1. FCC ID
  2. XPY
  3. XPYSARAG350

FCC ID XPYSARAG350

GSM/GPRS Module

by u-blox AG

Grantee Code: XPY   Product Code: SARAG350
Latest application date: 2015-08-13

FCC ID Device Details

FCC IDXPYSARAG350
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXPY
Product CodeSARAG350
Applicant Businessu-blox AG 🇨🇭
Related Domains u-blox.com
Equipment ClassGSM/GPRS Module
Test FirmCompliance Certification Services Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2015-08-13
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2013-08-28
824.2-848.8 MHzOriginal Equipment2013-04-26

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2014-02-24PDF 3.6 MB
Users_manualUsers Manual2013-10-23PDF 2 MB
Internal photosInternal Photos2014-02-24PDF 204.4 KB
Internal_photographsInternal Photos2013-10-23PDF 100.5 KB
External photosExternal Photos2014-02-24PDF 197.9 KB
External_photographsExternal Photos2013-10-23PDF 155.4 KB
LabelID Label/Location Info2013-08-28PDF 192.8 KB
Label_locationID Label/Location Info2013-04-26PDF 199.6 KB
SAR Test Setup PhotosTest Setup Photos2015-08-13PDF 385.4 KB
Test setup photosTest Setup Photos2014-02-24PDF 513 KB
Test setup photosTest Setup Photos2014-02-24PDF 124.3 KB
Part 22_24 test setup photographsTest Setup Photos2013-10-23PDF 130.3 KB
Part15B test setup photographsTest Setup Photos2013-10-23PDF 540.4 KB
Test reportTest Report2013-08-28PDF 555 KB
Test reportTest Report2013-08-28PDF 624.4 KB
Part 22_24 test reportTest Report2013-04-26PDF 632.1 KB
Part15B test reportTest Report2013-04-26PDF 450.2 KB
Agents LetterCover Letter(s)2015-08-13PDF 154.6 KB
C2PC LetterCover Letter(s)2015-08-13PDF 139.9 KB
Test Data LetterCover Letter(s)2015-08-13PDF 175.2 KB
FCC-C2PC_LetterCover Letter(s)2013-08-28PDF 122 KB
FCC_Modular_Approval_LetterCover Letter(s)2013-08-28PDF 140.7 KB
FCC_Permanent_Confidentiality_LetterCover Letter(s)2013-08-28PDF 143.6 KB
FCC_Short-term_Confidentiality_RequestCover Letter(s)2013-08-28PDF 147.4 KB
Exhibit 13_FCC_Permanent _Confidentiality_LetterCover Letter(s)2013-04-26PDF 145.4 KB
Exhibit 13_FCC_Short_Term_Confidentiality_RequestCover Letter(s)2013-04-26PDF 131.9 KB
FCC_IC_Agent_letterCover Letter(s)2013-04-26PDF 138.2 KB
FCC_Modular_Approval_LetterCover Letter(s)2013-04-26PDF 147.2 KB
RF Exposure ReportRF Exposure Info2015-08-13PDF 4.1 MB
Tune UpParts List/Tune Up Info2015-08-13PDF 330.4 KB
RF exposure info.RF Exposure Info2013-08-28PDF 633.8 KB
RF-ExposureRF Exposure Info2013-04-26PDF 597.2 KB

Application Information

Application IDE5qw76TSDjXXa6aCFC0uZA==
Final Action Date2015-08-13
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019077858
ModelSARAG350
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionGSM/GPRS Module
Responsible PartyGiulio Comar, Certification Manager, giulio.comar@u-blox.com , +390402529400
Test FirmRick Yeo, Compliance Certification Services Inc., Rick.yeo@sgs.com , 886-2-22170894
TCB EmailVKerai@tuvam.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 8.39 dBi for 850MHz bands and 3.11 dBi for 1900 MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. C2PC as described in this filing. SAR was evaluated in specific host model: TSONE, with specific antenna(s) as described in this filing. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1.5 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body and simultaneous transmission use conditions are 1.40 W/kg and 1.55 W/kg respectively.

Applications

Application IDDatePurpose
E5qw76TSDjXXa6aCFC0uZA==2015-08-13Class II permissive change or modification of presently authorized equipment
QDt1rKXArVveglTHi+lOPQ==2013-08-28Class II permissive change or modification of presently authorized equipment
9XnMMlSw+mE4LKE8Go+q/Q==2013-08-28Class II permissive change or modification of presently authorized equipment
YSKNQGHw8HD4+3faq/ekWA==2013-04-26Original Equipment
RSpokisYz2uRpFDAA6K/vQ==2013-04-26Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz1.662.5ppm254KGXW22H
824.2-848.8 MHz0.4452.5ppm249KGXW22H
1850.2-1909.8 MHz0.9772.5ppm251KGXW24E
1850.2-1909.8 MHz0.2622.5ppm249KGXW24E

Grants

TCB Grant - Application YSKNQGHw8HD4+3faq/ekWA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom 		Date of Grant: 04/26/2013

Application Dated: 04/26/2013
u-blox AG
u-blox AG
att. Giulio Comar
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYSARAG350
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: Quad band (GSM850, GSM 900, DCS 1800, PCS 1900) GSM/GPRS module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.66 2.5  PM 254KGXW
22H 824.2  -  848.8 0.445 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.977 2.5  PM 251KGXW
24E 1850.2  -  1909.8 0.262 2.5  PM 249KGXW

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 8.39 dBi for 850MHz bands and 3.11 dBi for 1900 MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

EAS Grant - Application YSKNQGHw8HD4+3faq/ekWA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

u-blox AG
u-blox AG att. Giulio Comar
Thalwil, Ch-8800
Switzerland 		  Date of Grant: 04/26/2013

Application Dated: 04/26/2013
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYSARAG350
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: Quad band (GSM850, GSM 900, DCS 1800, PCS 1900) GSM/GPRS module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.66 2.5  PM 254KGXW
22H 824.2  -  848.8 0.445 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.977 2.5  PM 251KGXW
24E 1850.2  -  1909.8 0.262 2.5  PM 249KGXW

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 8.39 dBi for 850MHz bands and 3.11 dBi for 1900 MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.



TCB Grant - Application RSpokisYz2uRpFDAA6K/vQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom 		Date of Grant: 04/26/2013

Application Dated: 04/26/2013
u-blox AG
u-blox AG
att. Giulio Comar
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYSARAG350
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Quad band (GSM850, GSM 900, DCS 1800, PCS 1900) GSM/GPRS module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  - 


EAS Grant - Application RSpokisYz2uRpFDAA6K/vQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

u-blox AG
u-blox AG att. Giulio Comar
Thalwil, Ch-8800
Switzerland 		  Date of Grant: 04/26/2013

Application Dated: 04/26/2013
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYSARAG350
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Quad band (GSM850, GSM 900, DCS 1800, PCS 1900) GSM/GPRS module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  - 



TCB Grant - Application QDt1rKXArVveglTHi+lOPQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom 		Date of Grant: 08/28/2013

Application Dated: 08/28/2013
u-blox AG
u-blox AG
att. Giulio Comar
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYSARAG350
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Quad band (GSM850, GSM 900, DCS 1800, PCS 1900) GSM/GPRS transmitter module.
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  - 

Class II Permissive Change as described in this filing. Single Modular Approval.

EAS Grant - Application QDt1rKXArVveglTHi+lOPQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

u-blox AG
u-blox AG att. Giulio Comar
Thalwil, Ch-8800
Switzerland 		  Date of Grant: 08/28/2013

Application Dated: 08/28/2013
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYSARAG350
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Quad band (GSM850, GSM 900, DCS 1800, PCS 1900) GSM/GPRS transmitter module.
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  - 

Class II Permissive Change as described in this filing. Single Modular Approval.



TCB Grant - Application E5qw76TSDjXXa6aCFC0uZA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom 		Date of Grant: 08/13/2015

Application Dated: 08/13/2015
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYSARAG350
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.66 2.5  PM 254KGXW
22H 824.2  -  848.8 0.445 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.977 2.5  PM 251KGXW
24E 1850.2  -  1909.8 0.262 2.5  PM 249KGXW

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 8.39 dBi for 850MHz bands and 3.11 dBi for 1900 MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

C2PC as described in this filing. SAR was evaluated in specific host model: TSONE, with specific antenna(s) as described in this filing. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1.5 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The highest reported SAR for body and simultaneous transmission use conditions are 1.40 W/kg and 1.55 W/kg respectively.


EAS Grant - Application E5qw76TSDjXXa6aCFC0uZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland 		  Date of Grant: 08/13/2015

Application Dated: 08/13/2015
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYSARAG350
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.66 2.5  PM 254KGXW
22H 824.2  -  848.8 0.445 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.977 2.5  PM 251KGXW
24E 1850.2  -  1909.8 0.262 2.5  PM 249KGXW

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 8.39 dBi for 850MHz bands and 3.11 dBi for 1900 MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

C2PC as described in this filing. SAR was evaluated in specific host model: TSONE, with specific antenna(s) as described in this filing. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1.5 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The highest reported SAR for body and simultaneous transmission use conditions are 1.40 W/kg and 1.55 W/kg respectively.



TCB Grant - Application 9XnMMlSw+mE4LKE8Go+q/Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom 		Date of Grant: 08/28/2013

Application Dated: 08/28/2013
u-blox AG
u-blox AG
att. Giulio Comar
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYSARAG350
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: Quad band (GSM850, GSM 900, DCS 1800, PCS 1900) GSM/GPRS transmitter module.
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.66 2.5  PM 254KGXW
22H 824.2  -  848.8 0.445 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.977 2.5  PM 251KGXW
24E 1850.2  -  1909.8 0.262 2.5  PM 249KGXW

Class II Permissive Change as described in this filing. Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 8.39 dBi for 850MHz bands and 3.11 dBi for 1900 MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

EAS Grant - Application 9XnMMlSw+mE4LKE8Go+q/Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

u-blox AG
u-blox AG att. Giulio Comar
Thalwil, Ch-8800
Switzerland 		  Date of Grant: 08/28/2013

Application Dated: 08/28/2013
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYSARAG350
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: Quad band (GSM850, GSM 900, DCS 1800, PCS 1900) GSM/GPRS transmitter module.
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.66 2.5  PM 254KGXW
22H 824.2  -  848.8 0.445 2.5  PM 249KGXW
24E 1850.2  -  1909.8 0.977 2.5  PM 251KGXW
24E 1850.2  -  1909.8 0.262 2.5  PM 249KGXW

Class II Permissive Change as described in this filing. Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 8.39 dBi for 850MHz bands and 3.11 dBi for 1900 MHz bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.



Mail To: