FCC ID XSL00000UHFISTC01

Handfree Mini Reader Module

by Industrial Technology Research Institute

Grantee Code: XSL   Product Code: 00000UHFISTC01
Latest application date: 2009-11-26

FCC ID Device Details

FCC IDXSL00000UHFISTC01
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXSL
Product Code00000UHFISTC01
Applicant BusinessIndustrial Technology Research Institute 🇹🇼
Related Domains etc.org.tw
Equipment ClassHandfree Mini Reader Module
Test FirmElectronics Testing Center, Taiwan

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.75-927.25 MHzOriginal Equipment2009-11-26

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2009-11-26PDF 861.1 KB
Internal photosInternal Photos2009-11-26PDF 362.9 KB
External photosExternal Photos2009-11-26PDF 178 KB
Label format and locationID Label/Location Info2009-11-26PDF 76.7 KB
Antenna specificationOperational Description2009-11-26PDF 281.8 KB
Operational descriptionOperational Description2009-11-26PDF 1 MB
Test setup photosTest Setup Photos2009-11-26PDF 300 KB
Test reportTest Report2009-11-26PDF 328.1 KB
Modular approval request letterCover Letter(s)2009-11-26PDF 161.7 KB
Request for confidentialityCover Letter(s)2009-11-26PDF 421.6 KB
MPE calculationRF Exposure Info2009-11-26PDF 98 KB

Application Information

Application IDdyp/fuf4vyYxaeCBR9Y1ng==
Final Action Date2009-11-26
Application PurposeOriginal Equipment
Applicant FRN0019154616
Model00000UHFISTC01
Frequency Range902.75-927.25 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionHandfree Mini Reader Module
Responsible PartyBruce Lai, Engineer, hsieh@etc.org.tw , 886-3-5915956
Test FirmWin-Po Tsai, Electronics Testing Center, Taiwan, winpo@etc.org.tw , 886-3-3276172
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
dyp/fuf4vyYxaeCBR9Y1ng==2009-11-26Original Equipment

Equipment Authorization

FrequencyOutputRules
902.75-927.25 MHz0.920000015C

Grants

TCB Grant - Application dyp/fuf4vyYxaeCBR9Y1ng==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 11/26/2009

Application Dated: 11/26/2009
Industrial Technology Research Institute
Rm.225, Bldg. 52, 195, Sec.4, Chung Hsing Rd,
Chutung, Hsinchu, 31040
Taiwan
 
Attention: Bruce Lai , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XSL00000UHFISTC01
Name of Grantee:  Industrial Technology Research Institute
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Handfree Mini Reader Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 0.92  

Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application dyp/fuf4vyYxaeCBR9Y1ng==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Industrial Technology Research Institute
Rm.225, Bldg. 52, 195, Sec.4, Chung Hsing Rd, P.O. Box ,
Chutung, Hsinchu, 31040
Taiwan
  Date of Grant: 11/26/2009

Application Dated: 11/26/2009
 
Attention: Bruce Lai , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XSL00000UHFISTC01
Name of Grantee:  Industrial Technology Research Institute
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Handfree Mini Reader Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 0.92  

Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: