FCC ID XT5-513VRC
Wireless Transmitter with Qualcomm WCN3630 Chip
by Technologies Humanware Inc.
Grantee Code: XT5 Product Code: 513VRC
Latest application date: 2019-08-14
FCC ID Device Details
| FCC ID | XT5-513VRC |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XT5 |
| Product Code | 513VRC |
| Applicant Business | Technologies Humanware Inc. 🇨🇦 |
| Related Domains |  humanware.com |
| Equipment Class | Wireless Transmitter with Qualcomm WCN3630 Chip |
| Test Firm | QAI LABORATORIES LTD. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-08-14 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-08-14 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AFDI-ITCOQ410S Grant Date: 07/22/2016 | 2019-07-11 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AFDI-ITCOQ410S Grant Date: 07/22/2016 | 2019-07-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2019-08-14 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2019-08-14 | PDF 258 KB |
| External Photos | External Photos | 2019-08-14 | PDF 277 KB |
| External Photos | External Photos | 2019-07-11 | PDF 258 KB |
| Label and Label Location | ID Label/Location Info | 2019-08-14 | PDF 2.2 MB |
| Block Diagram | Block Diagram | 2019-08-14 | PDF 272.6 KB |
| Operational Description | Operational Description | 2019-08-14 | PDF 5.2 MB |
| Cover Letters | Cover Letter(s) | 2019-08-14 | PDF 316.4 KB |
| RF Exposure info | RF Exposure Info | 2019-08-14 | PDF 2.8 MB |
Application Information
| Application ID | gD90v68PBVE98uZ2M/5NIA== |
|---|---|
| Final Action Date | 2019-08-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019188978 |
| Model | 513VRC |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless Transmitter with Qualcomm WCN3630 Chip |
| Responsible Party | Louis-Philippe Masse, VP Products Innovation, louis-philippe.masse@humanware.com , 450-463-1717 |
| Test Firm | Parminder Singh, QAI LABORATORIES LTD., psingh@qai.org  , 604-527-8378 |
| TCB Email | Stuart.Beck@nemko.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to integrate this module into host platform, model 513VRC. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Users and installers must be provided with device operating conditions for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, are 0.86 W/kg, 0.90 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| gD90v68PBVE98uZ2M/5NIA== | 2019-08-14 | Class II permissive change or modification of presently authorized equipment |
| 65eQ+eT0ujIZGdSl/Ws1iQ== | 2019-08-14 | Class II permissive change or modification of presently authorized equipment |
| WLQYGwydnv8xmeYNxfecsg== | 2019-07-11 | Change in identification of presently authorized equipment. Original FCC ID: 2AFDI-ITCOQ410S Grant Date: 07/22/2016 |
| W03cuL4zAEYTfTKycBIBiA== | 2019-07-11 | Change in identification of presently authorized equipment. Original FCC ID: 2AFDI-ITCOQ410S Grant Date: 07/22/2016 |
Equipment Authorization
Grants
TCB Grant - Application WLQYGwydnv8xmeYNxfecsg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 07/11/2019 Application Dated: 07/11/2019 |
| Technologies Humanware Inc. |
| 1800, Jean-Berchmans-Michaud |
| Drummondville, QC, J2C 7G7 Canada |
| Attention: Louis-Philippe Masse , VP Products Innovation |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XT5-513VRC |
| Name of Grantee: | Technologies Humanware Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Transmitter with Qualcomm WCN3630 Chip |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Users and installers must be provided with device operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application WLQYGwydnv8xmeYNxfecsg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Technologies Humanware Inc. 1800, Jean-Berchmans-Michaud Drummondville, QC, J2C 7G7 Canada |
Date of Grant: 07/11/2019 Application Dated: 07/11/2019 |
| Attention: Louis-Philippe Masse , VP Products Innovation |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XT5-513VRC |
| Name of Grantee: | Technologies Humanware Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Transmitter with Qualcomm WCN3630 Chip |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Users and installers must be provided with device operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 07/11/2019 Application Dated: 07/11/2019 |
| Technologies Humanware Inc. |
| 1800, Jean-Berchmans-Michaud |
| Drummondville, QC, J2C 7G7 Canada |
| Attention: Louis-Philippe Masse , VP Products Innovation |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XT5-513VRC |
| Name of Grantee: | Technologies Humanware Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Transmitter with Qualcomm WCN3630 Chip |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Users and installers must be provided with device operating conditions for satisfying RF exposure compliance. This device has a 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application W03cuL4zAEYTfTKycBIBiA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Technologies Humanware Inc. 1800, Jean-Berchmans-Michaud Drummondville, QC, J2C 7G7 Canada |
Date of Grant: 07/11/2019 Application Dated: 07/11/2019 |
| Attention: Louis-Philippe Masse , VP Products Innovation |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XT5-513VRC |
| Name of Grantee: | Technologies Humanware Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Transmitter with Qualcomm WCN3630 Chip |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Users and installers must be provided with device operating conditions for satisfying RF exposure compliance. This device has a 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 08/14/2019 Application Dated: 08/13/2019 |
| Technologies Humanware Inc. |
| 1800, Jean-Berchmans-Michaud |
| Drummondville, QC, J2C 7G7 Canada |
| Attention: Louis-Philippe Masse , VP Products Innovation |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XT5-513VRC |
| Name of Grantee: | Technologies Humanware Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Transmitter with Qualcomm WCN3630 Chip |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Class II Permissive Change to integrate this module into host platform, model 513VRC. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Users and installers must be provided with device operating conditions for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, are 0.86 W/kg, 0.90 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gD90v68PBVE98uZ2M/5NIA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Technologies Humanware Inc. 1800, Jean-Berchmans-Michaud Drummondville, QC, J2C 7G7 Canada |
Date of Grant: 08/14/2019 Application Dated: 08/13/2019 |
| Attention: Louis-Philippe Masse , VP Products Innovation |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XT5-513VRC |
| Name of Grantee: | Technologies Humanware Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Transmitter with Qualcomm WCN3630 Chip |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Class II Permissive Change to integrate this module into host platform, model 513VRC. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Users and installers must be provided with device operating conditions for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, are 0.86 W/kg, 0.90 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 08/14/2019 Application Dated: 08/13/2019 |
| Technologies Humanware Inc. |
| 1800, Jean-Berchmans-Michaud |
| Drummondville, QC, J2C 7G7 Canada |
| Attention: Louis-Philippe Masse , VP Products Innovation |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XT5-513VRC |
| Name of Grantee: | Technologies Humanware Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Transmitter with Qualcomm WCN3630 Chip |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Class II Permissive Change to integrate this module into host platform, model 513VRC. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Users and installers must be provided with device operating conditions for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, are 0.86 W/kg, 0.90W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 65eQ+eT0ujIZGdSl/Ws1iQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Technologies Humanware Inc. 1800, Jean-Berchmans-Michaud Drummondville, QC, J2C 7G7 Canada |
Date of Grant: 08/14/2019 Application Dated: 08/13/2019 |
| Attention: Louis-Philippe Masse , VP Products Innovation |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XT5-513VRC |
| Name of Grantee: | Technologies Humanware Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Transmitter with Qualcomm WCN3630 Chip |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Class II Permissive Change to integrate this module into host platform, model 513VRC. Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Users and installers must be provided with device operating conditions for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, are 0.86 W/kg, 0.90W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |