FCC ID XTLCMABZ
LoRa module
by OCEASOFT
Grantee Code: XTL Product Code: CMABZ
Latest application date: 2020-03-20
FCC ID Device Details
| FCC ID | XTLCMABZ |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XTL |
| Product Code | CMABZ |
| Applicant Business | OCEASOFT 🇫🇷 |
| Related Domains |  oceasoft.com |
| Equipment Class | LoRa module |
| Test Firm | EMITECH Montpellier |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.3-914.9 MHz | Class II permissive change or modification of presently authorized equipment | 2020-03-20 |
| 902.3-914.9 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYCMABZ Grant Date: 09/28/2018 | 2020-01-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2020-03-20 | PDF 653.1 KB |
| external photos | External Photos | 2020-03-20 | PDF 372.1 KB |
| external photos | External Photos | 2020-01-05 | PDF 141.8 KB |
| Label Location | ID Label/Location Info | 2020-03-20 | PDF 304.6 KB |
| Label Sample | ID Label/Location Info | 2020-03-20 | PDF 28.4 KB |
| label&location Metadata only | ID Label/Location Info | 2020-03-20 | PDF 304.6 KB |
| label location | ID Label/Location Info | 2020-01-05 | PDF 495.9 KB |
| label sample | ID Label/Location Info | 2020-01-05 | PDF 33.4 KB |
| block diagram | Block Diagram | 2020-03-20 | PDF 249.4 KB |
| test setup photos | Test Setup Photos | 2020-03-20 | PDF 527.5 KB |
| test report | Test Report | 2020-03-20 | PDF 2.9 MB |
| POA | Cover Letter(s) | 2020-03-20 | PDF 167.5 KB |
| class II permissive change letter | Cover Letter(s) | 2020-03-20 | PDF 67.8 KB |
| POA | Cover Letter(s) | 2020-01-05 | PDF 330.8 KB |
| cover letter | Cover Letter(s) | 2020-01-05 | PDF 126.7 KB |
Application Information
| Application ID | H6/uy2nvI+uZA59ShPI45A== |
|---|---|
| Final Action Date | 2020-03-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019173269 |
| Model | CMABZ |
| Frequency Range | 902.3-914.9 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | LoRa module |
| Responsible Party | Laurent ROUSSEAU, Mr, infos@oceasoft.com , +33499136730 |
| Test Firm | Olivier HEYER, EMITECH Montpellier, o.heyer@emitech-group.com  , 33-4-67-871102 |
| TCB Email | TEI@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Limited Single modular approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125 kHz and 500 kHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. C2PC: This C2PC is to integrate the module into the LorMur Daughter Card, replacing the on-board SMA connector by a UFL one, second, adding a UFL/RP-SMA cable to feed the RP-SMA antenna and last, changing the matching circuit design. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| H6/uy2nvI+uZA59ShPI45A== | 2020-03-20 | Class II permissive change or modification of presently authorized equipment |
| i1Jn+hyTfb3ABPYsQycyKg== | 2020-01-05 | Change in identification of presently authorized equipment. Original FCC ID: VPYCMABZ Grant Date: 09/28/2018 |
Equipment Authorization
Grants
TCB Grant - Application i1Jn+hyTfb3ABPYsQycyKg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/05/2020 Application Dated: 01/05/2020 |
| OCEASOFT |
| 720 rue Louis Lepine |
| MONTPELLIER, 34000 France |
| Attention: Laurent ROUSSEAU , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XTLCMABZ |
| Name of Grantee: | OCEASOFT |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRa module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Output power listed is conducted. Limited Single modular approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125 kHz and 500 kHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
EAS Grant - Application i1Jn+hyTfb3ABPYsQycyKg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
OCEASOFT 720 rue Louis Lepine MONTPELLIER, 34000 France |
Date of Grant: 01/05/2020 Application Dated: 01/05/2020 |
| Attention: Laurent ROUSSEAU , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XTLCMABZ |
| Name of Grantee: | OCEASOFT |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRa module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Output power listed is conducted. Limited Single modular approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125 kHz and 500 kHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/20/2020 Application Dated: 03/14/2020 |
| OCEASOFT |
| 720 rue Louis Lepine |
| MONTPELLIER, 34000 France |
| Attention: Laurent ROUSSEAU , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XTLCMABZ |
| Name of Grantee: | OCEASOFT |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRa module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0132 | |||
| 15C | 903.0 - 914.2 | 0.0132 |
| Output power listed is conducted. Limited Single modular approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125 kHz and 500 kHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. C2PC: This C2PC is to integrate the module into the LorMur Daughter Card, replacing the on-board SMA connector by a UFL one, second, adding a UFL/RP-SMA cable to feed the RP-SMA antenna and last, changing the matching circuit design. |
EAS Grant - Application H6/uy2nvI+uZA59ShPI45A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
OCEASOFT 720 rue Louis Lepine MONTPELLIER, 34000 France |
Date of Grant: 03/20/2020 Application Dated: 03/14/2020 |
| Attention: Laurent ROUSSEAU , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XTLCMABZ |
| Name of Grantee: | OCEASOFT |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRa module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0132 | |||
| 15C | 903.0 - 914.2 | 0.0132 |
| Output power listed is conducted. Limited Single modular approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125 kHz and 500 kHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. C2PC: This C2PC is to integrate the module into the LorMur Daughter Card, replacing the on-board SMA connector by a UFL one, second, adding a UFL/RP-SMA cable to feed the RP-SMA antenna and last, changing the matching circuit design. |
| Mail To: |