FCC ID XPYUBX21BE01

LTE Radio Module

by u-blox AG

Grantee Code: XPY   Product Code: UBX21BE01
Latest application date: 2025-03-28

FCC ID Device Details

FCC IDXPYUBX21BE01
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXPY
Product CodeUBX21BE01
Applicant Businessu-blox AG 🇨🇭
Related Domains u-blox.com
Equipment ClassLTE Radio Module
Test FirmApplied Test Lab, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2025-03-28
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2024-01-08
2572.5-2617.5 MHzClass II permissive change or modification of presently authorized equipment2023-12-18
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2023-04-03
2572.5-2617.5 MHzOriginal Equipment2021-12-29

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2025-03-28PDF 839.5 KB
XPYUBX21BE01_UserManUsers Manual2024-07-07PDF 2 MB
User ManualUsers Manual2023-04-03PDF 4.1 MB
XPYUBX21BE01_UserManUsers Manual2022-06-27PDF 2.3 MB
Internal PhotosInternal Photos2025-03-28PDF 1.5 MB
XPYUBX21BE01_IntPhoInternal Photos2024-07-07PDF 339.8 KB
XPYUBX21BE01_IntPhoInternal Photos2024-06-15PDF 195.6 KB
XPYUBX21BE01_IntPhoInternal Photos2022-06-27PDF 192.3 KB
External PhotosExternal Photos2025-03-28PDF 247.6 KB
XPYUBX21BE01_ExtPhoExternal Photos2024-07-07PDF 324.7 KB
XPYUBX21BE01_ExtPhoExternal Photos2024-07-07PDF 664.8 KB
XPYUBX21BE01_ExtPhoExternal Photos2024-06-15PDF 680.9 KB
XPYUBX21BE01_ExtPhoExternal Photos2024-06-15PDF 267.5 KB
External PhotosExternal Photos2023-04-03PDF 296.7 KB
XPYUBX21BE01_ExtPhoExternal Photos2022-06-27PDF 88.3 KB
Label InformationID Label/Location Info2025-03-28PDF 105.5 KB
XPYUBX21BE01_LabelSamplID Label/Location Info2023-12-18PDF 41.8 KB
XPYUBX21BE01_LabelSmplID Label/Location Info2023-12-18PDF 48.6 KB
LabelID Label/Location Info2023-04-03PDF 392.6 KB
XPYUBX21BE01_LabelSmpl-LocID Label/Location Info2021-12-29PDF 94 KB
XPYUBX21BE01_TSupTest Setup Photos2024-07-07PDF 995.6 KB
Antenna Gain ComplianceTest Report2025-03-28PDF 583.3 KB
Antenna InformationTest Report2025-03-28PDF 3.1 MB
Test ReportTest Report2025-03-28PDF 1.1 MB
XPYUBX21BE01_TRpt_PCB_C2PCTest Report2024-01-08PDF 989.5 KB
XPYUBX21BE01_AntSpecTest Report2023-12-18PDF 147.6 KB
XPYUBX21BE01_TRptTest Report2023-12-18PDF 1.9 MB
Test ReportTest Report2023-04-03PDF 2.6 MB
XPYUBX21BE01_TRpt_PCB_1Test Report2021-12-29PDF 3 MB
XPYUBX21BE01_TRpt_PCB_2Test Report2021-12-29PDF 4.4 MB
XPYUBX21BE01_TRpt_PCB_3Test Report2021-12-29PDF 4.3 MB
XPYUBX21BE01_TRpt_PCB_4Test Report2021-12-29PDF 850.5 KB
Att Statements 2.911(d)(5)(7)Attestation Statements2025-03-28PDF 68.1 KB
Att Statements 2.911(d)(5)(i)&(ii)Attestation Statements2025-03-28PDF 49.2 KB
XPYUBX21BE01_CovEqu_2.911_d_5_i_iiAttestation Statements2024-01-08PDF 49.6 KB
XPYUBX21BE01_USAgent_2.911_d_7Attestation Statements2024-01-08PDF 68.1 KB
XPYUBX21BE01_USAgent_2.911_d_7 updateAttestation Statements2024-01-08PDF 38.3 KB
XPYUBX21BE01_CovEqu_2.911_d_5i_iiAttestation Statements2023-12-18PDF 49.6 KB
Attestation Statements Part 2.911(d)(7)Attestation Statements2023-04-03PDF 65.7 KB
Attstn Stmt Part 2.911(d)(5)(i)&(ii)Attestation Statements2023-04-03PDF 48.9 KB
Authorization LetterCover Letter(s)2025-03-28PDF 55 KB
C2PC LetterCover Letter(s)2025-03-28PDF 63.8 KB
XPYUBX21BE01_AutLetCover Letter(s)2024-01-08PDF 49.2 KB
XPYUBX21BE01_C2PCLetCover Letter(s)2024-01-08PDF 50.6 KB
XPYUBX21BE01_ConReq_STCCover Letter(s)2024-01-08PDF 76.8 KB
XPYUBX21BE01_MALCover Letter(s)2024-01-08PDF 109.9 KB
XPYUBX21BE01_AutLetCover Letter(s)2023-12-18PDF 49.4 KB
XPYUBX21BE01_C2PC LetterCover Letter(s)2023-12-18PDF 48.4 KB
XPYUBX21BE01_ConReqCover Letter(s)2023-12-18PDF 76.8 KB
XPYUBX21BE01_ModulLetterCover Letter(s)2023-12-18PDF 109.9 KB
Agent Authorization LetterCover Letter(s)2023-04-03PDF 56.5 KB
C2PC LetterCover Letter(s)2023-04-03PDF 64.2 KB
Confidentiality Request LetterCover Letter(s)2023-04-03PDF 101.1 KB
Cover Letter C2PCCover Letter(s)2023-04-03PDF 139.2 KB
XPYUBX21BE01_AutLetCover Letter(s)2021-12-29PDF 127.9 KB
XPYUBX21BE01_ConReqCover Letter(s)2021-12-29PDF 185.4 KB
XPYUBX21BE01_ModApprLetCover Letter(s)2021-12-29PDF 176.2 KB
XPYUBX21BE01_STCCover Letter(s)2021-12-29PDF 185.4 KB
RF ExposureRF Exposure Info2025-03-28PDF 404.5 KB
XPYUBX21BE01_RFExpRF Exposure Info2024-01-08PDF 660.2 KB
XPYUBX21BE01_RFExpRF Exposure Info2023-12-18PDF 440.4 KB
SAR ReportRF Exposure Info2023-04-03PDF 4.7 MB
XPYUBX21BE01_RFExpRF Exposure Info2021-12-29PDF 466.2 KB
Internal Photos Metadata onlyInternal PhotosPDF 879.1 KB
XPYUBX21BE01_BlkDia Metadata onlyBlock DiagramPDF 408.1 KB
XPYUBX21BE01_Schem Metadata onlySchematicsPDF 918 KB
XPYUBX21BE01_Schem Metadata onlySchematicsPDF 896.3 KB
OD Antenna Gain Compliance Metadata onlyOperational DescriptionPDF 635.6 KB
XPYUBX21BE01_AntSpec Metadata onlyOperational DescriptionPDF 153.5 KB
XPYUBX21BE01_OpDes Metadata onlyOperational DescriptionPDF 174.4 KB
XPYUBX21BE01_OpDes Metadata onlyOperational DescriptionPDF 616.4 KB
XPYUBX21BE01_BoM Metadata onlyParts List/Tune Up InfoPDF 359.6 KB
XPYUBX21BE01_PartLst Metadata onlyParts List/Tune Up InfoPDF 557.5 KB
XPYUBX21BE01_Partlst Metadata onlyParts List/Tune Up InfoPDF 557.5 KB
XPYUBX21BE01_TunInfo Metadata onlyParts List/Tune Up InfoPDF 168.6 KB

Application Information

Application IDXRSuZjTGnIpx+5+yoZpI+g==
Final Action Date2025-03-28
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019077858
ModelUBX21BE01
Frequency Range699.7-715.3 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionLTE Radio Module
Responsible PartyFilip Kruzela, Certification Manager, filip.kruzela@u-blox.com , +46733207170
Test FirmDr. Adiseshu Nyshadham, Applied Test Lab, Inc., adin@appliedtestlab.com , 403-590-8701
TCB Emailtei@timcoengr.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. Single Modular Approval. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.9dBi at GSM850; 4.5dBi at GSM1900; 9.9dBi at FDD Band 2; 9.5dBi at FDD LTE Band 2; 6.0dBi at FDD LTE Band 4; 10.4dBi at FDD Band 5 and FDD LTE Bands 5 and 26; 10.3dBi at FDD LTE Band 7; 10.2dBi at FDD LTE Band 13; 9.7dBi at FDD LTE Band 12; and 10.8dBi at FDD LTE Band 8; 9.1dBi at TDD LTE Band 38; 8.8dBi at TDD LTE Band 41. Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2 and 4; bandwidth modes of 5, 10, 15 and 20 MHz for FDD LTE Band 7 and TDD LTE Bands 38 and 41; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12 and 26; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and bandwidth modes of 1.4 and 3 MHz for FDD LTE Band 8. Class II Permissive Change: Authorizes integration into Blackline Safety Corp.?s Model 103989 Bridge as described in this filing.

Applications

Application IDDatePurpose
XRSuZjTGnIpx+5+yoZpI+g==2025-03-28Class II permissive change or modification of presently authorized equipment
4n+JV+WRAlcYkwdek0Brjw==2024-01-08Class II permissive change or modification of presently authorized equipment
eBYNy8PkCL0fVTvDcT+Z3w==2023-12-18Class II permissive change or modification of presently authorized equipment
iSQzkR+JdlhYy8hyBpyGBQ==2023-04-03Class II permissive change or modification of presently authorized equipment
QROeKhB5g8yxOfX5JWesFw==2021-12-29Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
699.7-715.3 MHz0.2750.1ppm9M02G7D27
699.7-715.3 MHz0.2750.1ppm
699.7-715.3 MHz0.1940.1ppm4M29W7D27
699.7-715.3 MHz0.1940.1ppm
699.7-715.3 MHz0.1840.1ppm2M53W7D27
699.7-715.3 MHz0.1840.1ppm
779.5-784.5 MHz0.2550.1ppm8M98G7D27
779.5-784.5 MHz0.2550.1ppm
779.5-784.5 MHz0.190.1ppm4M51W7D27
779.5-784.5 MHz0.190.1ppm
779.5-784.5 MHz0.1650.1ppm2M48W7D27
779.5-784.5 MHz0.1650.1ppm
814.7-823.3 MHz0.2360.1ppm2M75G7D9
814.7-823.3 MHz0.1750.1ppm2M75W7D9
814.7-823.3 MHz0.2340.1ppm8M98G7D9
814.7-823.3 MHz0.1670.1ppm2M48W7D9
814.7-823.3 MHz0.2360.1ppm
814.7-823.3 MHz0.1750.1ppm
814.7-823.3 MHz0.2340.1ppm
814.7-823.3 MHz0.1670.1ppm
824.7-848.3 MHz0.1640.1ppm2M53W7D22H
824.7-848.3 MHz0.1640.1ppm
824.7-848.3 MHz0.2590.1ppm9M02G7D22H
824.7-848.3 MHz0.2590.1ppm
824.7-848.3 MHz0.2080.1ppm2M53W7D22H
824.7-848.3 MHz0.2080.1ppm
824.7-848.3 MHz0.2540.1ppm9M02G7D22H
824.7-848.3 MHz0.2540.1ppm
824.7-848.3 MHz0.1680.1ppm4M53W7D22H
824.7-848.3 MHz0.1680.1ppm
826.4-846.6 MHz0.1940.1ppm4M11F9W22H
826.4-846.6 MHz0.1940.1ppm
898.2-899.2 MHz0.1910.1ppm2M77W7D27
898.2-899.8 MHz0.1620.1ppm21M10W727
898.2-899.8 MHz0.1520.1ppm2M77W7D27
898.2-899.8 MHz0.1910.1ppm2M75G7D27
898.2-899.8 MHz0.1910.1ppm
898.2-899.8 MHz0.1620.1ppm1M10W7D27
898.2-899.8 MHz0.1620.1ppm
898.2-899.8 MHz0.1520.1ppm
1710.7-1754.3 MHz0.2490.1ppm18M1G7D27
1710.7-1754.3 MHz0.2490.1ppm

Grants

TCB Grant - Application XRSuZjTGnIpx+5+yoZpI+g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 03/28/2025

Application Dated: 03/28/2025
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Filip Kruzela , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE01
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: LTE Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.429 0.1  PM 312KGXW
22H 824.2  -  848.8 0.475 0.1  PM 295KG7W
22H 826.4  -  846.6 0.212 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.188 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.194 0.1  PM 4M11F9W
22H 824.7  -  848.3 0.259 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.208 0.1  PM 2M53W7D
22H 824.7  -  848.3 0.254 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.168 0.1  PM 4M53W7D
22H 824.7  -  848.3 0.164 0.1  PM 2M53W7D
24E 1850.2  -  1909.8 0.716 0.1  PM 322KGXW
24E 1850.2  -  1909.8 0.337 0.1  PM 285KG7W
24E 1852.4  -  1907.6 0.203 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.192 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.185 0.1  PM 4M17F9W
24E 1850.7  -  1909.3 0.222 0.1  PM 18M2G7D
24E 1850.7  -  1909.3 0.187 0.1  PM 4M17W7D
27 699.7  -  715.3 0.275 0.1  PM 9M02G7D
27 699.7  -  715.3 0.194 0.1  PM 4M29W7D
27 699.7  -  715.3 0.184 0.1  PM 2M53W7D
27 779.5  -  784.5 0.255 0.1  PM 8M98G7D
27 779.5  -  784.5 0.19 0.1  PM 4M51W7D
27 779.5  -  784.5 0.165 0.1  PM 2M48W7D
27 1710.7  -  1754.3 0.249 0.1  PM 18M1G7D
27 1710.7  -  1754.3 0.187 0.1  PM 3M73W7D
27 1710.7  -  1754.3 0.179 0.1  PM 4M25W7D
27 2502.5  -  2567.5 0.186 0.1  PM 8M98G7D
27 2502.5  -  2567.5 0.162 0.1  PM 3M73W7D
27 2502.5  -  2567.5 0.177 0.1  PM 18M1G7D
27 2502.5  -  2567.5 0.148 0.1  PM 4M17W7D
27 2572.5  -  2617.5 0.248 0.1  PM 9M14G7D
27 2572.5  -  2617.5 0.212 0.1  PM 2M53W7D
27 2572.5  -  2617.5 0.244 0.1  PM 18M2G7D
27 2572.5  -  2617.5 0.175 0.1  PM 4M41W7D
27 2498.5  -  2687.5 0.267 0.1  PM 9M02G7D
27 2498.5  -  2687.5 0.219 0.1  PM 2M53W7D
27 2498.5  -  2687.5 0.224 0.1  PM 18M2G7D
27 2498.5  -  2687.5 0.177 0.1  PM 4M49W7D
27 898.2  -  899.8 0.191 0.1  PM 2M75G7D
27 898.2  -  899.8 0.162 0.1  PM 1M10W7D
27 898.2  -  899.8 0.152 0.1  PM 2M77W7D
90 814.7  -  823.3 0.236 0.1  PM 2M75G7D
90 814.7  -  823.3 0.175 0.1  PM 2M75W7D
90 814.7  -  823.3 0.234 0.1  PM 8M98G7D
90 814.7  -  823.3 0.167 0.1  PM 2M48W7D

Output power listed is conducted. Single Modular Approval. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.9dBi at GSM850; 4.5dBi at GSM1900; 9.9dBi at FDD Band 2; 9.5dBi at FDD LTE Band 2; 6.0dBi at FDD LTE Band 4; 10.4dBi at FDD Band 5 and FDD LTE Bands 5 and 26; 10.3dBi at FDD LTE Band 7; 10.2dBi at FDD LTE Band 13; 9.7dBi at FDD LTE Band 12; and 10.8dBi at FDD LTE Band 8; 9.1dBi at TDD LTE Band 38; 8.8dBi at TDD LTE Band 41. Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2 and 4; bandwidth modes of 5, 10, 15 and 20 MHz for FDD LTE Band 7 and TDD LTE Bands 38 and 41; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12 and 26; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and bandwidth modes of 1.4 and 3 MHz for FDD LTE Band 8. Class II Permissive Change: Authorizes integration into Blackline Safety Corp.?s Model 103989 Bridge as described in this filing.

TCB Grant - Application QROeKhB5g8yxOfX5JWesFw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 12/29/2021

Application Dated: 12/29/2021
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE01
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 2G / 3G / LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.429 0.1  PM 312KGXW
22H 824.2  -  848.8 0.475 0.1  PM 295KG7W
22H 826.4  -  846.6 0.212 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.188 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.194 0.1  PM 4M11F9W
22H 824.7  -  848.3 0.259 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.208 0.1  PM 2M53W7D
22H 824.7  -  848.3 0.254 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.168 0.1  PM 4M53W7D
22H 824.7  -  848.3 0.164 0.1  PM 2M53W7D
24E 1850.2  -  1909.8 0.716 0.1  PM 322KGXW
24E 1850.2  -  1909.8 0.337 0.1  PM 285KG7W
24E 1852.4  -  1907.6 0.203 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.192 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.185 0.1  PM 4M17F9W
24E 1850.7  -  1909.3 0.222 0.1  PM 18M2G7D
24E 1850.7  -  1909.3 0.187 0.1  PM 4M17W7D
27 699.7  -  715.3 0.275 0.1  PM 9M02G7D
27 699.7  -  715.3 0.194 0.1  PM 4M29W7D
27 699.7  -  715.3 0.184 0.1  PM 2M53W7D
27 779.5  -  784.5 0.255 0.1  PM 8M98G7D
27 779.5  -  784.5 0.19 0.1  PM 4M51W7D
27 779.5  -  784.5 0.165 0.1  PM 2M48W7D
27 1710.7  -  1754.3 0.249 0.1  PM 18M1G7D
27 1710.7  -  1754.3 0.187 0.1  PM 3M73W7D
27 1710.7  -  1754.3 0.179 0.1  PM 4M25W7D
27 2502.5  -  2567.5 0.186 0.1  PM 8M98G7D
27 2502.5  -  2567.5 0.162 0.1  PM 3M73W7D
27 2502.5  -  2567.5 0.177 0.1  PM 18M1G7D
27 2502.5  -  2567.5 0.148 0.1  PM 4M17W7D
27 2572.5  -  2617.5 0.248 0.1  PM 9M14G7D
27 2572.5  -  2617.5 0.212 0.1  PM 2M53W7D
27 2572.5  -  2617.5 0.244 0.1  PM 18M2G7D
27 2572.5  -  2617.5 0.175 0.1  PM 4M41W7D
27 2498.5  -  2687.5 0.267 0.1  PM 9M02G7D
27 2498.5  -  2687.5 0.219 0.1  PM 2M53W7D
27 2498.5  -  2687.5 0.224 0.1  PM 18M2G7D
27 2498.5  -  2687.5 0.177 0.1  PM 4M49W7D
27 898.2  -  899.8 0.191 0.1  PM 2M75G7D
27 898.2  -  899.8 0.162 0.1  PM 1M10W7D
27 898.2  -  899.8 0.152 0.1  PM 2M77W7D
90 814.7  -  823.3 0.236 0.1  PM 2M75G7D
90 814.7  -  823.3 0.175 0.1  PM 2M75W7D
90 814.7  -  823.3 0.234 0.1  PM 8M98G7D
90 814.7  -  823.3 0.167 0.1  PM 2M48W7D

Output power listed is conducted. Single Modular Approval The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.9dBi at GSM850; 9.5dBi at GSM1900; 13.0dBi at FDD LTE Band 2,4 and TDD LTE Band 38,41; 10.4dBi at FDD LTE Band 5 and 26; 13.5dBi at FDD LTE Band 7; 10.2dBi at FDD LTE Band 13; 9.7dBi at LTE Band 12 and 10.8dBi at FDD LTE Band 8. Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2 and 4; bandwidth modes of 5, 10, 15 and 20 MHz for FDD LTE Band 7 and TDD LTE Bands 38 and 41; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12 and 26; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and bandwidth modes of 1.4 and 3 MHz for FDD LTE Band 8.

EAS Grant - Application QROeKhB5g8yxOfX5JWesFw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 12/29/2021

Application Dated: 12/29/2021
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE01
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 2G / 3G / LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.429 0.1  PM 312KGXW
22H 824.2  -  848.8 0.475 0.1  PM 295KG7W
22H 826.4  -  846.6 0.212 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.188 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.194 0.1  PM 4M11F9W
22H 824.7  -  848.3 0.259 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.208 0.1  PM 2M53W7D
22H 824.7  -  848.3 0.254 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.168 0.1  PM 4M53W7D
22H 824.7  -  848.3 0.164 0.1  PM 2M53W7D
24E 1850.2  -  1909.8 0.716 0.1  PM 322KGXW
24E 1850.2  -  1909.8 0.337 0.1  PM 285KG7W
24E 1852.4  -  1907.6 0.203 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.192 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.185 0.1  PM 4M17F9W
24E 1850.7  -  1909.3 0.222 0.1  PM 18M2G7D
24E 1850.7  -  1909.3 0.187 0.1  PM 4M17W7D
27 699.7  -  715.3 0.275 0.1  PM 9M02G7D
27 699.7  -  715.3 0.194 0.1  PM 4M29W7D
27 699.7  -  715.3 0.184 0.1  PM 2M53W7D
27 779.5  -  784.5 0.255 0.1  PM 8M98G7D
27 779.5  -  784.5 0.19 0.1  PM 4M51W7D
27 779.5  -  784.5 0.165 0.1  PM 2M48W7D
27 1710.7  -  1754.3 0.249 0.1  PM 18M1G7D
27 1710.7  -  1754.3 0.187 0.1  PM 3M73W7D
27 1710.7  -  1754.3 0.179 0.1  PM 4M25W7D
27 2502.5  -  2567.5 0.186 0.1  PM 8M98G7D
27 2502.5  -  2567.5 0.162 0.1  PM 3M73W7D
27 2502.5  -  2567.5 0.177 0.1  PM 18M1G7D
27 2502.5  -  2567.5 0.148 0.1  PM 4M17W7D
27 2572.5  -  2617.5 0.248 0.1  PM 9M14G7D
27 2572.5  -  2617.5 0.212 0.1  PM 2M53W7D
27 2572.5  -  2617.5 0.244 0.1  PM 18M2G7D
27 2572.5  -  2617.5 0.175 0.1  PM 4M41W7D
27 2498.5  -  2687.5 0.267 0.1  PM 9M02G7D
27 2498.5  -  2687.5 0.219 0.1  PM 2M53W7D
27 2498.5  -  2687.5 0.224 0.1  PM 18M2G7D
27 2498.5  -  2687.5 0.177 0.1  PM 4M49W7D
27 898.2  -  899.8 0.191 0.1  PM 2M75G7D
27 898.2  -  899.8 0.162 0.1  PM 1M10W7D
27 898.2  -  899.8 0.152 0.1  PM 2M77W7D
90 814.7  -  823.3 0.236 0.1  PM 2M75G7D
90 814.7  -  823.3 0.175 0.1  PM 2M75W7D
90 814.7  -  823.3 0.234 0.1  PM 8M98G7D
90 814.7  -  823.3 0.167 0.1  PM 2M48W7D

Output power listed is conducted. Single Modular Approval The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.9dBi at GSM850; 9.5dBi at GSM1900; 13.0dBi at FDD LTE Band 2,4 and TDD LTE Band 38,41; 10.4dBi at FDD LTE Band 5 and 26; 13.5dBi at FDD LTE Band 7; 10.2dBi at FDD LTE Band 13; 9.7dBi at LTE Band 12 and 10.8dBi at FDD LTE Band 8. Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2 and 4; bandwidth modes of 5, 10, 15 and 20 MHz for FDD LTE Band 7 and TDD LTE Bands 38 and 41; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12 and 26; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and bandwidth modes of 1.4 and 3 MHz for FDD LTE Band 8.



TCB Grant - Application iSQzkR+JdlhYy8hyBpyGBQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/03/2023

Application Dated: 04/03/2023
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE01
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 2G / 3G / LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.429 0.1  PM 312KGXW
22H 824.2  -  848.8 0.475 0.1  PM 295KG7W
22H 826.4  -  846.6 0.212 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.188 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.194 0.1  PM 4M11F9W
22H 824.7  -  848.3 0.259 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.208 0.1  PM 2M53W7D
22H 824.7  -  848.3 0.254 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.168 0.1  PM 4M53W7D
22H 824.7  -  848.3 0.164 0.1  PM 2M53W7D
24E 1850.2  -  1909.8 0.716 0.1  PM 322KGXW
24E 1850.2  -  1909.8 0.337 0.1  PM 285KG7W
24E 1852.4  -  1907.6 0.203 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.192 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.185 0.1  PM 4M17F9W
24E 1850.7  -  1909.3 0.222 0.1  PM 18M2G7D
24E 1850.7  -  1909.3 0.187 0.1  PM 4M17W7D
27 699.7  -  715.3 0.275 0.1  PM 9M02G7D
27 699.7  -  715.3 0.194 0.1  PM 4M29W7D
27 699.7  -  715.3 0.184 0.1  PM 2M53W7D
27 779.5  -  784.5 0.255 0.1  PM 8M98G7D
27 779.5  -  784.5 0.19 0.1  PM 4M51W7D
27 779.5  -  784.5 0.165 0.1  PM 2M48W7D
27 1710.7  -  1754.3 0.249 0.1  PM 18M1G7D
27 1710.7  -  1754.3 0.187 0.1  PM 3M73W7D
27 1710.7  -  1754.3 0.179 0.1  PM 4M25W7D
27 2502.5  -  2567.5 0.186 0.1  PM 8M98G7D
27 2502.5  -  2567.5 0.162 0.1  PM 3M73W7D
27 2502.5  -  2567.5 0.177 0.1  PM 18M1G7D
27 2502.5  -  2567.5 0.148 0.1  PM 4M17W7D
27 2572.5  -  2617.5 0.248 0.1  PM 9M14G7D
27 2572.5  -  2617.5 0.212 0.1  PM 2M53W7D
27 2572.5  -  2617.5 0.244 0.1  PM 18M2G7D
27 2572.5  -  2617.5 0.175 0.1  PM 4M41W7D
27 2498.5  -  2687.5 0.267 0.1  PM 9M02G7D
27 2498.5  -  2687.5 0.219 0.1  PM 2M53W7D
27 2498.5  -  2687.5 0.224 0.1  PM 18M2G7D
27 2498.5  -  2687.5 0.177 0.1  PM 4M49W7D
27 898.2  -  899.8 0.191 0.1  PM 2M75G7D
27 898.2  -  899.8 0.162 0.1  PM 1M10W7D
27 898.2  -  899.8 0.152 0.1  PM 2M77W7D
90 814.7  -  823.3 0.236 0.1  PM 2M75G7D
90 814.7  -  823.3 0.175 0.1  PM 2M75W7D
90 814.7  -  823.3 0.234 0.1  PM 8M98G7D
90 814.7  -  823.3 0.167 0.1  PM 2M48W7D

Output power listed is conducted. Single Modular Approval. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.9dBi at GSM850; 4.5dBi at GSM1900; 9.9dBi at FDD Band 2; 9.5dBi at FDD LTE Band 2; 6.0dBi at FDD LTE Band 4; 10.4dBi at FDD Band 5 and FDD LTE Bands 5 and 26; 10.3dBi at FDD LTE Band 7; 10.2dBi at FDD LTE Band 13; 9.7dBi at FDD LTE Band 12; and 10.8dBi at FDD LTE Band 8; 9.1dBi at TDD LTE Band 38; 8.8dBi at TDD LTE Band 41. Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2 and 4; bandwidth modes of 5, 10, 15 and 20 MHz for FDD LTE Band 7 and TDD LTE Bands 38 and 41; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12 and 26; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and bandwidth modes of 1.4 and 3 MHz for FDD LTE Band 8.

Class II Permissive Change: Authorizes portable use when integrated into Blackline Safety Corp.’s Model G7C-NA2. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing, or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. The highest reported SAR for body-worn accessory and simultaneous transmission exposure conditions are 1.49 W/kg and 1.60 W/kg, respectively.


EAS Grant - Application iSQzkR+JdlhYy8hyBpyGBQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 04/03/2023

Application Dated: 04/03/2023
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE01
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 2G / 3G / LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.429 0.1  PM 312KGXW
22H 824.2  -  848.8 0.475 0.1  PM 295KG7W
22H 826.4  -  846.6 0.212 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.188 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.194 0.1  PM 4M11F9W
22H 824.7  -  848.3 0.259 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.208 0.1  PM 2M53W7D
22H 824.7  -  848.3 0.254 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.168 0.1  PM 4M53W7D
22H 824.7  -  848.3 0.164 0.1  PM 2M53W7D
24E 1850.2  -  1909.8 0.716 0.1  PM 322KGXW
24E 1850.2  -  1909.8 0.337 0.1  PM 285KG7W
24E 1852.4  -  1907.6 0.203 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.192 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.185 0.1  PM 4M17F9W
24E 1850.7  -  1909.3 0.222 0.1  PM 18M2G7D
24E 1850.7  -  1909.3 0.187 0.1  PM 4M17W7D
27 699.7  -  715.3 0.275 0.1  PM 9M02G7D
27 699.7  -  715.3 0.194 0.1  PM 4M29W7D
27 699.7  -  715.3 0.184 0.1  PM 2M53W7D
27 779.5  -  784.5 0.255 0.1  PM 8M98G7D
27 779.5  -  784.5 0.19 0.1  PM 4M51W7D
27 779.5  -  784.5 0.165 0.1  PM 2M48W7D
27 1710.7  -  1754.3 0.249 0.1  PM 18M1G7D
27 1710.7  -  1754.3 0.187 0.1  PM 3M73W7D
27 1710.7  -  1754.3 0.179 0.1  PM 4M25W7D
27 2502.5  -  2567.5 0.186 0.1  PM 8M98G7D
27 2502.5  -  2567.5 0.162 0.1  PM 3M73W7D
27 2502.5  -  2567.5 0.177 0.1  PM 18M1G7D
27 2502.5  -  2567.5 0.148 0.1  PM 4M17W7D
27 2572.5  -  2617.5 0.248 0.1  PM 9M14G7D
27 2572.5  -  2617.5 0.212 0.1  PM 2M53W7D
27 2572.5  -  2617.5 0.244 0.1  PM 18M2G7D
27 2572.5  -  2617.5 0.175 0.1  PM 4M41W7D
27 2498.5  -  2687.5 0.267 0.1  PM 9M02G7D
27 2498.5  -  2687.5 0.219 0.1  PM 2M53W7D
27 2498.5  -  2687.5 0.224 0.1  PM 18M2G7D
27 2498.5  -  2687.5 0.177 0.1  PM 4M49W7D
27 898.2  -  899.8 0.191 0.1  PM 2M75G7D
27 898.2  -  899.8 0.162 0.1  PM 1M10W7D
27 898.2  -  899.8 0.152 0.1  PM 2M77W7D
90 814.7  -  823.3 0.236 0.1  PM 2M75G7D
90 814.7  -  823.3 0.175 0.1  PM 2M75W7D
90 814.7  -  823.3 0.234 0.1  PM 8M98G7D
90 814.7  -  823.3 0.167 0.1  PM 2M48W7D

Output power listed is conducted. Single Modular Approval. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.9dBi at GSM850; 4.5dBi at GSM1900; 9.9dBi at FDD Band 2; 9.5dBi at FDD LTE Band 2; 6.0dBi at FDD LTE Band 4; 10.4dBi at FDD Band 5 and FDD LTE Bands 5 and 26; 10.3dBi at FDD LTE Band 7; 10.2dBi at FDD LTE Band 13; 9.7dBi at FDD LTE Band 12; and 10.8dBi at FDD LTE Band 8; 9.1dBi at TDD LTE Band 38; 8.8dBi at TDD LTE Band 41. Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2 and 4; bandwidth modes of 5, 10, 15 and 20 MHz for FDD LTE Band 7 and TDD LTE Bands 38 and 41; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12 and 26; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and bandwidth modes of 1.4 and 3 MHz for FDD LTE Band 8.

Class II Permissive Change: Authorizes portable use when integrated into Blackline Safety Corp.’s Model G7C-NA2. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing, or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. The highest reported SAR for body-worn accessory and simultaneous transmission exposure conditions are 1.49 W/kg and 1.60 W/kg, respectively.



TCB Grant - Application eBYNy8PkCL0fVTvDcT+Z3w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 12/18/2023

Application Dated: 12/18/2023
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE01
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 2G / 3G / LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.429 0.1  PM 312KGXW
22H 824.2  -  848.8 0.475 0.1  PM 295KG7W
22H 826.4  -  846.6 0.212 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.188 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.194 0.1  PM 4M11F9W
22H 824.7  -  848.3 0.259 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.208 0.1  PM 2M53W7D
22H 824.7  -  848.3 0.254 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.168 0.1  PM 4M53W7D
22H 824.7  -  848.3 0.164 0.1  PM 2M53W7D
24E 1850.2  -  1909.8 0.716 0.1  PM 322KGXW
24E 1850.2  -  1909.8 0.337 0.1  PM 285KG7W
24E 1852.4  -  1907.6 0.203 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.192 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.185 0.1  PM 4M17F9W
24E 1850.7  -  1909.3 0.222 0.1  PM 18M2G7D
24E 1850.7  -  1909.3 0.222 0.1  PM 4M17W7D
27 699.7  -  715.3 0.275 0.1  PM 9M02G7D
27 699.7  -  715.3 0.194 0.1  PM 4M29W7D
27 699.7  -  715.3 0.184 0.1  PM 2M53W7D
27 779.5  -  784.5 0.255 0.1  PM 8M98G7D
27 779.5  -  784.5 0.19 0.1  PM 4M51W7D
27 779.5  -  784.5 0.165 0.1  PM 2M48W7D
27 1710.7  -  1754.3 0.249 0.1  PM 18M1G7D
27 1710.7  -  1754.3 0.187 0.1  PM 3M73W7D
27 1710.7  -  1754.3 0.179 0.1  PM 4M25W7D
27 2502.5  -  2567.5 0.186 0.1  PM 8M98G7D
27 2502.5  -  2567.5 0.162 0.1  PM 3M73W7D
27 2502.5  -  2567.5 0.177 0.1  PM 18M1G7D
27 2502.5  -  2567.5 0.148 0.1  PM 4M17W7D
27 2572.5  -  2617.5 0.248 0.1  PM 9M14G7D
27 2572.5  -  2617.5 0.212 0.1  PM 2M53W7D
27 2572.5  -  2617.5 0.244 0.1  PM 18M1G7D
27 2572.5  -  2617.5 0.175 0.1  PM 4M41W7D
27 898.2  -  899.2 0.191 0.1  PM 2M77W7D
27 898.2  -  899.8 0.162 0.1  PM 21M10W7
27 898.2  -  899.8 0.152 0.1  PM 2M77W7D
90 814.7  -  823.3 0.236 0.1  PM 2M75G7D
90 814.7  -  823.3 0.175 0.1  PM 2M75W7D
90 814.7  -  823.3 0.234 0.1  PM 8M98G7D
90 814.7  -  823.3 0.167 0.1  PM 2M48W7D
27 2498.5  -  2617.5 0.267 0.1  PM 9M02G7D
27 2498.5  -  2687.5 0.219 0.1  PM 2M53W7D
27 2498.5  -  2687.5 0.244 0.1  PM 18M1G7D
27 2498.5  -  2687.5 0.177 0.1  PM 4M49W7D

Output power listed is conducted. Single Modular Approval. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.9dBi at GSM850; 4.5dBi at GSM1900; 9.9dBi at FDD Band 2; 9.5dBi at FDD LTE Band 2; 6.0dBi at FDD LTE Band 4; 10.4dBi at FDD Band 5 and FDD LTE Bands 5 and 26; 10.3dBi at FDD LTE Band 7; 10.2dBi at FDD LTE Band 13; 9.7dBi at FDD LTE Band 12; and 10.8dBi at FDD LTE Band 8; 9.1dBi at TDD LTE Band 38; 8.8dBi at TDD LTE Band 41. Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2 and 4; bandwidth modes of 5, 10, 15 and 20 MHz for FDD LTE Band 7 and TDD LTE Bands 38 and 41; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12 and 26; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and bandwidth modes of 1.4 and 3 MHz for FDD LTE Band 8.

C2PC covering pin to pin replacement of component.


EAS Grant - Application eBYNy8PkCL0fVTvDcT+Z3w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 12/18/2023

Application Dated: 12/18/2023
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE01
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 2G / 3G / LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.429 0.1  PM 312KGXW
22H 824.2  -  848.8 0.475 0.1  PM 295KG7W
22H 826.4  -  846.6 0.212 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.188 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.194 0.1  PM 4M11F9W
22H 824.7  -  848.3 0.259 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.208 0.1  PM 2M53W7D
22H 824.7  -  848.3 0.254 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.168 0.1  PM 4M53W7D
22H 824.7  -  848.3 0.164 0.1  PM 2M53W7D
24E 1850.2  -  1909.8 0.716 0.1  PM 322KGXW
24E 1850.2  -  1909.8 0.337 0.1  PM 285KG7W
24E 1852.4  -  1907.6 0.203 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.192 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.185 0.1  PM 4M17F9W
24E 1850.7  -  1909.3 0.222 0.1  PM 18M2G7D
24E 1850.7  -  1909.3 0.222 0.1  PM 4M17W7D
27 699.7  -  715.3 0.275 0.1  PM 9M02G7D
27 699.7  -  715.3 0.194 0.1  PM 4M29W7D
27 699.7  -  715.3 0.184 0.1  PM 2M53W7D
27 779.5  -  784.5 0.255 0.1  PM 8M98G7D
27 779.5  -  784.5 0.19 0.1  PM 4M51W7D
27 779.5  -  784.5 0.165 0.1  PM 2M48W7D
27 1710.7  -  1754.3 0.249 0.1  PM 18M1G7D
27 1710.7  -  1754.3 0.187 0.1  PM 3M73W7D
27 1710.7  -  1754.3 0.179 0.1  PM 4M25W7D
27 2502.5  -  2567.5 0.186 0.1  PM 8M98G7D
27 2502.5  -  2567.5 0.162 0.1  PM 3M73W7D
27 2502.5  -  2567.5 0.177 0.1  PM 18M1G7D
27 2502.5  -  2567.5 0.148 0.1  PM 4M17W7D
27 2572.5  -  2617.5 0.248 0.1  PM 9M14G7D
27 2572.5  -  2617.5 0.212 0.1  PM 2M53W7D
27 2572.5  -  2617.5 0.244 0.1  PM 18M1G7D
27 2572.5  -  2617.5 0.175 0.1  PM 4M41W7D
27 898.2  -  899.2 0.191 0.1  PM 2M77W7D
27 898.2  -  899.8 0.162 0.1  PM 21M10W7
27 898.2  -  899.8 0.152 0.1  PM 2M77W7D
90 814.7  -  823.3 0.236 0.1  PM 2M75G7D
90 814.7  -  823.3 0.175 0.1  PM 2M75W7D
90 814.7  -  823.3 0.234 0.1  PM 8M98G7D
90 814.7  -  823.3 0.167 0.1  PM 2M48W7D
27 2498.5  -  2617.5 0.267 0.1  PM 9M02G7D
27 2498.5  -  2687.5 0.219 0.1  PM 2M53W7D
27 2498.5  -  2687.5 0.244 0.1  PM 18M1G7D
27 2498.5  -  2687.5 0.177 0.1  PM 4M49W7D

Output power listed is conducted. Single Modular Approval. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.9dBi at GSM850; 4.5dBi at GSM1900; 9.9dBi at FDD Band 2; 9.5dBi at FDD LTE Band 2; 6.0dBi at FDD LTE Band 4; 10.4dBi at FDD Band 5 and FDD LTE Bands 5 and 26; 10.3dBi at FDD LTE Band 7; 10.2dBi at FDD LTE Band 13; 9.7dBi at FDD LTE Band 12; and 10.8dBi at FDD LTE Band 8; 9.1dBi at TDD LTE Band 38; 8.8dBi at TDD LTE Band 41. Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2 and 4; bandwidth modes of 5, 10, 15 and 20 MHz for FDD LTE Band 7 and TDD LTE Bands 38 and 41; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12 and 26; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and bandwidth modes of 1.4 and 3 MHz for FDD LTE Band 8.

C2PC covering pin to pin replacement of component.



TCB Grant - Application 4n+JV+WRAlcYkwdek0Brjw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 01/08/2024

Application Dated: 01/08/2024
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE01
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 2G / 3G / LTE Cat 4 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.429 0.1  PM 312KGXW
22H 824.2  -  848.8 0.475 0.1  PM 295KG7W
22H 826.4  -  846.6 0.212 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.188 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.194 0.1  PM 4M11F9W
22H 824.7  -  848.3 0.259 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.208 0.1  PM 2M53W7D
22H 824.7  -  848.3 0.254 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.168 0.1  PM 4M53W7D
22H 824.7  -  848.3 0.164 0.1  PM 2M53W7D
24E 1850.2  -  1909.8 0.716 0.1  PM 322KGXW
24E 1850.2  -  1909.8 0.337 0.1  PM 285KG7W
24E 1852.4  -  1907.6 0.203 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.192 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.185 0.1  PM 4M17F9W
24E 1850.7  -  1909.3 0.222 0.1  PM 18M2G7D
24E 1850.7  -  1909.3 0.187 0.1  PM 4M17W7D
27 699.7  -  715.3 0.275 0.1  PM 9M02G7D
27 699.7  -  715.3 0.194 0.1  PM 4M29W7D
27 699.7  -  715.3 0.184 0.1  PM 2M53W7D
27 779.5  -  784.5 0.255 0.1  PM 8M98G7D
27 779.5  -  784.5 0.19 0.1  PM 4M51W7D
27 779.5  -  784.5 0.165 0.1  PM 2M48W7D
27 1710.7  -  1754.3 0.249 0.1  PM 18M1G7D
27 1710.7  -  1754.3 0.187 0.1  PM 3M73W7D
27 1710.7  -  1754.3 0.179 0.1  PM 4M25W7D
27 2502.5  -  2567.5 0.186 0.1  PM 8M98G7D
27 2502.5  -  2567.5 0.162 0.1  PM 3M73W7D
27 2502.5  -  2567.5 0.177 0.1  PM 18M1G7D
27 2502.5  -  2567.5 0.148 0.1  PM 4M17W7D
27 2572.5  -  2617.5 0.248 0.1  PM 9M14G7D
27 2572.5  -  2617.5 0.212 0.1  PM 2M53W7D
27 2572.5  -  2617.5 0.244 0.1  PM 18M2G7D
27 2572.5  -  2617.5 0.175 0.1  PM 4M41W7D
27 2498.5  -  2687.5 0.267 0.1  PM 9M02G7D
27 2498.5  -  2687.5 0.219 0.1  PM 2M53W7D
27 2498.5  -  2687.5 0.224 0.1  PM 18M2G7D
27 2498.5  -  2687.5 0.177 0.1  PM 4M49W7D
27 898.2  -  899.8 0.191 0.1  PM 2M75G7D
27 898.2  -  899.8 0.162 0.1  PM 1M10W7D
27 898.2  -  899.8 0.152 0.1  PM 2M77W7D
90 814.7  -  823.3 0.236 0.1  PM 2M75G7D
90 814.7  -  823.3 0.175 0.1  PM 2M75W7D
90 814.7  -  823.3 0.234 0.1  PM 8M98G7D
90 814.7  -  823.3 0.167 0.1  PM 2M48W7D

Output power listed is conducted. Single Modular Approval. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.9dBi at GSM850; 4.5dBi at GSM1900; 9.9dBi at FDD Band 2; 9.5dBi at FDD LTE Band 2; 6.0dBi at FDD LTE Band 4; 10.4dBi at FDD Band 5 and FDD LTE Bands 5 and 26; 10.3dBi at FDD LTE Band 7; 10.2dBi at FDD LTE Band 13; 9.7dBi at FDD LTE Band 12; and 10.8dBi at FDD LTE Band 8; 9.1dBi at TDD LTE Band 38; 8.8dBi at TDD LTE Band 41. Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2 and 4; bandwidth modes of 5, 10, 15 and 20 MHz for FDD LTE Band 7 and TDD LTE Bands 38 and 41; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12 and 26; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and bandwidth modes of 1.4 and 3 MHz for FDD LTE Band 8.

C2PC covering pin to pin replacement of component.


EAS Grant - Application 4n+JV+WRAlcYkwdek0Brjw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
  Date of Grant: 01/08/2024

Application Dated: 01/08/2024
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE01
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: 2G / 3G / LTE Cat 4 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.429 0.1  PM 312KGXW
22H 824.2  -  848.8 0.475 0.1  PM 295KG7W
22H 826.4  -  846.6 0.212 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.188 0.1  PM 4M13F9W
22H 826.4  -  846.6 0.194 0.1  PM 4M11F9W
22H 824.7  -  848.3 0.259 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.208 0.1  PM 2M53W7D
22H 824.7  -  848.3 0.254 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.168 0.1  PM 4M53W7D
22H 824.7  -  848.3 0.164 0.1  PM 2M53W7D
24E 1850.2  -  1909.8 0.716 0.1  PM 322KGXW
24E 1850.2  -  1909.8 0.337 0.1  PM 285KG7W
24E 1852.4  -  1907.6 0.203 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.192 0.1  PM 4M13F9W
24E 1852.4  -  1907.6 0.185 0.1  PM 4M17F9W
24E 1850.7  -  1909.3 0.222 0.1  PM 18M2G7D
24E 1850.7  -  1909.3 0.187 0.1  PM 4M17W7D
27 699.7  -  715.3 0.275 0.1  PM 9M02G7D
27 699.7  -  715.3 0.194 0.1  PM 4M29W7D
27 699.7  -  715.3 0.184 0.1  PM 2M53W7D
27 779.5  -  784.5 0.255 0.1  PM 8M98G7D
27 779.5  -  784.5 0.19 0.1  PM 4M51W7D
27 779.5  -  784.5 0.165 0.1  PM 2M48W7D
27 1710.7  -  1754.3 0.249 0.1  PM 18M1G7D
27 1710.7  -  1754.3 0.187 0.1  PM 3M73W7D
27 1710.7  -  1754.3 0.179 0.1  PM 4M25W7D
27 2502.5  -  2567.5 0.186 0.1  PM 8M98G7D
27 2502.5  -  2567.5 0.162 0.1  PM 3M73W7D
27 2502.5  -  2567.5 0.177 0.1  PM 18M1G7D
27 2502.5  -  2567.5 0.148 0.1  PM 4M17W7D
27 2572.5  -  2617.5 0.248 0.1  PM 9M14G7D
27 2572.5  -  2617.5 0.212 0.1  PM 2M53W7D
27 2572.5  -  2617.5 0.244 0.1  PM 18M2G7D
27 2572.5  -  2617.5 0.175 0.1  PM 4M41W7D
27 2498.5  -  2687.5 0.267 0.1  PM 9M02G7D
27 2498.5  -  2687.5 0.219 0.1  PM 2M53W7D
27 2498.5  -  2687.5 0.224 0.1  PM 18M2G7D
27 2498.5  -  2687.5 0.177 0.1  PM 4M49W7D
27 898.2  -  899.8 0.191 0.1  PM 2M75G7D
27 898.2  -  899.8 0.162 0.1  PM 1M10W7D
27 898.2  -  899.8 0.152 0.1  PM 2M77W7D
90 814.7  -  823.3 0.236 0.1  PM 2M75G7D
90 814.7  -  823.3 0.175 0.1  PM 2M75W7D
90 814.7  -  823.3 0.234 0.1  PM 8M98G7D
90 814.7  -  823.3 0.167 0.1  PM 2M48W7D

Output power listed is conducted. Single Modular Approval. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3.9dBi at GSM850; 4.5dBi at GSM1900; 9.9dBi at FDD Band 2; 9.5dBi at FDD LTE Band 2; 6.0dBi at FDD LTE Band 4; 10.4dBi at FDD Band 5 and FDD LTE Bands 5 and 26; 10.3dBi at FDD LTE Band 7; 10.2dBi at FDD LTE Band 13; 9.7dBi at FDD LTE Band 12; and 10.8dBi at FDD LTE Band 8; 9.1dBi at TDD LTE Band 38; 8.8dBi at TDD LTE Band 41. Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2 and 4; bandwidth modes of 5, 10, 15 and 20 MHz for FDD LTE Band 7 and TDD LTE Bands 38 and 41; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12 and 26; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and bandwidth modes of 1.4 and 3 MHz for FDD LTE Band 8.

C2PC covering pin to pin replacement of component.



Mail To: