1. FCC ID
  2. XTE
  3. XTE-ULPU100

FCC ID XTE-ULPU100

On-Ramp Wireless microNode

by Ingenu

Grantee Code: XTE   Product Code: ULPU100
Latest application date: 2013-07-29

FCC ID Device Details

FCC IDXTE-ULPU100
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXTE
Product CodeULPU100
Applicant BusinessIngenu 🇺🇸
Related Domains onrampwireless.com
Equipment ClassOn-Ramp Wireless microNode
Test FirmTUV SUD America, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2400-2475.63 MHzClass II permissive change or modification of presently authorized equipment2013-07-29
2400-2475.63 MHzClass II permissive change or modification of presently authorized equipment2012-09-06
2400-2475.63 MHzOriginal Equipment2012-03-15

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2012-09-11PDF 1 MB
Internal Pictures (On Ramp)Internal Photos2013-07-29PDF 1.9 MB
Exhibit 09 Internal PhotosInternal Photos2013-03-01PDF 241.3 KB
Internal photosInternal Photos2012-09-11PDF 244.5 KB
External Pictures (On Ramp)External Photos2013-07-29PDF 625 KB
External photosExternal Photos2012-09-11PDF 131.3 KB
TRN-2014 External Label LocationID Label/Location Info2013-07-29PDF 99.8 KB
TRN-2014_LabelID Label/Location Info2013-07-29PDF 32.8 KB
Exhibit 01 ID LabelID Label/Location Info2012-09-06PDF 413.2 KB
Label & LocationID Label/Location Info2012-03-15PDF 413.2 KB
Test Set Up Pictures (On Ramp)Test Setup Photos2013-07-29PDF 2.5 MB
Exhibit 07 Test Setup PhotosTest Setup Photos2013-03-01PDF 185.1 KB
Set up photosTest Setup Photos2012-09-11PDF 1.4 MB
SC1300586A_TRN-2014_FCC Subpart B and ICES-003 Class B Test Report.Test Report2013-07-29PDF 3.9 MB
SC1300586B_TRN-2014_FCC 15.247 & RSS210Test Report2013-07-29PDF 3.1 MB
Exhibit 06 Test ReportTest Report2012-09-06PDF 905.7 KB
Part 15 reportTest Report2012-03-15PDF 2.5 MB
XTE-TRN-2014 - On-Ramp Wireless Attestation Letter2Attestation Statements2013-07-29PDF 147.9 KB
XTE-TRN-2014 - On-Ramp Wireless Attestation Letter_1Attestation Statements2013-07-29PDF 147.7 KB
XTE-TRN-2014 - On-Ramp Wireless Attestation Letter_1Cover Letter(s)2013-07-29PDF 147.7 KB
Exhibit 02 Attestation StatementAttestation Statements2012-09-06PDF 102.3 KB
Attestation statementAttestation Statements2012-03-15PDF 137.1 KB
Exhibit 13 Cover LettersCover Letter(s)2012-09-06PDF 127.6 KB
Confidentiality letterCover Letter(s)2012-03-15PDF 155.3 KB
Modular approval letterCover Letter(s)2012-03-15PDF 243.7 KB
Representative authorisationCover Letter(s)2012-03-15PDF 137.4 KB
MPE ConductedRF Exposure Info2013-07-29PDF 20 KB

Application Information

Application IDNRRJsh1MV3qX5l4u2zPusg==
Final Action Date2013-07-29
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019103472
Model-ULPU100
Frequency Range2400-2475.63 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionOn-Ramp Wireless microNode
Responsible PartyJason Wilson, VP Product Management, jason.wilson@onrampwireless.com , 858-592-6008
Test FirmChip Fleury, TUV SUD America, Inc., cfleury@tuvam.com , 1-858-678-1439
TCB Emailnathan.emery@babt.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive change as described in this filing. Single Modular Approval. Power Output is conducted. This module must only be installed by the OEM or an OEM integrator. This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures.

Applications

Application IDDatePurpose
NRRJsh1MV3qX5l4u2zPusg==2013-07-29Class II permissive change or modification of presently authorized equipment
OpQhQE4zPWHmIoUZlfR5kQ==2012-09-06Class II permissive change or modification of presently authorized equipment
3ux8Mm+GkjUmmP51CuiaNA==2012-03-15Original Equipment

Equipment Authorization

FrequencyOutputRules
2400-2475.63 MHz0.138000015C

Grants

TCB Grant - Application OpQhQE4zPWHmIoUZlfR5kQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom 		Date of Grant: 09/06/2012

Application Dated: 09/06/2012
On-Ramp Wireless
10920 Via Frontera
Suite 200
San Diego, CA 92127
 
Attention: Jason Wilson , VP Product Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XTE-ULPU100
Name of Grantee:  On-Ramp Wireless
Equipment Class: Digital Transmission System
Notes: On-Ramp Wireless microNode
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2475.63 0.138  

Class II Permissive change as described in this filing. Single Modular Approval. Power Output is conducted. This module must only be installed by the OEM or an OEM integrator. This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures.

EAS Grant - Application OpQhQE4zPWHmIoUZlfR5kQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

On-Ramp Wireless
10920 Via Frontera Suite 200P.O. Box ,
San Diego, CA 92127
United States 		  Date of Grant: 09/06/2012

Application Dated: 09/06/2012
 
Attention: Jason Wilson , VP Product Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XTE-ULPU100
Name of Grantee:  On-Ramp Wireless
Equipment Class: Digital Transmission System
Notes: On-Ramp Wireless microNode
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2475.63 0.138  

Class II Permissive change as described in this filing. Single Modular Approval. Power Output is conducted. This module must only be installed by the OEM or an OEM integrator. This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures.



TCB Grant - Application NRRJsh1MV3qX5l4u2zPusg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom 		Date of Grant: 07/29/2013

Application Dated: 07/29/2013
On-Ramp Wireless
10920 Via Frontera
Suite 200
San Diego, CA 92127
 
Attention: Jason Wilson , VP Product Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XTE-ULPU100
Name of Grantee:  On-Ramp Wireless
Equipment Class: Digital Transmission System
Notes: On-Ramp Wireless microNode
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2475.63 0.138  

Class II Permissive change as described in this filing.

Single Modular Approval. Power Output is conducted. This module must only be installed by the OEM or an OEM integrator. This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures.


EAS Grant - Application NRRJsh1MV3qX5l4u2zPusg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

On-Ramp Wireless
10920 Via Frontera Suite 200P.O. Box ,
San Diego, CA 92127
United States 		  Date of Grant: 07/29/2013

Application Dated: 07/29/2013
 
Attention: Jason Wilson , VP Product Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XTE-ULPU100
Name of Grantee:  On-Ramp Wireless
Equipment Class: Digital Transmission System
Notes: On-Ramp Wireless microNode
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2475.63 0.138  

Class II Permissive change as described in this filing.

Single Modular Approval. Power Output is conducted. This module must only be installed by the OEM or an OEM integrator. This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures.



TCB Grant - Application 3ux8Mm+GkjUmmP51CuiaNA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom 		Date of Grant: 03/15/2012

Application Dated: 03/15/2012
On-Ramp Wireless
10920 Via Frontera
Suite 200
San Diego, CA 92127
 
Attention: Jason Wilson , VP Product Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XTE-ULPU100
Name of Grantee:  On-Ramp Wireless
Equipment Class: Digital Transmission System
Notes: On-Ramp Wireless microNode
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2475.63 0.138  

Single Modular Approval. Power Output is conducted. This module must only be installed by the OEM or an OEM integrator. This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures.

EAS Grant - Application 3ux8Mm+GkjUmmP51CuiaNA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

On-Ramp Wireless
10920 Via Frontera Suite 200P.O. Box ,
San Diego, CA 92127
United States 		  Date of Grant: 03/15/2012

Application Dated: 03/15/2012
 
Attention: Jason Wilson , VP Product Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XTE-ULPU100
Name of Grantee:  On-Ramp Wireless
Equipment Class: Digital Transmission System
Notes: On-Ramp Wireless microNode
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2475.63 0.138  

Single Modular Approval. Power Output is conducted. This module must only be installed by the OEM or an OEM integrator. This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures.



Mail To: