FCC ID XPYNINAB30
Wireless Communication System Module
by u-blox AG
Grantee Code: XPY Product Code: NINAB30
Latest application date: 2021-08-20
FCC ID Device Details
| FCC ID | XPYNINAB30 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XPY |
| Product Code | NINAB30 |
| Applicant Business | u-blox AG 🇨🇭 |
| Related Domains |  u-blox.com |
| Equipment Class | Wireless Communication System Module |
| Test Firm | UL Verification Services Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-10-16 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-03-20 |
| 2402-2480 MHz | Original Equipment | 2018-09-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2018-09-11 | PDF 1.7 MB |
| Internal photos | Internal Photos | 2020-04-14 | PDF 650.4 KB |
| Int photos | Internal Photos | 2018-09-11 | PDF 241.1 KB |
| External photos | External Photos | 2020-04-14 | PDF 1,009.1 KB |
| ext photos | External Photos | 2019-03-20 | PDF 760.8 KB |
| ext photos | External Photos | 2018-09-11 | PDF 1.6 MB |
| Label and Location | ID Label/Location Info | 2018-09-11 | PDF 141.3 KB |
| block Diagram | Block Diagram | 2018-09-11 | PDF 54.7 KB |
| operational description | Operational Description | 2019-03-20 | PDF 52.2 KB |
| operational description | Operational Description | 2018-09-11 | PDF 65.6 KB |
| Test setup photos | Test Setup Photos | 2020-04-14 | PDF 555 KB |
| test setup photos | Test Setup Photos | 2019-03-20 | PDF 902.3 KB |
| test setup photos | Test Setup Photos | 2018-09-11 | PDF 1.8 MB |
| Test report (DTS-BT LE) rev2 | Test Report | 2019-10-16 | PDF 986.9 KB |
| Test report | Test Report | 2019-03-20 | PDF 580.1 KB |
| Test Report 802.15.4 | Test Report | 2018-09-11 | PDF 1.4 MB |
| test report BLE | Test Report | 2018-09-11 | PDF 1.6 MB |
| test report_Propriatary | Test Report | 2018-09-11 | PDF 1.5 MB |
| Letter of Attestation Referencing Test Data | Cover Letter(s) | 2019-03-20 | PDF 48.5 KB |
| FCC agent auth letter (UL Verification Services Inc.) | Cover Letter(s) | 2021-08-20 | PDF 47.8 KB |
| NINA-B30_C2PC_Letter | Cover Letter(s) | 2021-08-20 | PDF 123.2 KB |
| u-blox_FCC_IC_signature_Authorization_Letter | Cover Letter(s) | 2021-08-20 | PDF 104.7 KB |
| Agent Authorization | Cover Letter(s) | 2019-10-16 | PDF 151 KB |
| Confidentiality Request (Long term & Short term) | Cover Letter(s) | 2019-10-16 | PDF 346 KB |
| Description of Change_rev | Cover Letter(s) | 2019-10-16 | PDF 285.2 KB |
| C2PC letter | Cover Letter(s) | 2019-03-20 | PDF 37.6 KB |
| Family Declaration | Cover Letter(s) | 2019-03-20 | PDF 354.8 KB |
| PoA | Cover Letter(s) | 2019-03-20 | PDF 111.5 KB |
| LTC Request | Cover Letter(s) | 2018-09-11 | PDF 41.9 KB |
| Request Modular Approval | Cover Letter(s) | 2018-09-11 | PDF 47.5 KB |
| 13714278-E1V1 FCC Report RF EXPOSURE Final | RF Exposure Info | 2021-08-20 | PDF 191.4 KB |
| RF Exposure Info (MPE)_rev | RF Exposure Info | 2019-10-16 | PDF 403.6 KB |
| Antenna Connector Ref Design Metadata only | Schematics | PDF 594.2 KB | |
| schematics Metadata only | Schematics | PDF 107.7 KB | |
| Operational Description-Antenna and layout Metadata only | Operational Description | PDF 211.4 KB | |
| Operational Description-module driver board trace change description rev Metadata only | Operational Description | PDF 818.4 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 25.2 KB |
Application Information
| Application ID | Hp4ni+L9B6D4mD8jlAN4dA== |
|---|---|
| Final Action Date | 2021-08-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019077858 |
| Model | NINAB30 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless Communication System Module |
| Responsible Party | Giulio Comar, Certification Manager, giulio.comar@u-blox.com , +390402529400 |
| Technical Contact | Grace Rincand, UL Verification Services Inc., grace.rincand@ul.com  , 510-771-1000 |
| Test Firm | Jay Kogoma, UL Verification Services Inc., jay.kogoma@ul.com , 510 319 4135 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to allow use in portable hosts with no minimum separation distance from persons, removing the 10mm separation distance detailed in the original grant conditions. 03/20/2019: Class II Permissive Change adds dedicated integrated PCB trace antenna. 09/11/2018 Original grant conditions: Output power listed is max peak conducted. The integration of this modular approved transmitter in this Open CPU version into any end-product is strictly limited to the grantee himself. Integration by any other party than the grantee requires first a change in identification filing according to §2.933. This modular transmitter is approved for use in fixed/mobile configurations and meets SAR test exclusion for host applications, where the radiating part is at least 10 mm away from the human body. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is also approved with a fixed onboard antenna. Only those antenna(s) tested and documented with this device or similar antenna types with equal or lesser gain and identical in- and out-band characteristics may be used with this transmitter. The antenna used for this transmitter module must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The integrator is responsible for the final compliance of the end-product with the integrated transmitter module. When the conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application for equipment authorization. This device supports Bluetooth BLE 5 with different data rates (1 MBit/s, 2 MBit/s, 500 kBit/s, 125 kBit/s), IEEE 802.15.4 and a 2.4 GHz proprietary mode as documented. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Hp4ni+L9B6D4mD8jlAN4dA== | 2021-08-20 | Class II permissive change or modification of presently authorized equipment |
| DyXwqBSdnrIoXlt6pU78/g== | 2019-10-16 | Class II permissive change or modification of presently authorized equipment |
| lXhif6kDZbidnRcekQ9+fA== | 2019-03-20 | Class II permissive change or modification of presently authorized equipment |
| vCz8ia8SDeaDoS//WxeW9A== | 2018-09-11 | Original Equipment |
Grants
TCB Grant - Application vCz8ia8SDeaDoS//WxeW9A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 09/11/2018 Application Dated: 09/11/2018 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYNINAB30 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 | |||
| 15C | 2405.0 - 2475.0 | 0.007 |
| Output power listed is max peak conducted. The integration of this modular approved transmitter in this Open CPU version into any end-product is strictly limited to the grantee himself. Integration by any other party than the grantee requires first a change in identification filing according to §2.933. This modular transmitter is approved for use in fixed/mobile configurations and meets SAR test exclusion for host applications, where the radiating part is at least 10 mm away from the human body. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is also approved with a fixed onboard antenna. Only those antenna(s) tested and documented with this device or similar antenna types with equal or lesser gain and identical in- and out-band characteristics may be used with this transmitter. The antenna used for this transmitter module must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The integrator is responsible for the final compliance of the end-product with the integrated transmitter module. When the conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application for equipment authorization. This device supports Bluetooth BLE 5 with different data rates (1 MBit/s, 2 MBit/s, 500 kBit/s, 125 kBit/s), IEEE 802.15.4 and a 2.4 GHz propriatery mode as documented. |
EAS Grant - Application vCz8ia8SDeaDoS//WxeW9A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 09/11/2018 Application Dated: 09/11/2018 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYNINAB30 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 | |||
| 15C | 2405.0 - 2475.0 | 0.007 |
| Output power listed is max peak conducted. The integration of this modular approved transmitter in this Open CPU version into any end-product is strictly limited to the grantee himself. Integration by any other party than the grantee requires first a change in identification filing according to §2.933. This modular transmitter is approved for use in fixed/mobile configurations and meets SAR test exclusion for host applications, where the radiating part is at least 10 mm away from the human body. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is also approved with a fixed onboard antenna. Only those antenna(s) tested and documented with this device or similar antenna types with equal or lesser gain and identical in- and out-band characteristics may be used with this transmitter. The antenna used for this transmitter module must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The integrator is responsible for the final compliance of the end-product with the integrated transmitter module. When the conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application for equipment authorization. This device supports Bluetooth BLE 5 with different data rates (1 MBit/s, 2 MBit/s, 500 kBit/s, 125 kBit/s), IEEE 802.15.4 and a 2.4 GHz propriatery mode as documented. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 03/20/2019 Application Dated: 03/20/2019 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYNINAB30 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 | |||
| 15C | 2405.0 - 2475.0 | 0.007 |
| Class II Permissive Change adds dedicated integrated PCB trace antenna as documented in this filing. Output power listed is max peak conducted. The integration of this modular approved transmitter in this Open CPU version into any end-product is strictly limited to the grantee himself. Integration by any other party than the grantee requires first a change in identification filing according to §2.933. This modular transmitter is approved for use in fixed/mobile configurations and meets SAR test exclusion for host applications, where the radiating part is at least 10 mm away from the human body. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is also approved with a fixed onboard antenna. Only those antenna(s) tested and documented with this device or similar antenna types with equal or lesser gain and identical in- and out-band characteristics may be used with this transmitter. The antenna used for this transmitter module must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The integrator is responsible for the final compliance of the end-product with the integrated transmitter module. When the conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application for equipment authorization. This device supports Bluetooth BLE 5 with different data rates (1 MBit/s, 2 MBit/s, 500 kBit/s, 125 kBit/s), IEEE 802.15.4 and a 2.4 GHz propriatery mode as documented. |
EAS Grant - Application lXhif6kDZbidnRcekQ9+fA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 03/20/2019 Application Dated: 03/20/2019 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYNINAB30 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 | |||
| 15C | 2405.0 - 2475.0 | 0.007 |
| Class II Permissive Change adds dedicated integrated PCB trace antenna as documented in this filing. Output power listed is max peak conducted. The integration of this modular approved transmitter in this Open CPU version into any end-product is strictly limited to the grantee himself. Integration by any other party than the grantee requires first a change in identification filing according to §2.933. This modular transmitter is approved for use in fixed/mobile configurations and meets SAR test exclusion for host applications, where the radiating part is at least 10 mm away from the human body. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is also approved with a fixed onboard antenna. Only those antenna(s) tested and documented with this device or similar antenna types with equal or lesser gain and identical in- and out-band characteristics may be used with this transmitter. The antenna used for this transmitter module must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The integrator is responsible for the final compliance of the end-product with the integrated transmitter module. When the conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application for equipment authorization. This device supports Bluetooth BLE 5 with different data rates (1 MBit/s, 2 MBit/s, 500 kBit/s, 125 kBit/s), IEEE 802.15.4 and a 2.4 GHz propriatery mode as documented. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/20/2021 Application Dated: 08/17/2021 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYNINAB30 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 | |||
| 15C | 2405.0 - 2475.0 | 0.007 |
| Class II Permissive Change to allow use in portable hosts with no minimum separation distance from persons, removing the 10mm separation distance detailed in the original grant conditions. 03/20/2019: Class II Permissive Change adds dedicated integrated PCB trace antenna. 09/11/2018 Original grant conditions: Output power listed is max peak conducted. The integration of this modular approved transmitter in this Open CPU version into any end-product is strictly limited to the grantee himself. Integration by any other party than the grantee requires first a change in identification filing according to §2.933. This modular transmitter is approved for use in fixed/mobile configurations and meets SAR test exclusion for host applications, where the radiating part is at least 10 mm away from the human body. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is also approved with a fixed onboard antenna. Only those antenna(s) tested and documented with this device or similar antenna types with equal or lesser gain and identical in- and out-band characteristics may be used with this transmitter. The antenna used for this transmitter module must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The integrator is responsible for the final compliance of the end-product with the integrated transmitter module. When the conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application for equipment authorization. This device supports Bluetooth BLE 5 with different data rates (1 MBit/s, 2 MBit/s, 500 kBit/s, 125 kBit/s), IEEE 802.15.4 and a 2.4 GHz proprietary mode as documented. |
EAS Grant - Application Hp4ni+L9B6D4mD8jlAN4dA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 08/20/2021 Application Dated: 08/17/2021 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYNINAB30 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication System Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 | |||
| 15C | 2405.0 - 2475.0 | 0.007 |
| Class II Permissive Change to allow use in portable hosts with no minimum separation distance from persons, removing the 10mm separation distance detailed in the original grant conditions. 03/20/2019: Class II Permissive Change adds dedicated integrated PCB trace antenna. 09/11/2018 Original grant conditions: Output power listed is max peak conducted. The integration of this modular approved transmitter in this Open CPU version into any end-product is strictly limited to the grantee himself. Integration by any other party than the grantee requires first a change in identification filing according to §2.933. This modular transmitter is approved for use in fixed/mobile configurations and meets SAR test exclusion for host applications, where the radiating part is at least 10 mm away from the human body. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is also approved with a fixed onboard antenna. Only those antenna(s) tested and documented with this device or similar antenna types with equal or lesser gain and identical in- and out-band characteristics may be used with this transmitter. The antenna used for this transmitter module must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The integrator is responsible for the final compliance of the end-product with the integrated transmitter module. When the conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application for equipment authorization. This device supports Bluetooth BLE 5 with different data rates (1 MBit/s, 2 MBit/s, 500 kBit/s, 125 kBit/s), IEEE 802.15.4 and a 2.4 GHz proprietary mode as documented. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 10/16/2019 Application Dated: 10/16/2019 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYNINAB30 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Stand-alone radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 | |||
| 15C | 2405.0 - 2475.0 | 0.007 |
| Class II Permissive Change to add support for a new antenna with a new antenna trace layout design, including co-transmission with an LTE module (FCC ID: XPY2AGQN4NNN) as described in this filing. Output power listed is max peak conducted. The integration of this modular approved transmitter in this Open CPU version into any end-product is strictly limited to the grantee himself. Integration by any other party than the grantee requires first a change in identification filing according to §2.933. This modular transmitter is approved for use in fixed/mobile configurations and meets SAR test exclusion for host applications, where the radiating part is at least 10 mm away from the human body. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is also approved with a fixed onboard antenna. Only those antenna(s) tested and documented with this device or similar antenna types with equal or lesser gain and identical in- and out-band characteristics may be used with this transmitter. The antenna used for this transmitter module must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The integrator is responsible for the final compliance of the end-product with the integrated transmitter module. When the conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application for equipment authorization. This device supports Bluetooth BLE 5 with different data rates (1 MBit/s, 2 MBit/s, 500 kBit/s, 125 kBit/s), IEEE 802.15.4 and a 2.4 GHz propriatery mode as documented. |
EAS Grant - Application DyXwqBSdnrIoXlt6pU78/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 10/16/2019 Application Dated: 10/16/2019 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYNINAB30 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Digital Transmission System |
| Notes: | Stand-alone radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 | |||
| 15C | 2405.0 - 2475.0 | 0.007 |
| Class II Permissive Change to add support for a new antenna with a new antenna trace layout design, including co-transmission with an LTE module (FCC ID: XPY2AGQN4NNN) as described in this filing. Output power listed is max peak conducted. The integration of this modular approved transmitter in this Open CPU version into any end-product is strictly limited to the grantee himself. Integration by any other party than the grantee requires first a change in identification filing according to §2.933. This modular transmitter is approved for use in fixed/mobile configurations and meets SAR test exclusion for host applications, where the radiating part is at least 10 mm away from the human body. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is also approved with a fixed onboard antenna. Only those antenna(s) tested and documented with this device or similar antenna types with equal or lesser gain and identical in- and out-band characteristics may be used with this transmitter. The antenna used for this transmitter module must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The integrator is responsible for the final compliance of the end-product with the integrated transmitter module. When the conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application for equipment authorization. This device supports Bluetooth BLE 5 with different data rates (1 MBit/s, 2 MBit/s, 500 kBit/s, 125 kBit/s), IEEE 802.15.4 and a 2.4 GHz propriatery mode as documented. |
| Mail To: |