICT Services GmbH
First Name:   Gerald
Last Name:   Schmidt
Telephone Number: 49-681-598-0 Extension:
Fax Number:  49-681-598-8775
E-mail:  tcb@cetecom.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Permissive Change Class II Licensed Modular Transmitter. Output power listed is conducted. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E, 27. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ezra Stein
Title of authorized signature: 

Form App # 8 (2016-04-25)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: u-blox AG
FCC Registration Number (FRN): 0019077858
Alphanumeric FCC ID: XPYLISAU200
Unique Application Identifier: qmODKRIZwX8Wy6aCLAwgxA==
Line one: u-blox AG
Line two: att. Giulio Comar
City: Thalwil
State: N/A
Country: Switzerland
Zip Code: Ch-8800

TCB Information
TCB Application Email Address: vkerai@tuvam.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: XPY
Product Code: LISAU200

Person at the applicant's address to receive grant or for contact
Name: Giulio Comar
Title: Certification Manager
Telephone Number: +390402529400 Extension:
Fax Number: +390402529394
Email: giulio.comar@u-blox.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Cell Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   CETECOM GmbH
First Name:   Rachid
Last Name:   Acharkaoui
Telephone Number: 49-2054-9519-250 Extension:
Fax Number:  49-2054-9519-964
E-mail:  rachid.acharkaoui@cetecom.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
C2PC as described in this filing. Single Modular Approval. Power output listed is conducted. SAR compliance for body worn operating configurations must be restricted to maintain a minimum separation distance of 1.0 cm and contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for body-worn accessory is 1.49W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Giulio Comar
Title of authorized signature: 

Form App # 9 (2016-11-07)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: u-blox AG
FCC Registration Number (FRN): 0019077858
Alphanumeric FCC ID: XPYLISAU200
Unique Application Identifier: QuZ2HTCfd/dNRyacAGd4Zg==
Line one: u-blox AG
Line two: att. Giulio Comar
City: Thalwil
State: N/A
Country: Switzerland
Zip Code: Ch-8800

TCB Information
TCB Application Email Address: rcb.admin@at4wireless.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: XPY
Product Code: LISAU200

Person at the applicant's address to receive grant or for contact
Name: Giulio Comar
Title: Certification Manager
Telephone Number: +390402529400 Extension:
Fax Number: +390402529394
Email: giulio.comar@u-blox.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): LISAU200 for the 3M Offender host

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   AT4 wireless S.A.
First Name:   Francisco
Last Name:   Canas Escribano
Telephone Number: 34-9562-619100 Extension:
Fax Number:  34-9562-619113
E-mail:  fcanas@at4wireless.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Limited Modular approval limited to the host 3M Two-Piece GPS Offender Tracking Unit (V6). Antenna integrated. Ouput power is conducted. The highest reported SAR for head exposure conditions is 1.31 W/Kg. The highest reported SAR for body exposure conditions is 1.49 W/Kg. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Giulio Comar
Title of authorized signature:  Certification Manager

Complete items below if agent signs the application:

Firm Name:  AT4 wireless
Name:  Antonio Antonio Antonio
Line 1:  Antonio
Line 2:  Antonio
P.O. Box:  Antonio
City:  Antonio
State:  Antonio
Country:  Antonio
Zip Code:  Antonio
Telephone Number:  +34952619198
Fax Number:  +34952619113
E-mail:  aolivares@at4wireless.com

Form App # 10 (2019-09-09)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: u-blox AG
FCC Registration Number (FRN): 0019077858
Alphanumeric FCC ID: XPYLISAU200
Unique Application Identifier: sySr6b7NXCHIzq/8sTU9Xg==
Line one: Zuercherstrasse 68
City: Thalwil
State: N/A
Country: Switzerland
Zip Code: Ch-8800

TCB Information
TCB Application Email Address: hotline@acbcert.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27

FCC ID
Grantee Code: XPY
Product Code: LISAU200

Person at the applicant's address to receive grant or for contact
Name: Giulio Comar
Title: Certification Manager
Telephone Number: +390402529400 Extension:
Fax Number: +390402529394
Email: giulio.comar@u-blox.com

Technical Contact
Firm Name: u-blox
First Name: Giulio
Last Name: Comar
Country:
Switzerland
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   03/06/2020
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): UMTS/GSM data and voice module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   7layers GmbH
First Name:   Bernhard
Last Name:   Retka
Telephone Number: 0049 2102 749 452 Extension:
Fax Number:  0049 2102 749 350
E-mail:  Bernhard.Retka@7layers.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Permissive Change Class II Licensed Modular Transmitter. Output power listed is conducted. This device contains functions that are not operational in U.S Territories; this filing is only applicable for US Operations. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed as document in this filing, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. (Grant Note on 12/12/2013) This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change with some hardware modifications, as documented in this filing.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Roseelan Sathiyaseelan
Title of authorized signature: 

Form App # 11 (2012-02-03)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: u-blox AG
FCC Registration Number (FRN): 0024534505
Alphanumeric FCC ID: XPYLISAU200
Unique Application Identifier: Vgqlznbr7fPhwg1DZYOVSA==
Line one: u-blox AG
Line two: att. Giulio Comar
City: Thalwil
State: N/A
Country: Switzerland
Zip Code: Ch-8800

TCB Information
TCB Application Email Address: karin.silberhorn@cetecom.com
TCB Scope: A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices

FCC ID
Grantee Code: XPY
Product Code: LISAU200

Person at the applicant's address to receive grant or for contact
Name: Giulio Comar
Title: Certification Manager
Telephone Number: +390402529400 Extension:
Fax Number: +390402529394
Email: giulio.comar@u-blox.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   08/01/2012
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   JBP - Part 15 Class B Computing Device Peripheral
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 3.75G HSPA Wireless Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   CETECOM GmbH
First Name:   Rachid
Last Name:   Acharkaoui
Telephone Number: 49-2054-9519-250 Extension:
Fax Number:  49-2054-9519-964
E-mail:  rachid.acharkaoui@cetecom.com

Grant Comments
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ezra Stein
Title of authorized signature: 

Applications are submitted for FCC ID and Grant requests. Click an above application to view details


© FCCID.io 2025