FCC ID XPYVERAP174
Host-based V2X transceiver module
by u-blox AG
Grantee Code: XPY Product Code: VERAP174
Latest application date: 2019-03-05
FCC ID Device Details
| FCC ID | XPYVERAP174 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XPY |
| Product Code | VERAP174 |
| Applicant Business | u-blox AG 🇨🇭 |
| Related Domains |  u-blox.com |
| Equipment Class | Host-based V2X transceiver module |
| Test Firm | 7layers GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5860-5920 MHz | Class II permissive change or modification of presently authorized equipment | 2019-03-05 |
| 5860-5920 MHz | Original Equipment | 2018-07-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Antenna trace layout | Users Manual | 2018-07-10 | PDF 317.4 KB |
| User Manual | Users Manual | 2018-07-10 | PDF 1.4 MB |
| Internal Photos | Internal Photos | 2018-07-10 | PDF 232.9 KB |
| External Photos | External Photos | 2018-07-10 | PDF 232.9 KB |
| Label | ID Label/Location Info | 2018-07-10 | PDF 208 KB |
| Test Set- up Photos | Test Setup Photos | 2019-03-05 | PDF 837.3 KB |
| Test Photos | Test Setup Photos | 2018-07-10 | PDF 549.7 KB |
| Test Report | Test Report | 2019-03-05 | PDF 1.9 MB |
| Test Report 90M | Test Report | 2018-07-10 | PDF 3.3 MB |
| Test Report 95L | Test Report | 2018-07-10 | PDF 3.2 MB |
| Authorization Letter 1 | Cover Letter(s) | 2019-03-05 | PDF 111.5 KB |
| Authorization Letter 2 | Cover Letter(s) | 2019-03-05 | PDF 38.3 KB |
| Confidentiality Request | Cover Letter(s) | 2019-03-05 | PDF 41.8 KB |
| Cover Letter | Cover Letter(s) | 2019-03-05 | PDF 38.9 KB |
| Modular Approval Checklist | Cover Letter(s) | 2019-03-05 | PDF 97.7 KB |
| ASTM Standard compliance | Cover Letter(s) | 2018-07-10 | PDF 68 KB |
| Agent Authorization | Cover Letter(s) | 2018-07-10 | PDF 39.7 KB |
| Confidentiality Request | Cover Letter(s) | 2018-07-10 | PDF 43.2 KB |
| Modular Approval Letter | Cover Letter(s) | 2018-07-10 | PDF 120 KB |
| MPE Report | RF Exposure Info | 2019-03-05 | PDF 177.7 KB |
| Tune- Up Tolerance Declaration | Parts List/Tune Up Info | 2019-03-05 | PDF 68.2 KB |
| RF Exposure | RF Exposure Info | 2018-07-10 | PDF 177.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 136.5 KB | |
| Schematics Metadata only | Schematics | PDF 500.8 KB | |
| Operation Description Metadata only | Operational Description | PDF 146.3 KB | |
| Operational Description Metadata only | Operational Description | PDF 758.2 KB | |
| TCB Questions and Answers Metadata only | Operational Description | PDF 107.2 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 43.3 KB | |
| Tune up Metadata only | Parts List/Tune Up Info | PDF 68.2 KB |
Application Information
| Application ID | Ru3pSmUA4n7wnszrLz4fJg== |
|---|---|
| Final Action Date | 2019-03-05 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019077858 |
| Model | VERAP174 |
| Frequency Range | 5860-5920 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Host-based V2X transceiver module |
| Responsible Party | Giulio Comar, Certification Manager, giulio.comar@u-blox.com , +390402529400 |
| Agent | Imad Imad Imad, 7layers GmbH, imad.hjije@7layers.com  |
| Technical Contact | Giulio Comar, u-blox AG, giulio.comar@u-blox.com |
| Test Firm | Bernhard Retka, 7layers GmbH, Bernhard.Retka@7layers.com , 0049 2102 749 452 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | B4: Microwave, Millimeter Wave Band and Citizens Broadband Radio Services equipment in 47 CFR Parts 25, 30, 74, 90, 95, 96, 97, 101 (all above 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change Output power listed is conducted, aggregate of transmitter ports. This module is certified for DSRCS operation in on-board and roadside use. It is certified for mobile use where the transmitter antenna is more than 20 cm from all persons. Co-location with other transmitters requires the use of FCC multi-transmitter product procedures. This module must only be used with a host antenna circuit trace layout design in strict compliance with the installation instructions provided. Installers must be provided with installation and operation instructions for satisfying RF exposure compliance. This Class II Permissive Change authorizes a new circuit trace layout and antenna for use in the specific host identified in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Ru3pSmUA4n7wnszrLz4fJg== | 2019-03-05 | Class II permissive change or modification of presently authorized equipment |
| wD+fMb0eYdbeA26PuTAVug== | 2018-07-10 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application wD+fMb0eYdbeA26PuTAVug==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/10/2018 Application Dated: 07/10/2018 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYVERAP174 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Host-based V2X transceiver module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90, 95L | 5860.0 - 5920.0 | 0.1905 | 1.5 PM | 8M01D1D |
| Output power listed is conducted, aggregate of transmitter ports. This module is certified for DSRCS operation in on-board and roadside use. It is certified for mobile use where the transmitter antenna is more than 20 cm from all persons. Co-location with other transmitters requires the use of FCC multi-transmitter product procedures. This module must only be used with a host antenna circuit trace layout design in strict compliance with the installation instructions provided. Installers must be provided with installation and operation instructions for satisfying RF exposure compliance. |
EAS Grant - Application wD+fMb0eYdbeA26PuTAVug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 07/10/2018 Application Dated: 07/10/2018 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYVERAP174 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Host-based V2X transceiver module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90, 95L | 5860.0 - 5920.0 | 0.1905 | 1.5 PM | 8M01D1D |
| Output power listed is conducted, aggregate of transmitter ports. This module is certified for DSRCS operation in on-board and roadside use. It is certified for mobile use where the transmitter antenna is more than 20 cm from all persons. Co-location with other transmitters requires the use of FCC multi-transmitter product procedures. This module must only be used with a host antenna circuit trace layout design in strict compliance with the installation instructions provided. Installers must be provided with installation and operation instructions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/05/2019 Application Dated: 03/05/2019 |
| u-blox AG |
| Zuercherstrasse 68 |
| Thalwil, Ch-8800 Switzerland |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYVERAP174 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Host-based V2X transceiver module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 90, 95L | 5860.0 - 5920.0 | 0.0955 | 1.5 PM | 8M01D1D |
| Class II Permissive Change Output power listed is conducted, aggregate of transmitter ports. This module is certified for DSRCS operation in on-board and roadside use. It is certified for mobile use where the transmitter antenna is more than 20 cm from all persons. Co-location with other transmitters requires the use of FCC multi-transmitter product procedures. This module must only be used with a host antenna circuit trace layout design in strict compliance with the installation instructions provided. Installers must be provided with installation and operation instructions for satisfying RF exposure compliance. This Class II Permissive Change authorizes a new circuit trace layout and antenna for use in the specific host identified in this filing. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Ru3pSmUA4n7wnszrLz4fJg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
u-blox AG Zuercherstrasse 68 Thalwil, Ch-8800 Switzerland |
Date of Grant: 03/05/2019 Application Dated: 03/05/2019 |
| Attention: Giulio Comar , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XPYVERAP174 |
| Name of Grantee: | u-blox AG |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Host-based V2X transceiver module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 90, 95L | 5860.0 - 5920.0 | 0.0955 | 1.5 PM | 8M01D1D |
| Class II Permissive Change Output power listed is conducted, aggregate of transmitter ports. This module is certified for DSRCS operation in on-board and roadside use. It is certified for mobile use where the transmitter antenna is more than 20 cm from all persons. Co-location with other transmitters requires the use of FCC multi-transmitter product procedures. This module must only be used with a host antenna circuit trace layout design in strict compliance with the installation instructions provided. Installers must be provided with installation and operation instructions for satisfying RF exposure compliance. This Class II Permissive Change authorizes a new circuit trace layout and antenna for use in the specific host identified in this filing. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |