FCC ID XPYMAYAW4A

Host-based multi-radio modules with Wi-Fi 6, Bluetooth Low Energy 5.4 and 802.15.4

by u-blox AG

Grantee Code: XPY   Product Code: MAYAW4A
Latest application date: 2026-09-08

FCC ID Device Details

FCC IDXPYMAYAW4A
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXPY
Product CodeMAYAW4A
Applicant Businessu-blox AG 🇨🇭
Related Domains u-blox.com approve-it.net
Equipment ClassHost-based multi-radio modules with Wi-Fi 6, Bluetooth Low Energy 5.4 and 802.15.4
Test FirmSporton International Inc. Hsinhua Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2026-09-08
5845-5885 MHzClass II permissive change or modification of presently authorized equipment2026-09-08
5845-5885 MHzOriginal Equipment2025-01-27
2412-2462 MHzOriginal Equipment2025-01-27

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2026-09-08PDF 2.1 MB
User ManualUsers Manual2025-01-27PDF 1.9 MB
Internal PhotosInternal Photos2026-09-08PDF 1.2 MB
Internal PhotosInternal Photos2025-01-27PDF 1 MB
External PhotosExternal Photos2026-09-08PDF 1.1 MB
External PhotosExternal Photos2025-01-27PDF 970.8 KB
LabelID Label/Location Info2025-01-27PDF 284.2 KB
Block DiagramBlock Diagram2025-01-27PDF 109.7 KB
TSUP 802.15.4Test Setup Photos2026-09-08PDF 2 MB
TSUP BLETest Setup Photos2026-09-08PDF 2 MB
TSUP DFSTest Setup Photos2026-09-08PDF 273.2 KB
TSUP WLAN 2.4GTest Setup Photos2026-09-08PDF 2 MB
TSUP 5G UNII1-4Test Setup Photos2025-01-27PDF 1.7 MB
TSUP BLE 15.247Test Setup Photos2025-01-27PDF 1.7 MB
TSUP DFSTest Setup Photos2025-01-27PDF 272.4 KB
TSUP WLAN 2.4GTest Setup Photos2025-01-27PDF 1.7 MB
TSUP ZigbeeTest Setup Photos2025-01-27PDF 1.7 MB
MPE Test ReportRF Exposure Info2026-09-08PDF 392.1 KB
Test Report 802.15.4Test Report2026-09-08PDF 3.6 MB
Test Report BLETest Report2026-09-08PDF 4.3 MB
Test Report DFSTest Report2026-09-08PDF 677.9 KB
Test Report WLAN 2.4GTest Report2026-09-08PDF 5.1 MB
Test Report WLAN 5GTest Report2026-09-08PDF 303.8 KB
Ant. Rep. 206 2047H2B1PD1A1C385LTest Report2025-01-27PDF 2.6 MB
Ant. Rep. 206 2047H2B1PD1A1C385LTest Report2025-01-27PDF 962.7 KB
Ant. Rep. 207 AS-146153-100-001Test Report2025-01-27PDF 1,005.4 KB
Ant. Rep. 208 2042810100-ASTest Report2025-01-27PDF 3 MB
Ant. Rep. 2458-02-smr 0273113Test Report2025-01-27PDF 1.6 MB
Ant. Rep. 3153-3137568Test Report2025-01-27PDF 1.8 MB
Ant. Rep. A1-3199239Test Report2025-01-27PDF 2.6 MB
Ant. Rep. ANT-DB1-RAF ATest Report2025-01-27PDF 3 MB
Ant. Rep. Trace Ant Data SheetTest Report2025-01-27PDF 223.9 KB
Ant. Rep. WTS 2450 080114-3045795Test Report2025-01-27PDF 962.7 KB
Test Report 5G UNII1-1Test Report2025-01-27PDF 5.5 MB
Test Report BLE 15.247Test Report2025-01-27PDF 4.2 MB
Test Report DFSTest Report2025-01-27PDF 848.1 KB
Test Report WLAN 2.4GTest Report2025-01-27PDF 4.8 MB
Test Report ZigbeeTest Report2025-01-27PDF 4 MB
Attestation Statement part 2.911(d)(7)Attestation Statements2026-09-08PDF 352.6 KB
Attstn Stmts parts 2.911(d)(5)(i)&(ii)Attestation Statements2026-09-08PDF 146.6 KB
Attestation Statement 5.9GAttestation Statements2025-01-27PDF 84.1 KB
Attestation Statement part 2.911(d)(7)Attestation Statements2025-01-27PDF 62.8 KB
Attstn Stmt Part 2.911(d)(5)(i)&(ii)Attestation Statements2025-01-27PDF 63.6 KB
Attstn Stmt part 2.911(d)(5)(i)&(ii)Attestation Statements2025-01-27PDF 63.6 KB
Updated Attestation Statements Part 2.911(d)(7)Attestation Statements2025-01-27PDF 345.8 KB
C2PC LetterCover Letter(s)2026-09-08PDF 127.5 KB
Condfidentiality Request LetterCover Letter(s)2026-09-08PDF 128.9 KB
Confidentiality Request LetterCover Letter(s)2026-09-08PDF 128.9 KB
LOACover Letter(s)2026-09-08PDF 133.1 KB
Authorization from GiulioCover Letter(s)2025-01-27PDF 106.7 KB
Confidentiality LetterCover Letter(s)2025-01-27PDF 130.4 KB
LOA LetterCover Letter(s)2025-01-27PDF 126.7 KB
Modular Approval LetterCover Letter(s)2025-01-27PDF 135 KB
Product VariantsCover Letter(s)2025-01-27PDF 116.7 KB
RF Exposure MPERF Exposure Info2025-01-27PDF 336.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 222.8 KB
Schematics Metadata onlySchematicsPDF 87.4 KB
Schematics MAYA-W473-10B Metadata onlySchematicsPDF 820.3 KB
Schematics MAYA-W476-10B Metadata onlySchematicsPDF 860.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 474.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 493.4 KB
Op Desc Software Security Metadata onlySDR Software/Security Info.PDF 98.3 KB
Op Desc Software Security Control Metadata onlySDR Software/Security Info.PDF 222.4 KB

Application Information

Application IDve914UOEtTz+XPoZR+ojGg==
Final Action Date2026-09-08
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019077858
ModelMAYAW4A
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionHost-based multi-radio modules with Wi-Fi 6, Bluetooth Low Energy 5.4 and 802.15.4
Responsible PartyFilip Kruzela, filip.kruzela@u-blox.com , +46733207170
Non-Technical ContactNathan Grinager, Approve-IT, Inc., team@approve-it.net , 651-247-1678
Test FirmAlex Chen, Sporton International Inc. Hsinhua Laboratory, alex@sporton.com.tw , 886-3-327-3456
TCB Emailcb@industrial-ia.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
ve914UOEtTz+XPoZR+ojGg==2026-09-08Class II permissive change or modification of presently authorized equipment
bBFY8NWGZk1DsRoGKY7Row==2026-09-08Class II permissive change or modification of presently authorized equipment
JNlkg+INUTCijNDxrMCfJw==2025-01-27Original Equipment
I+CSQwJIpEAsAuv6bY4uVQ==2025-01-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.017915CCC
2405-2480 MHz0.018815CCC
2412-2462 MHz0.11115CCC
5180-5240 MHz0.159615ECC
5260-5320 MHz0.130915ECC
5500-5720 MHz0.036815ECC
5745-5825 MHz0.038415ECC
5845-5885 MHz0.161415ECC, EP

Grants

TCB Grant - Application ve914UOEtTz+XPoZR+ojGg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 09/08/2026

Application Dated: 09/04/2026
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Filip Kruzela , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYMAYAW4A
Name of Grantee:  u-blox AG
Equipment Class: Digital Transmission System
Notes: Host-based multi-radio modules with Wi-Fi 6, Bluetooth Low Energy 5.4 and 802.15.4
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0179  
CC 15C 2405.0  -  2480.0 0.0188  
CC 15C 2412.0  -  2462.0 0.111  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 MHz modes.

Class II Permissive Change: Introduces variant devices that include an External Antenna u.FL connector, two antenna pins, and other component changes as described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application JNlkg+INUTCijNDxrMCfJw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 01/27/2025

Application Dated: 01/27/2025
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYMAYAW4A
Name of Grantee:  u-blox AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Host-based multi-radio modules with Wi-Fi 6, Bluetooth Low Energy 5.4 and 802.15.4
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.1596  
CC 15E 5260.0  -  5320.0 0.1309  
CC 15E 5500.0  -  5720.0 0.0368  
CC 15E 5745.0  -  5825.0 0.0384  
CC EP 15E 5845.0  -  5885.0 0.1614  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 MHz modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)

EAS Grant - Application JNlkg+INUTCijNDxrMCfJw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 01/27/2025

Application Dated: 01/27/2025
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYMAYAW4A
Name of Grantee:  u-blox AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Host-based multi-radio modules with Wi-Fi 6, Bluetooth Low Energy 5.4 and 802.15.4
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.1596  
CC 15E 5260.0  -  5320.0 0.1309  
CC 15E 5500.0  -  5720.0 0.0368  
CC 15E 5745.0  -  5825.0 0.0384  
CC EP 15E 5845.0  -  5885.0 0.1614  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 MHz modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)

TCB Grant - Application I+CSQwJIpEAsAuv6bY4uVQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 01/27/2025

Application Dated: 01/27/2025
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYMAYAW4A
Name of Grantee:  u-blox AG
Equipment Class: Digital Transmission System
Notes: Host-based multi-radio modules with Wi-Fi 6, Bluetooth Low Energy 5.4 and 802.15.4
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0179  
CC 15C 2405.0  -  2480.0 0.0188  
CC 15C 2412.0  -  2462.0 0.111  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 MHz modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application I+CSQwJIpEAsAuv6bY4uVQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 01/27/2025

Application Dated: 01/27/2025
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYMAYAW4A
Name of Grantee:  u-blox AG
Equipment Class: Digital Transmission System
Notes: Host-based multi-radio modules with Wi-Fi 6, Bluetooth Low Energy 5.4 and 802.15.4
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0179  
CC 15C 2405.0  -  2480.0 0.0188  
CC 15C 2412.0  -  2462.0 0.111  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 MHz modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application bBFY8NWGZk1DsRoGKY7Row==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 09/08/2026

Application Dated: 09/04/2026
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Filip Kruzela , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYMAYAW4A
Name of Grantee:  u-blox AG
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Host-based multi-radio modules with Wi-Fi 6, Bluetooth Low Energy 5.4 and 802.15.4
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.1596  
CC 15E 5260.0  -  5320.0 0.1309  
CC 15E 5500.0  -  5720.0 0.0368  
CC 15E 5745.0  -  5825.0 0.0384  
CC EP 15E 5845.0  -  5885.0 0.1614  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 MHz modes.

Class II Permissive Change: Introduces variant devices that include an External Antenna u.FL connector, two antenna pins, and other component changes as described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)