1. FCC ID
  2. XPY
  3. XPYUBX21BE02

FCC ID XPYUBX21BE02

LTE module

by u-blox AG

Grantee Code: XPY   Product Code: UBX21BE02
Latest application date: 2026-01-14

FCC ID Device Details

FCC IDXPYUBX21BE02
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXPY
Product CodeUBX21BE02
Applicant Businessu-blox AG 🇨🇭
Related Domains u-blox.com approve-it.net
Equipment ClassLTE module
Test FirmQAI LABORATORIES LTD.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
1850.7-1909.3 MHzClass II permissive change or modification of presently authorized equipment2026-01-14
1850.7-1909.3 MHzClass II permissive change or modification of presently authorized equipment2024-01-30
665.5-695.5 MHzOriginal Equipment2022-05-12

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2026-01-14PDF 3.6 MB
XPYUBX21BE02 UserManUsers Manual2024-07-28PDF 2 MB
XPYUBX21BE02_UserManUsers Manual2022-11-08PDF 2.3 MB
Internal PhotosInternal Photos2026-01-14PDF 3.6 MB
XPYUBX21BE02 IntPhoInternal Photos2024-07-28PDF 420.3 KB
XPYUBX21BE02_IntPho-1Internal Photos2022-11-08PDF 279.6 KB
XPYUBX21BE02_IntPho-2Internal Photos2022-11-08PDF 279.6 KB
XPYUBX21BE02_IntPho-3Internal Photos2022-11-08PDF 175.9 KB
XPYUBX21BE02_IntPho-4Internal Photos2022-11-08PDF 175.9 KB
External PhotosExternal Photos2026-01-14PDF 953.8 KB
XPYUBX21BE02_ExtPhoExternal Photos2024-07-28PDF 357.8 KB
XPYUBX21BE02_ExtPho-1External Photos2022-11-08PDF 129.4 KB
XPYUBX21BE02_ExtPho-2External Photos2022-11-08PDF 118.8 KB
Label InfoID Label/Location Info2026-01-14PDF 438.2 KB
Label LocationID Label/Location Info2026-01-14PDF 110.2 KB
XPYUBX21BE02_LabelSmplID Label/Location Info2024-01-30PDF 37.5 KB
XPYUBX21BE02_LabelSmplID Label/Location Info2024-01-30PDF 38 KB
XPYUBX21BE02_LabelSmpl-Loc-1ID Label/Location Info2022-05-12PDF 129.4 KB
XPYUBX21BE02_LabelSmpl-Loc-2ID Label/Location Info2022-05-12PDF 118.8 KB
Tsup BLETest Setup Photos2026-01-14PDF 932.4 KB
XPYUBX21BE02_TSupTest Setup Photos2024-07-28PDF 756.8 KB
Antenna Complience ReportTest Report2026-01-14PDF 417.2 KB
Co-Located Emissions ReportTest Report2026-01-14PDF 4.1 MB
Spurious Emissions ReportTest Report2026-01-14PDF 1.4 MB
XPYUBX21BE02_TRpt C2PCTest Report2024-01-30PDF 1 MB
XPYUBX21BE02_TRpt-1Test Report2022-05-12PDF 4 MB
XPYUBX21BE02_TRpt-2Test Report2022-05-12PDF 3.9 MB
XPYUBX21BE02_TRpt-3Test Report2022-05-12PDF 3 MB
Attestation Statement Part 2.911(d)(7)Attestation Statements2026-01-14PDF 291.2 KB
Attstn Stmts parts 2.911(d)(5)(i)&(ii)Attestation Statements2026-01-14PDF 48.7 KB
XPYUBX21BE02 Cov Equ 2.911 d 5 i iiAttestation Statements2024-01-30PDF 49.6 KB
XPYUBX21BE02 US Agent_2.911_d 7Attestation Statements2024-01-30PDF 68.1 KB
XPYUBX21BE02 US Agent_2.911_d 7 updatedAttestation Statements2024-01-30PDF 38.3 KB
Agent AuthorizationCover Letter(s)2026-01-14PDF 166.8 KB
C2PCCover Letter(s)2026-01-14PDF 123.6 KB
Class II Permissive Change cover letterCover Letter(s)2026-01-14PDF 166.1 KB
POACover Letter(s)2026-01-14PDF 66.5 KB
XPYUBX21BE02 C2PC LetCover Letter(s)2024-01-30PDF 48.5 KB
XPYUBX21BE02 MALCover Letter(s)2024-01-30PDF 144 KB
XPYUBX21BE02_AutLetCover Letter(s)2024-01-30PDF 49.2 KB
XPYUBX21BE02_ConReqCover Letter(s)2024-01-30PDF 76.8 KB
XPYUBX21BE02_AutLet-UCover Letter(s)2022-05-12PDF 128 KB
XPYUBX21BE02_ConReq-STCCover Letter(s)2022-05-12PDF 185.6 KB
XPYUBX21BE02_MA-LetterCover Letter(s)2022-05-12PDF 176.4 KB
SAR ReportRF Exposure Info2026-01-14PDF 4.7 MB
XPYUBX21BE02 RFExpRF Exposure Info2024-01-30PDF 648.7 KB
XPYUBX21BE02_RF-ExpRF Exposure Info2022-05-12PDF 653 KB
XPYUBX21BE02_BlkDia Metadata onlyBlock DiagramPDF 408.1 KB
XPYUBX21BE02 Schem Metadata onlySchematicsPDF 738.6 KB
XPYUBX21BE02_Schem Metadata onlySchematicsPDF 671.2 KB
XPYUBX21BE02 OpDes Metadata onlyOperational DescriptionPDF 616.4 KB
XPYUBX21BE02_Ant-Spec Metadata onlyOperational DescriptionPDF 155.5 KB
XPYUBX21BE02_OpDes Metadata onlyOperational DescriptionPDF 174.4 KB
XPYUBX21BE02 ParLst Metadata onlyParts List/Tune Up InfoPDF 299.8 KB
XPYUBX21BE02_PartLst Metadata onlyParts List/Tune Up InfoPDF 454.5 KB
XPYUBX21BE02_TunPro Metadata onlyParts List/Tune Up InfoPDF 168.6 KB

Application Information

Application ID61K1dhDyKip1wbkmOxxxwQ==
Final Action Date2026-01-14
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019077858
ModelUBX21BE02
Frequency Range1850.7-1909.3 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionLTE module
Responsible PartyFilip Kruzela, filip.kruzela@u-blox.com , +46733207170
Non-Technical ContactNathan Grinager, Approve-IT, Inc., team@approve-it.net , 651-247-1678
Test FirmParminder Singh, QAI LABORATORIES LTD., psingh@qai.org , 604-527-8378
TCB Emailtei@timcoengr.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
61K1dhDyKip1wbkmOxxxwQ==2026-01-14Class II permissive change or modification of presently authorized equipment
YdrLxbsdVnco1kYnyWpjLg==2024-01-30Class II permissive change or modification of presently authorized equipment
LyHtfuL+8d4I3IRWkaC/aQ==2022-05-12Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
665.5-695.5 MHz0.1860.1ppm4M80G7D27
695.5 MHz0.1690.1ppm18M0W7D27
699.7-715.3 MHz0.2280.1ppm1M98G7D27
699.7-715.3 MHz0.1870.1ppm1M98W7D27
699.7-715.3 MHz0.1550.1ppm8M96G7D27
699.7-715.3 MHz0.1540.1ppm2M52W7D27
779.5-784.5 MHz0.2130.1ppm8M92G7D27
779.5-784.5 MHz0.180.1ppm4M52W7D27
779.5-784.5 MHz0.160.1ppm2M40W7D27
790.5-795.5 MHz0.1990.1ppm4M50G7D9
790.5-795.5 MHz0.1660.1ppm4M52W7D9
790.5-795.5 MHz0.1590.1ppm8M96G7D9
790.5-795.5 MHz0.1590.1ppm2M40W7D9
824.7-848.3 MHz0.1410.1ppm9M66G7D22H
824.7-848.3 MHz0.1090.1ppm4M52W7D22H
824.7-848.3 MHz0.2070.1ppm1M10G7D22H
824.7 MHz0.180.1ppm1M09W7D22H
1710.7-1779.3 MHz0.2330.1ppm1M14G7D27
1710.7-1779.3 MHz0.1960.1ppm1M98W7D27
1710.7-1779.3 MHz0.1690.1ppm18M0G7D27
1710.7-1779.3 MHz0.1770.1ppm4M80W7D27
1710.7-1754.3 MHz0.2540.1ppm1M98G7D27
1710.7-1754.3 MHz0.2010.1ppm2M72W7D27
1710.7-1754.3 MHz0.1750.1ppm18M0G7D27
1710.7-1754.3 MHz0.1680.1ppm4M16W7D27
1850.7-1909.3 MHz0.1320.1ppm4M80W7D24E

Grants

TCB Grant - Application YdrLxbsdVnco1kYnyWpjLg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 01/30/2024

Application Dated: 01/30/2024
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE02
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1850.7  -  1909.3 0.214 0.1  PM 1M79G7D
24E 1850.7  -  1909.3 0.207 0.1  PM 1M98W7D
24E 1850.7  -  1909.3 0.132 0.1  PM 4M80W7D
27 1710.7  -  1754.3 0.254 0.1  PM 1M98G7D
27 1710.7  -  1754.3 0.201 0.1  PM 2M72W7D
27 1710.7  -  1754.3 0.175 0.1  PM 18M0G7D
27 1710.7  -  1754.3 0.168 0.1  PM 4M16W7D
22H 824.7  -  848.3 0.207 0.1  PM 1M10G7D
22H 824.7  -  824.7 0.18 0.1  PM 1M09W7D
22H 824.7  -  848.3 0.141 0.1  PM 9M66G7D
22H 824.7  -  848.3 0.109 0.1  PM 4M52W7D
27 699.7  -  715.3 0.228 0.1  PM 1M98G7D
27 699.7  -  715.3 0.187 0.1  PM 1M98W7D
27 699.7  -  715.3 0.155 0.1  PM 8M96G7D
27 699.7  -  715.3 0.154 0.1  PM 2M52W7D
27 779.5  -  784.5 0.213 0.1  PM 8M92G7D
27 779.5  -  784.5 0.18 0.1  PM 4M52W7D
27 779.5  -  784.5 0.16 0.1  PM 2M40W7D
27 1710.7  -  1779.3 0.233 0.1  PM 1M14G7D
27 1710.7  -  1779.3 0.196 0.1  PM 1M98W7D
27 1710.7  -  1779.3 0.177 0.1  PM 4M80W7D
27 665.5  -  695.5 0.186 0.1  PM 4M80G7D
27 695.5  -  695.5 0.169 0.1  PM 18M0W7D
90 790.5  -  795.5 0.199 0.1  PM 4M50G7D
90 790.5  -  795.5 0.166 0.1  PM 4M52W7D
90 790.5  -  795.5 0.159 0.1  PM 8M96G7D
90 790.5  -  795.5 0.159 0.1  PM 2M40W7D

Output power listed is conducted. Single Modular Approval. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.5dBi at FDD LTE Band 2; 6.0dBi at FDD LTE Band 4; 10.4dBi at FDD LTE Band 5; 9.7dBi at FDD LTE Band 12; 10.2dBi at FDD LTE Band 13; 10.2dBi at FDD LTE Band 14; 8.7dBi at FDD LTE Band 66 and 9.5dBi at FDD LTE Band 71.

Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2, 4 and 66; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12 and 71; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and 14. C2PC covering pin to pin replacement of component.


EAS Grant - Application YdrLxbsdVnco1kYnyWpjLg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland 		  Date of Grant: 01/30/2024

Application Dated: 01/30/2024
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE02
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1850.7  -  1909.3 0.214 0.1  PM 1M79G7D
24E 1850.7  -  1909.3 0.207 0.1  PM 1M98W7D
24E 1850.7  -  1909.3 0.132 0.1  PM 4M80W7D
27 1710.7  -  1754.3 0.254 0.1  PM 1M98G7D
27 1710.7  -  1754.3 0.201 0.1  PM 2M72W7D
27 1710.7  -  1754.3 0.175 0.1  PM 18M0G7D
27 1710.7  -  1754.3 0.168 0.1  PM 4M16W7D
22H 824.7  -  848.3 0.207 0.1  PM 1M10G7D
22H 824.7  -  824.7 0.18 0.1  PM 1M09W7D
22H 824.7  -  848.3 0.141 0.1  PM 9M66G7D
22H 824.7  -  848.3 0.109 0.1  PM 4M52W7D
27 699.7  -  715.3 0.228 0.1  PM 1M98G7D
27 699.7  -  715.3 0.187 0.1  PM 1M98W7D
27 699.7  -  715.3 0.155 0.1  PM 8M96G7D
27 699.7  -  715.3 0.154 0.1  PM 2M52W7D
27 779.5  -  784.5 0.213 0.1  PM 8M92G7D
27 779.5  -  784.5 0.18 0.1  PM 4M52W7D
27 779.5  -  784.5 0.16 0.1  PM 2M40W7D
27 1710.7  -  1779.3 0.233 0.1  PM 1M14G7D
27 1710.7  -  1779.3 0.196 0.1  PM 1M98W7D
27 1710.7  -  1779.3 0.177 0.1  PM 4M80W7D
27 665.5  -  695.5 0.186 0.1  PM 4M80G7D
27 695.5  -  695.5 0.169 0.1  PM 18M0W7D
90 790.5  -  795.5 0.199 0.1  PM 4M50G7D
90 790.5  -  795.5 0.166 0.1  PM 4M52W7D
90 790.5  -  795.5 0.159 0.1  PM 8M96G7D
90 790.5  -  795.5 0.159 0.1  PM 2M40W7D

Output power listed is conducted. Single Modular Approval. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.5dBi at FDD LTE Band 2; 6.0dBi at FDD LTE Band 4; 10.4dBi at FDD LTE Band 5; 9.7dBi at FDD LTE Band 12; 10.2dBi at FDD LTE Band 13; 10.2dBi at FDD LTE Band 14; 8.7dBi at FDD LTE Band 66 and 9.5dBi at FDD LTE Band 71.

Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2, 4 and 66; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12 and 71; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and 14. C2PC covering pin to pin replacement of component.



TCB Grant - Application LyHtfuL+8d4I3IRWkaC/aQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 05/12/2022

Application Dated: 05/12/2022
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE02
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1850.7  -  1909.3 0.214 0.1  PM 1M79G7D
24E 1850.7  -  1909.3 0.207 0.1  PM 1M98W7D
24E 1850.7  -  1909.3 0.132 0.1  PM 4M80W7D
27 1710.7  -  1754.3 0.254 0.1  PM 1M98G7D
27 1710.7  -  1754.3 0.201 0.1  PM 2M72W7D
27 1710.7  -  1754.3 0.175 0.1  PM 18M0G7D
27 1710.7  -  1754.3 0.168 0.1  PM 4M16W7D
22H 824.7  -  848.3 0.207 0.1  PM 1M10G7D
22H 824.7  -  824.7 0.18 0.1  PM 1M09W7D
22H 824.7  -  848.3 0.141 0.1  PM 9M66G7D
22H 824.7  -  848.3 0.109 0.1  PM 4M52W7D
27 699.7  -  715.3 0.228 0.1  PM 1M98G7D
27 699.7  -  715.3 0.187 0.1  PM 1M98W7D
27 699.7  -  715.3 0.155 0.1  PM 8M96G7D
27 699.7  -  715.3 0.154 0.1  PM 2M52W7D
27 779.5  -  784.5 0.213 0.1  PM 8M92G7D
27 779.5  -  784.5 0.18 0.1  PM 4M52W7D
27 779.5  -  784.5 0.16 0.1  PM 2M40W7D
27 1710.7  -  1779.3 0.233 0.1  PM 1M14G7D
27 1710.7  -  1779.3 0.196 0.1  PM 1M98W7D
27 1710.7  -  1779.3 0.169 0.1  PM 18M0G7D
27 1710.7  -  1779.3 0.177 0.1  PM 4M80W7D
27 665.5  -  695.5 0.186 0.1  PM 4M80G7D
27 695.5  -  695.5 0.169 0.1  PM 18M0W7D
90 790.5  -  795.5 0.199 0.1  PM 4M50G7D
90 790.5  -  795.5 0.166 0.1  PM 4M52W7D
90 790.5  -  795.5 0.159 0.1  PM 8M96G7D
90 790.5  -  795.5 0.159 0.1  PM 2M40W7D

Output power listed is conducted. Single Modular Approval.

The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.5dBi at FDD LTE Band 2; 6.0dBi at FDD LTE Band 4; 10.4dBi at FDD LTE Band 5; 9.7dBi at FDD LTE Band 12; 10.2dBi at FDD LTE Band 13; 10.2dBi at FDD LTE Band 14; 8.7dBi at FDD LTE Band 66 and 9.5dBi at FDD LTE Band 71.

Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2, 4 and 66; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12and 71; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and 14.


EAS Grant - Application LyHtfuL+8d4I3IRWkaC/aQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland 		  Date of Grant: 05/12/2022

Application Dated: 05/12/2022
 
Attention: Giulio Comar , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE02
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1850.7  -  1909.3 0.214 0.1  PM 1M79G7D
24E 1850.7  -  1909.3 0.207 0.1  PM 1M98W7D
24E 1850.7  -  1909.3 0.132 0.1  PM 4M80W7D
27 1710.7  -  1754.3 0.254 0.1  PM 1M98G7D
27 1710.7  -  1754.3 0.201 0.1  PM 2M72W7D
27 1710.7  -  1754.3 0.175 0.1  PM 18M0G7D
27 1710.7  -  1754.3 0.168 0.1  PM 4M16W7D
22H 824.7  -  848.3 0.207 0.1  PM 1M10G7D
22H 824.7  -  824.7 0.18 0.1  PM 1M09W7D
22H 824.7  -  848.3 0.141 0.1  PM 9M66G7D
22H 824.7  -  848.3 0.109 0.1  PM 4M52W7D
27 699.7  -  715.3 0.228 0.1  PM 1M98G7D
27 699.7  -  715.3 0.187 0.1  PM 1M98W7D
27 699.7  -  715.3 0.155 0.1  PM 8M96G7D
27 699.7  -  715.3 0.154 0.1  PM 2M52W7D
27 779.5  -  784.5 0.213 0.1  PM 8M92G7D
27 779.5  -  784.5 0.18 0.1  PM 4M52W7D
27 779.5  -  784.5 0.16 0.1  PM 2M40W7D
27 1710.7  -  1779.3 0.233 0.1  PM 1M14G7D
27 1710.7  -  1779.3 0.196 0.1  PM 1M98W7D
27 1710.7  -  1779.3 0.169 0.1  PM 18M0G7D
27 1710.7  -  1779.3 0.177 0.1  PM 4M80W7D
27 665.5  -  695.5 0.186 0.1  PM 4M80G7D
27 695.5  -  695.5 0.169 0.1  PM 18M0W7D
90 790.5  -  795.5 0.199 0.1  PM 4M50G7D
90 790.5  -  795.5 0.166 0.1  PM 4M52W7D
90 790.5  -  795.5 0.159 0.1  PM 8M96G7D
90 790.5  -  795.5 0.159 0.1  PM 2M40W7D

Output power listed is conducted. Single Modular Approval.

The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.5dBi at FDD LTE Band 2; 6.0dBi at FDD LTE Band 4; 10.4dBi at FDD LTE Band 5; 9.7dBi at FDD LTE Band 12; 10.2dBi at FDD LTE Band 13; 10.2dBi at FDD LTE Band 14; 8.7dBi at FDD LTE Band 66 and 9.5dBi at FDD LTE Band 71.

Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2, 4 and 66; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12and 71; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and 14.



TCB Grant - Application 61K1dhDyKip1wbkmOxxxwQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 01/14/2026

Application Dated: 01/14/2026
u-blox AG
Zuercherstrasse 68
Thalwil, Ch-8800
Switzerland
 
Attention: Filip Kruzela , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XPYUBX21BE02
Name of Grantee:  u-blox AG
Equipment Class: PCS Licensed Transmitter
Notes: LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1850.7  -  1909.3 0.214 0.1  PM 1M79G7D
24E 1850.7  -  1909.3 0.207 0.1  PM 1M98W7D
24E 1850.7  -  1909.3 0.132 0.1  PM 4M80W7D
27 1710.7  -  1754.3 0.254 0.1  PM 1M98G7D
27 1710.7  -  1754.3 0.201 0.1  PM 2M72W7D
27 1710.7  -  1754.3 0.175 0.1  PM 18M0G7D
27 1710.7  -  1754.3 0.168 0.1  PM 4M16W7D
22H 824.7  -  848.3 0.207 0.1  PM 1M10G7D
22H 824.7  -  848.3 0.18 0.1  PM 1M09W7D
22H 824.7  -  848.3 0.141 0.1  PM 9M66G7D
22H 824.7  -  848.3 0.109 0.1  PM 4M52W7D
27 699.7  -  715.3 0.228 0.1  PM 1M98G7D
27 699.7  -  715.3 0.187 0.1  PM 1M98W7D
27 699.7  -  715.3 0.155 0.1  PM 8M96G7D
27 699.7  -  715.3 0.154 0.1  PM 2M52W7D
27 779.5  -  784.5 0.213 0.1  PM 8M92G7D
27 779.5  -  784.5 0.18 0.1  PM 4M52W7D
27 779.5  -  784.5 0.16 0.1  PM 2M40W7D
27 1710.7  -  1779.3 0.233 0.1  PM 1M14G7D
27 1710.7  -  1779.3 0.196 0.1  PM 1M98W7D
27 1710.7  -  1779.3 0.177 0.1  PM 4M80W7D
27 665.5  -  695.5 0.186 0.1  PM 4M80G7D
27 673.0  -  688.0 0.169 0.1  PM 18M0W7D
90 790.5  -  795.5 0.199 0.1  PM 4M50G7D
90 790.5  -  795.5 0.166 0.1  PM 4M52W7D
90 790.5  -  795.5 0.159 0.1  PM 8M96G7D
90 790.5  -  795.5 0.159 0.1  PM 2M40W7D

Output power listed is conducted. Single Modular Approval. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.5dBi at FDD LTE Band 2; 6.0dBi at FDD LTE Band 4; 10.4dBi at FDD LTE Band 5; 9.7dBi at FDD LTE Band 12; 10.2dBi at FDD LTE Band 13; 10.2dBi at FDD LTE Band 14; 8.7dBi at FDD LTE Band 66 and 9.5dBi at FDD LTE Band 71.

Integration not consistent with these conditions will entail additional testing and authorization process. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device supports bandwidth modes of 1.4, 3, 5, 10, 15 and 20 MHz for FDD LTE Bands 2, 4 and 66; bandwidth modes of 1.4, 3, 5 and 10 MHz for FDD LTE Bands 5, 12 and 71; bandwidth modes of 5 and 10 MHz for FDD LTE Band 13 and 14.

Class II Permissive Change: Authorizes portable use when integrated into Blackline Safety Corp model G8C-01-NA2 gas detector. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories (belt-clips) tested for this filing,. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 0.52 W/kg, 0.20 W/kg and 0.57 W/kg, respectively.