FCC ID XU9-FW2770P
CDMA REV A MINIPCIE DATA MODULE
by Fusion Wireless
Grantee Code: XU9 Product Code: FW2770P
Latest application date: 2011-09-08
FCC ID Device Details
| FCC ID | XU9-FW2770P |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XU9 |
| Product Code | FW2770P |
| Applicant Business | Fusion Wireless 🇺🇸 |
| Related Domains |  fusionwirelesscorp.com |
| Equipment Class | CDMA REV A MINIPCIE DATA MODULE |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2011-09-08 |
| 824.7-848.31 MHz | Change in identification of presently authorized equipment. Original FCC ID: X2U-SHAMU-PCIE Grant Date: 12/29/2009 | 2010-02-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal photos | Internal Photos | 2011-09-08 | PDF 1.9 MB |
| External Photos | External Photos | 2010-02-08 | PDF 265.4 KB |
| Internal Photos | Internal Photos | 2010-02-08 | PDF 265.4 KB |
| external photos | External Photos | 2011-09-08 | PDF 146.5 KB |
| Label 1 | ID Label/Location Info | 2010-02-08 | PDF 131.2 KB |
| Label 2 | ID Label/Location Info | 2010-02-08 | PDF 170.3 KB |
| set up photos | Test Setup Photos | 2011-09-08 | PDF 168.8 KB |
| Test report | Test Report | 2011-09-08 | PDF 85.8 KB |
| POA 1 | Cover Letter(s) | 2011-09-08 | PDF 452.9 KB |
| POA 2 | Cover Letter(s) | 2011-09-08 | PDF 23.9 KB |
| cover letter | Cover Letter(s) | 2011-09-08 | PDF 24.2 KB |
| Authorization Letter | Cover Letter(s) | 2010-02-08 | PDF 15.8 KB |
| Cover Letter | Cover Letter(s) | 2010-02-08 | PDF 83.3 KB |
| FCC Letter | Cover Letter(s) | 2010-02-08 | PDF 23.7 KB |
| SAR | RF Exposure Info | 2011-09-08 | PDF 2 MB |
Application Information
| Application ID | hkQUouVIlQJheKGC0yUBEg== |
|---|---|
| Final Action Date | 2011-09-08 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019174028 |
| Model | -FW2770P |
| Frequency Range | 824.7-848.31 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | CDMA REV A MINIPCIE DATA MODULE |
| Responsible Party | David W Carey, President & CEO, dcarey@fusionwirelesscorp.com , 858-847-9611 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Licensed Limited Modular Transmitter. Listed Output Power is conducted. The antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This PC2 is to allow use of this device in the Ricoh eQuill Clipboard Model: eQ101. The highest reported SAR value in this configuration is Body-worn: 1.451W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| hkQUouVIlQJheKGC0yUBEg== | 2011-09-08 | Class II permissive change or modification of presently authorized equipment |
| V6Yt8WPXPyaWzkQ27Mi7uA== | 2010-02-08 | Change in identification of presently authorized equipment. Original FCC ID: X2U-SHAMU-PCIE Grant Date: 12/29/2009 |
Equipment Authorization
Grants
TCB Grant - Application V6Yt8WPXPyaWzkQ27Mi7uA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 02/08/2010 Application Dated: 02/05/2010 |
| Fusion Wireless |
| 12626 High Bluff Drive |
| Suite 200 |
| San Diego, CA 92130 |
| Attention: David Carey , President & CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XU9-FW2770P |
| Name of Grantee: | Fusion Wireless |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | CDMA REV A MINIPCIE DATA MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.293 | 2.5 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.2535 | 2.5 PM | 1M28F9W |
| Licensed Limited Modular Transmitter. Listed Output Power is conducted. The antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
|
EAS Grant - Application V6Yt8WPXPyaWzkQ27Mi7uA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fusion Wireless 12626 High Bluff Drive Suite 200 San Diego, CA 92130 United States |
Date of Grant: 02/08/2010 Application Dated: 02/05/2010 |
| Attention: David Carey , President & CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XU9-FW2770P |
| Name of Grantee: | Fusion Wireless |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | CDMA REV A MINIPCIE DATA MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.293 | 2.5 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.2535 | 2.5 PM | 1M28F9W |
| Licensed Limited Modular Transmitter. Listed Output Power is conducted. The antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
|
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/08/2011 Application Dated: 09/07/2011 |
| Fusion Wireless |
| 12626 High Bluff Drive |
| Suite 200 |
| San Diego, CA 92130 |
| Attention: David Carey , President & CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XU9-FW2770P |
| Name of Grantee: | Fusion Wireless |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | CDMA REV A MINIPCIE DATA MODULE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.293 | 2.5 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.2535 | 2.5 PM | 1M28F9W |
| Licensed Limited Modular Transmitter. Listed Output Power is conducted. The antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This PC2 is to allow use of this device in the Ricoh eQuill Clipboard Model: eQ101. The highest reported SAR value in this configuration is Body-worn: 1.451W/kg. |
EAS Grant - Application hkQUouVIlQJheKGC0yUBEg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fusion Wireless 12626 High Bluff Drive Suite 200 San Diego, CA 92130 United States |
Date of Grant: 09/08/2011 Application Dated: 09/07/2011 |
| Attention: David Carey , President & CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XU9-FW2770P |
| Name of Grantee: | Fusion Wireless |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | CDMA REV A MINIPCIE DATA MODULE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.293 | 2.5 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.2535 | 2.5 PM | 1M28F9W |
| Licensed Limited Modular Transmitter. Listed Output Power is conducted. The antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This PC2 is to allow use of this device in the Ricoh eQuill Clipboard Model: eQ101. The highest reported SAR value in this configuration is Body-worn: 1.451W/kg. |
| Mail To: |