FCC ID XPYMAYAW160
WLAN/Bluetooth host-based multiradio module MAYA W160
by u-blox AG
Grantee Code: XPY Product Code: MAYAW160
Latest application date: 2024-11-12
FCC ID Device Details
| FCC ID | XPYMAYAW160 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XPY |
| Product Code | MAYAW160 |
| Applicant Business | u-blox AG 🇨🇭 |
| Related Domains |  u-blox.com |
| Equipment Class | WLAN/Bluetooth host-based multiradio module MAYA W160 |
| Test Firm | 7layers GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-12 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-12 |
| 2402-2480 MHz | Original Equipment | 2022-11-24 |
| 5180-5240 MHz | Original Equipment | 2022-11-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| MAYA-W1_SIM_UBX-21010495 | Users Manual | 2024-11-12 | PDF 2 MB |
| MAYA-W1_SIM_UBX-21010495_r1 | Users Manual | 2022-11-24 | PDF 2 MB |
| MAYA-W1_Photos with W160 | Internal Photos | 2022-11-24 | PDF 403.4 KB |
| MAYA-W1_Photos with W160 | External Photos | 2022-11-24 | PDF 403.4 KB |
| MAYA-W1_Identifier marking | ID Label/Location Info | 2022-11-24 | PDF 106 KB |
| MAYA-W1 Block Diagram | Block Diagram | 2022-11-24 | PDF 152.9 KB |
| MDE_UBLOX_2110_FCC_Photo_Setups | Test Setup Photos | 2022-11-24 | PDF 1.1 MB |
| MDE_UBLOX_2404_FCC_03_rev01_w160 | Test Report | 2024-11-12 | PDF 2.1 MB |
| MDE_UBLOX_2404_FCC_04_rev01_w160 | Test Report | 2024-11-12 | PDF 2.5 MB |
| Cover_Letter -W160_v2 | Test Report | 2022-11-24 | PDF 478.2 KB |
| MAYA-W1 antennas_v2 | Test Report | 2022-11-24 | PDF 366.4 KB |
| MDE_UBLOX_2110_FCC_01_SIGNED_W161_2_4_Part1 | Test Report | 2022-11-24 | PDF 4.9 MB |
| MDE_UBLOX_2110_FCC_01_SIGNED_W161_2_4_Part2 | Test Report | 2022-11-24 | PDF 5 MB |
| MDE_UBLOX_2110_FCC_01_SIGNED_W161_2_4_Part3 | Test Report | 2022-11-24 | PDF 502 KB |
| MDE_UBLOX_2110_FCC_02_SIGNED_w161_5g_Part1 | Test Report | 2022-11-24 | PDF 5 MB |
| MDE_UBLOX_2110_FCC_02_SIGNED_w161_5g_Part2 | Test Report | 2022-11-24 | PDF 3.3 MB |
| MDE_UBLOX_2110_FCC_06_SIGNED_W160_15_247_RSE | Test Report | 2022-11-24 | PDF 1.6 MB |
| XPYMAYAW160 FCC Covered Equipment | Attestation Statements | 2024-11-12 | PDF 144 KB |
| XPYMAYAW160 U.S. Agent Designation | Attestation Statements | 2024-11-12 | PDF 65.9 KB |
| XPYMAYAW160 U.S. Agent Designation | Attestation Statements | 2024-11-12 | PDF 63.1 KB |
| ACB-FORM-FCC-Modular-Letter_w160_new | Cover Letter(s) | 2024-11-12 | PDF 299.8 KB |
| AS-146153-100-001 | Cover Letter(s) | 2024-11-12 | PDF 1.8 MB |
| ENG_DS_ANT-DB1-RAF_A | Cover Letter(s) | 2024-11-12 | PDF 3 MB |
| GW_59_3153-3137568 | Cover Letter(s) | 2024-11-12 | PDF 1.8 MB |
| MAYA-W160-00B_Confidentiality_Request | Cover Letter(s) | 2024-11-12 | PDF 86.3 KB |
| XPYMAYAW160_Application_Letter-FCC | Cover Letter(s) | 2024-11-12 | PDF 82.5 KB |
| XPYMAYAW160_Auth_Letter-FCC | Cover Letter(s) | 2024-11-12 | PDF 66.6 KB |
| u-blox_FCC_IC_signature_Authorization_Letter | Cover Letter(s) | 2024-11-12 | PDF 104.7 KB |
| ACB-FORM-FCC-Modular-Letter_W160 | Cover Letter(s) | 2022-11-24 | PDF 261.4 KB |
| Cover_Letter | Cover Letter(s) | 2022-11-24 | PDF 643.5 KB |
| MAYA-W160_Auth_Letter-FCC | Cover Letter(s) | 2022-11-24 | PDF 47.6 KB |
| MAYA-W160_Confidentiality_Request-FCC | Cover Letter(s) | 2022-11-24 | PDF 57.3 KB |
| MDE_UBLOX_2404_FCC_MPE_01_v2 | RF Exposure Info | 2024-11-12 | PDF 346.9 KB |
| MDE_UBLOX_2110_FCC_MPE_01_W160 | RF Exposure Info | 2022-11-24 | PDF 325.7 KB |
| Confidential_MAYA-W160_SCH_REV03 Metadata only | Schematics | PDF 740 KB | |
| Confidential_MAYA-W1 Operational Description_r2 Metadata only | Operational Description | PDF 240.9 KB | |
| Confidential_MAYA-W1 Operational Description_r4 Metadata only | Operational Description | PDF 338.1 KB | |
| Confidential_MAYA-W1_sw_sec_sw_config_desc Metadata only | Operational Description | PDF 127.2 KB | |
| Cover_Letter KDB 791877 Metadata only | Operational Description | PDF 643.5 KB | |
| FCC KDB Inquiry_KDB 791877 Metadata only | Operational Description | PDF 405.6 KB | |
| Final_Reply_From_FCC_KDB Metadata only | Operational Description | PDF 190.4 KB | |
| Final_Reply_From_FCC_KDB 791877 Metadata only | Operational Description | PDF 190.4 KB |
Application Information
| Application ID | In/Rgv7eheRZkFyqZtcyLA== |
|---|---|
| Final Action Date | 2024-11-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019077858 |
| Model | MAYAW160 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WLAN/Bluetooth host-based multiradio module MAYA W160 |
| Responsible Party | Giulio Comar, Certification Manager, giulio.comar@u-blox.com , +390402529400 |
| Agent | Patrick Patrick Patrick, 7layers GmbH, patrick.lomax@bureauveritas.com  , 011492102749318 |
| Test Firm | Bernhard Retka, 7layers GmbH, Bernhard.Retka@7layers.com  , 00492102749452 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (part numbers: ANT-DB1-RAF-RPS manufactured by Linx technologies, AS-146153-100-001 manufacturered by Molex and GW.59.3153 manufactured by Taoglas) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2.4 GHz WLAN/BT/BLE operational modes, has 20 MHz and 40 MHz bandwidth modes for the WLAN operational mode and it also contains a 5 GHz WLAN transmitter. C2PC: Alternate antennas, with the device operating on reduced RF output power as described in this filing, are added to the device granted on 24 November 2022. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| In/Rgv7eheRZkFyqZtcyLA== | 2024-11-12 | Class II permissive change or modification of presently authorized equipment |
| HVmskV3XHBcJnhXxZc7edw== | 2024-11-12 | Class II permissive change or modification of presently authorized equipment |
| vqSZGuZ/fV3MlolRQls5iQ== | 2022-11-24 | Original Equipment |
| c3TyQUoUo2eRRFxKAgu/qg== | 2022-11-24 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application vqSZGuZ/fV3MlolRQls5iQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/24/2022 Application Dated: 11/23/2022 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYMAYAW160 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module MAYA W160 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0065 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0692 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: ANT-DB1-RAF-RPS and ANT-2.4-CW-RCT-RP, manufactured by Linx technologies) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2.4GHz WLAN/BT/BLE figures and has 20 MHz and 40 MHz bandwidth modes for WLAN; and it also contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application vqSZGuZ/fV3MlolRQls5iQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 11/24/2022 Application Dated: 11/23/2022 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYMAYAW160 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module MAYA W160 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0065 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0692 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: ANT-DB1-RAF-RPS and ANT-2.4-CW-RCT-RP, manufactured by Linx technologies) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2.4GHz WLAN/BT/BLE figures and has 20 MHz and 40 MHz bandwidth modes for WLAN; and it also contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/12/2024 Application Dated: 11/11/2024 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYMAYAW160 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module MAYA W160 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0065 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0692 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (part numbers: ANT-DB1-RAF-RPS manufactured by Linx technologies, AS-146153-100-001 manufacturered by Molex and GW.59.3153 manufactured by Taoglas) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2.4 GHz WLAN/BT/BLE operational modes, has 20 MHz and 40 MHz bandwidth modes for the WLAN operational mode and it also contains a 5 GHz WLAN transmitter. C2PC: Alternate antennas, with the device operating on reduced RF output power as described in this filing, are added to the device granted on 24 November 2022. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application In/Rgv7eheRZkFyqZtcyLA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 11/12/2024 Application Dated: 11/11/2024 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYMAYAW160 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN/Bluetooth host-based multiradio module MAYA W160 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0065 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0692 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (part numbers: ANT-DB1-RAF-RPS manufactured by Linx technologies, AS-146153-100-001 manufacturered by Molex and GW.59.3153 manufactured by Taoglas) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2.4 GHz WLAN/BT/BLE operational modes, has 20 MHz and 40 MHz bandwidth modes for the WLAN operational mode and it also contains a 5 GHz WLAN transmitter. C2PC: Alternate antennas, with the device operating on reduced RF output power as described in this filing, are added to the device granted on 24 November 2022. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/12/2024 Application Dated: 11/11/2024 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYMAYAW160 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module MAYA W160 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0525 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0617 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0603 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (part numbers: ANT-DB1-RAF manufactured by Linx technologies, 146153-0100 manufacturered by Molex and GW.59.3153 manufactured by Taoglas) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes and it also contains 2.4 GHz WLAN/BT/BLE transmitters. C2PC: Alternate antennas, with the device operating on reduced RF output power as described in this filing, are added to the device granted on 24 November 2022. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application HVmskV3XHBcJnhXxZc7edw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 11/12/2024 Application Dated: 11/11/2024 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYMAYAW160 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module MAYA W160 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0525 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0617 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0603 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (part numbers: ANT-DB1-RAF manufactured by Linx technologies, 146153-0100 manufacturered by Molex and GW.59.3153 manufactured by Taoglas) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes and it also contains 2.4 GHz WLAN/BT/BLE transmitters. C2PC: Alternate antennas, with the device operating on reduced RF output power as described in this filing, are added to the device granted on 24 November 2022. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/24/2022 Application Dated: 11/23/2022 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYMAYAW160 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module MAYA W160 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0525 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0617 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0603 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: ANT-DB1-RAF-RPS and ANT-2.4-CW-RCT-RP, manufactured by Linx technologies) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application c3TyQUoUo2eRRFxKAgu/qg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 11/24/2022 Application Dated: 11/23/2022 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYMAYAW160 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN/Bluetooth host-based multiradio module MAYA W160 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0525 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0617 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0603 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: ANT-DB1-RAF-RPS and ANT-2.4-CW-RCT-RP, manufactured by Linx technologies) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |