FCC ID XPYTOBYL210

UMTS/GSM//LTE data module

by u-blox AG

Grantee Code: XPY   Product Code: TOBYL210
Latest application date: 2019-04-01

FCC ID Device Details

FCC IDXPYTOBYL210
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXPY
Product CodeTOBYL210
Applicant Businessu-blox AG 🇨🇭
Related Domains u-blox.com
Equipment ClassUMTS/GSM//LTE data module
Test Firm7layers GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2019-04-01
824.2-848.8 MHzOriginal Equipment2014-10-23

Exhibits

DocumentTypeAvailableFile
TempConfidential_TOBY-L2-MPCI-L2_SysIntegrManual_UBX-13004618Users Manual2019-09-25PDF 4.1 MB
System Integration ManualUsers Manual2015-04-21PDF 4.3 MB
TempConfidential_TOBY-L210_front_no_shieldInternal Photos2019-09-25PDF 1.8 MB
Internal PhotosInternal Photos2015-04-21PDF 176.8 KB
TOBY-L210_labelExternal Photos2019-09-25PDF 153.8 KB
TempConfidential_TOBY-L210_backExternal Photos2019-09-25PDF 1.8 MB
External PhotosExternal Photos2015-04-21PDF 515 KB
TOBY-L210_labelID Label/Location Info2019-04-01PDF 153.8 KB
Label LocationID Label/Location Info2014-10-23PDF 85.6 KB
TempConfidential_Photo_Report_FCC_L210Test Setup Photos2019-09-25PDF 608 KB
Test Setup PhotosTest Setup Photos2015-04-21PDF 309.8 KB
Test Setup Photos LTE Spurious EmissionTest Setup Photos2015-04-21PDF 215.9 KB
MDE_UBLOX_1807_FCCf-FINAL-2019-02-21Test Report2019-04-01PDF 1.4 MB
MDE_UBLOX_1807_FCCg-FINAL-2019-02-21Test Report2019-04-01PDF 1.4 MB
MDE_UBLOX_1807_FCCh_rev01-FINAL-2019-03-18Test Report2019-04-01PDF 1.4 MB
Test ReportTest Report2014-10-23PDF 655.8 KB
Test Report 2G 3GTest Report2014-10-23PDF 1.7 MB
Test Report LTE Part 22Test Report2014-10-23PDF 1.8 MB
Test Report LTE Part 27Test Report2014-10-23PDF 1.5 MB
Test Report LTE Spurious Emission Part 22Test Report2014-10-23PDF 331.9 KB
Test Report LTE Spurious Emission Part 27Test Report2014-10-23PDF 253.7 KB
FCC Authority Letter to act a Agent_TOBY-L2Cover Letter(s)2019-04-01PDF 490.7 KB
FCC Class II Permissive Change RequestCover Letter(s)2019-04-01PDF 863.5 KB
FCC_request_modular_approval_L210Cover Letter(s)2019-04-01PDF 281.4 KB
TOBY-L2_TCB Request for ConfidentialityCover Letter(s)2019-04-01PDF 975.3 KB
Agent AuthorizationCover Letter(s)2014-10-23PDF 140.9 KB
Modular ApprovalCover Letter(s)2014-10-23PDF 100.1 KB
Request for ConfidentialityCover Letter(s)2014-10-23PDF 105.1 KB
MDE_UBLOX_1807_L210_MPEeRF Exposure Info2019-04-01PDF 626.1 KB
MPE CalculationRF Exposure Info2014-10-23PDF 451.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 2.6 MB
Confidential_TOBY-L2 series - Block Diagram Metadata onlyBlock DiagramPDF 153.6 KB
Confidential_SE_L20_HS_192E01 Metadata onlySchematicsPDF 656.5 KB
Schematics Metadata onlySchematicsPDF 697 KB
7Layers_Delta Description TOBY-L2XX Metadata onlyOperational DescriptionPDF 719.2 KB
Confidential_TOBY-L2_DataSheet_UBX-13004573 Metadata onlyOperational DescriptionPDF 1.8 MB
Operational Description Metadata onlyOperational DescriptionPDF 2.6 MB
TOBY-L2XX Delta Description - Part 2 - with notes Metadata onlyOperational DescriptionPDF 76.9 KB
Confidential_SE_L20_BM_192E01 Metadata onlyParts List/Tune Up InfoPDF 351.1 KB
Confidential_TOBY-L2_Tune_Up_Procedure Metadata onlyParts List/Tune Up InfoPDF 107.1 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 338.1 KB
Tune-Up Procedure Metadata onlyParts List/Tune Up InfoPDF 107.1 KB

Application Information

Application IDP2GWCFTvz88X9DKQ3FpV/g==
Final Action Date2019-04-01
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019077858
ModelTOBYL210
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionUMTS/GSM//LTE data module
Responsible PartyGiulio Comar, Certification Manager, giulio.comar@u-blox.com , +390402529400
Technical ContactGiulio Comar, u-blox, giulio.comar@u-blox.com
Test FirmBernhard Retka, 7layers GmbH, Bernhard.Retka@7layers.com , 0049 2102 749 452
TCB Emailhotline@acbcert.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/25/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power listed is conducted average. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is: 1.0 dBi for GSM 850; 2.8 dBi for GSM 1900; 6.7 dBi for UMTS-5; 8.5 dBi for UMTS-2; 7.2 dBi for LTE FDD-5, and 6.0 dBi for LTE FDD-7. This transmitter is certified for fixed and mobile installations and the transmitter antenna must be installed to provide a separation distance of at least 20 cm from all persons. The transmitter antenna must not be co-located or operated in conjunction with any other transmitter antenna, except in accordance with FCC multi-transmitter product procedures or as shown in this filing. End users and installers must be provided with instructions to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. This device contains GSM/WCDMA/LTE functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz Cell, 1900 MHz PCS and 2500 MHz BRS operations. This device has 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 5; and 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 7. C2PC application with some hardware changes as documented in this filing. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

Applications

Application IDDatePurpose
P2GWCFTvz88X9DKQ3FpV/g==2019-04-01Class II permissive change or modification of presently authorized equipment
wO9q80lUtXIHRXj9gQ7NCw==2014-10-23Original Equipment
ElzUx6BSD+ZMtMjW5n4OOQ==2014-10-23Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
824.2-848.8 MHz0.608137Hz252KG7W22HBC
824.7-848.3 MHz0.27117Hz8M97G7D22HBC
824.7-848.3 MHz0.263617Hz8M97W7D22HBC
826.4-846.6 MHz0.163714Hz4M15F9W22HBC
1850.2-1909.8 MHz0.939760Hz244KGXW24EBC
1850.2-1909.8 MHz0.419660Hz246KG7W24EBC
1852.4-1907.6 MHz0.1517153Hz4M17F9W24EBC
2502.5-2567.5 MHz0.173421Hz17M9W7D27BC
2502.5-2567.5 MHz0.176221Hz17M9G7D27BC

Grants

TCB Grant - Application wO9q80lUtXIHRXj9gQ7NCw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/23/2014

Application Dated: 10/23/2014
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYTOBYL210
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: GSM/UMTS/LTE Data Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

Also a Licensed Modular Transmitter.

EAS Grant - Application wO9q80lUtXIHRXj9gQ7NCw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 10/23/2014

Application Dated: 10/23/2014
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYTOBYL210
Name of Grantee:  u-blox AG
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: GSM/UMTS/LTE Data Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

Also a Licensed Modular Transmitter.



TCB Grant - Application P2GWCFTvz88X9DKQ3FpV/g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/01/2019

Application Dated: 03/28/2019
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYTOBYL210
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: UMTS/GSM//LTE data module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.722 37.0  Hz 242KGXW
BC 22H 824.2  -  848.8 0.6081 37.0  Hz 252KG7W
BC 22H 826.4  -  846.6 0.1637 14.0  Hz 4M15F9W
BC 22H 824.7  -  848.3 0.271 17.0  Hz 8M97G7D
BC 22H 824.7  -  848.3 0.2636 17.0  Hz 8M97W7D
BC 24E 1850.2  -  1909.8 0.9397 60.0  Hz 244KGXW
BC 24E 1850.2  -  1909.8 0.4196 60.0  Hz 246KG7W
BC 24E 1852.4  -  1907.6 0.1517 153.0  Hz 4M17F9W
BC 27 2502.5  -  2567.5 0.1762 21.0  Hz 17M9G7D
BC 27 2502.5  -  2567.5 0.1734 21.0  Hz 17M9W7D

Single Modular Approval. Power listed is conducted average.

The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is: 1.0 dBi for GSM 850; 2.8 dBi for GSM 1900; 6.7 dBi for UMTS-5; 8.5 dBi for UMTS-2; 7.2 dBi for LTE FDD-5, and 6.0 dBi for LTE FDD-7. This transmitter is certified for fixed and mobile installations and the transmitter antenna must be installed to provide a separation distance of at least 20 cm from all persons. The transmitter antenna must not be co-located or operated in conjunction with any other transmitter antenna, except in accordance with FCC multi-transmitter product procedures or as shown in this filing. End users and installers must be provided with instructions to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. This device contains GSM/WCDMA/LTE functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz Cell, 1900 MHz PCS and 2500 MHz BRS operations.

This device has 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 5; and 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 7.

C2PC application with some hardware changes as documented in this filing. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application P2GWCFTvz88X9DKQ3FpV/g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 04/01/2019

Application Dated: 03/28/2019
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYTOBYL210
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: UMTS/GSM//LTE data module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.722 37.0  Hz 242KGXW
BC 22H 824.2  -  848.8 0.6081 37.0  Hz 252KG7W
BC 22H 826.4  -  846.6 0.1637 14.0  Hz 4M15F9W
BC 22H 824.7  -  848.3 0.271 17.0  Hz 8M97G7D
BC 22H 824.7  -  848.3 0.2636 17.0  Hz 8M97W7D
BC 24E 1850.2  -  1909.8 0.9397 60.0  Hz 244KGXW
BC 24E 1850.2  -  1909.8 0.4196 60.0  Hz 246KG7W
BC 24E 1852.4  -  1907.6 0.1517 153.0  Hz 4M17F9W
BC 27 2502.5  -  2567.5 0.1762 21.0  Hz 17M9G7D
BC 27 2502.5  -  2567.5 0.1734 21.0  Hz 17M9W7D

Single Modular Approval. Power listed is conducted average.

The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is: 1.0 dBi for GSM 850; 2.8 dBi for GSM 1900; 6.7 dBi for UMTS-5; 8.5 dBi for UMTS-2; 7.2 dBi for LTE FDD-5, and 6.0 dBi for LTE FDD-7. This transmitter is certified for fixed and mobile installations and the transmitter antenna must be installed to provide a separation distance of at least 20 cm from all persons. The transmitter antenna must not be co-located or operated in conjunction with any other transmitter antenna, except in accordance with FCC multi-transmitter product procedures or as shown in this filing. End users and installers must be provided with instructions to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. This device contains GSM/WCDMA/LTE functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz Cell, 1900 MHz PCS and 2500 MHz BRS operations.

This device has 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 5; and 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 7.

C2PC application with some hardware changes as documented in this filing. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application ElzUx6BSD+ZMtMjW5n4OOQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/23/2014

Application Dated: 10/23/2014
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYTOBYL210
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: GSM/UMTS/LTE Data Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.722 37.0  Hz 242KGXW
BC 22H 824.2  -  848.8 0.6081 37.0  Hz 252KG7W
BC 22H 826.4  -  846.6 0.1637 14.0  Hz 4M15F9W
BC 22H 824.7  -  848.3 0.271 17.0  Hz 8M97G7D
BC 22H 824.7  -  848.3 0.2636 17.0  Hz 8M97W7D
BC 24E 1850.2  -  1909.8 0.9397 60.0  Hz 244KGXW
BC 24E 1850.2  -  1909.8 0.4196 60.0  Hz 246KG7W
BC 24E 1852.4  -  1907.6 0.1517 153.0  Hz 4M17F9W
BC 27 2502.5  -  2567.5 0.1762 21.0  Hz 17M9G7D
BC 27 2502.5  -  2567.5 0.1734 21.0  Hz 17M9W7D

The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 4.3 dBi for 850 MHz, 2.8 dBi for 1900 MHz and 6.0 dBi for 2500 MHz bands. This transmitter is certified for fixed and mobile installations and the transmitter antenna must be installed to provide a separation distance of at least 20 cm from all persons. The transmitter antenna must not be co-located or operated in conjunction with any other transmitter antenna, except in accordance with FCC multi-transmitter product procedures or as shown in this filing. End users and installers must be provided with instructions to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. This device contains GSM/WCDMA/LTE functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz Cell, 1900 MHz PCS and 2500 MHz BRS operations.

This device has 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 5; and 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 7.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application ElzUx6BSD+ZMtMjW5n4OOQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 10/23/2014

Application Dated: 10/23/2014
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYTOBYL210
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: GSM/UMTS/LTE Data Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.722 37.0  Hz 242KGXW
BC 22H 824.2  -  848.8 0.6081 37.0  Hz 252KG7W
BC 22H 826.4  -  846.6 0.1637 14.0  Hz 4M15F9W
BC 22H 824.7  -  848.3 0.271 17.0  Hz 8M97G7D
BC 22H 824.7  -  848.3 0.2636 17.0  Hz 8M97W7D
BC 24E 1850.2  -  1909.8 0.9397 60.0  Hz 244KGXW
BC 24E 1850.2  -  1909.8 0.4196 60.0  Hz 246KG7W
BC 24E 1852.4  -  1907.6 0.1517 153.0  Hz 4M17F9W
BC 27 2502.5  -  2567.5 0.1762 21.0  Hz 17M9G7D
BC 27 2502.5  -  2567.5 0.1734 21.0  Hz 17M9W7D

The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 4.3 dBi for 850 MHz, 2.8 dBi for 1900 MHz and 6.0 dBi for 2500 MHz bands. This transmitter is certified for fixed and mobile installations and the transmitter antenna must be installed to provide a separation distance of at least 20 cm from all persons. The transmitter antenna must not be co-located or operated in conjunction with any other transmitter antenna, except in accordance with FCC multi-transmitter product procedures or as shown in this filing. End users and installers must be provided with instructions to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. This device contains GSM/WCDMA/LTE functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz Cell, 1900 MHz PCS and 2500 MHz BRS operations.

This device has 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 5; and 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 7.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: