FCC ID XVG500102BC22

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566

Date of Grant: 10/14/2019 Application Dated: 09/27/2019

Amino Communications Ltd

1010 Cambourne Business Park

CambourneP.O. Box CB23 6DP,

Cambridge, United Kingdom

Attention: Teddy Lam

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XVG500102BC22
Name of Grantee:	Amino Communications Ltd
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	BCM dual band 2x2 WiFi
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.0564
38 CC MO	15E	5260.0  -  5320.0	0.0621
38 CC MO	15E	5500.0  -  5700.0	0.0538
38 CC MO	15E	5745.0  -  5825.0	0.0553

Power output listed is conducted. Limited Single Module Approval for installing into the mobile category specific host STB, Amino model number - Kamai 7XC. Device is operating in 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device contains a 2.4GHz WLAN transmitter. This device has 20MHz, 40MHz and 80MHz bandwidth modes.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Amino Communications Ltd 1010 Cambourne Business Park CambourneP.O. Box CB23 6DP, Cambridge, United Kingdom

Date of Grant: 10/14/2019 Application Dated: 09/27/2019

Attention: Teddy Lam

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XVG500102BC22
Name of Grantee:	Amino Communications Ltd
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	BCM dual band 2x2 WiFi
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.0564
38 CC MO	15E	5260.0  -  5320.0	0.0621
38 CC MO	15E	5500.0  -  5700.0	0.0538
38 CC MO	15E	5745.0  -  5825.0	0.0553

Power output listed is conducted. Limited Single Module Approval for installing into the mobile category specific host STB, Amino model number - Kamai 7XC. Device is operating in 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device contains a 2.4GHz WLAN transmitter. This device has 20MHz, 40MHz and 80MHz bandwidth modes.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application l1Iv8xE7imIaTq2Avf3+8w==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566

Date of Grant: 10/14/2019 Application Dated: 09/26/2019

Amino Communications Ltd

1010 Cambourne Business Park

CambourneP.O. Box CB23 6DP,

Cambridge, United Kingdom

Attention: Teddy Lam

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XVG500102BC22
Name of Grantee:	Amino Communications Ltd
Equipment Class:	Digital Transmission System
Notes:	BCM dual band 2x2 WiFi
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.0968
CC MO	15C	2422.0  -  2452.0	0.0337

Power output listed is conducted. Limited Single Module Approval for installing into the mobile category specific host STB, Amino model number - Kamai 7XC. Device is operating in 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device contains a 5GHz WLAN transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Amino Communications Ltd 1010 Cambourne Business Park CambourneP.O. Box CB23 6DP, Cambridge, United Kingdom

Date of Grant: 10/14/2019 Application Dated: 09/26/2019

Attention: Teddy Lam

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	XVG500102BC22
Name of Grantee:	Amino Communications Ltd
Equipment Class:	Digital Transmission System
Notes:	BCM dual band 2x2 WiFi
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.0968
CC MO	15C	2422.0  -  2452.0	0.0337

Power output listed is conducted. Limited Single Module Approval for installing into the mobile category specific host STB, Amino model number - Kamai 7XC. Device is operating in 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device contains a 5GHz WLAN transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: