FCC ID XX6-SRG3500XB

TETRA Mobile/Gateway Terminal

by Sepura plc

Grantee Code: XX6   Product Code: SRG3500XB
Latest application date: 2012-07-31

FCC ID Device Details

FCC IDXX6-SRG3500XB
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXX6
Product CodeSRG3500XB
Applicant BusinessSepura plc 🇬🇧
Related Domains sepura.com
Equipment ClassTETRA Mobile/Gateway Terminal
Test FirmDB Technology

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
817-824 MHzOriginal Equipment2012-07-31

Exhibits

DocumentTypeAvailableFile
Installation guideUsers Manual2012-07-31PDF 790.4 KB
Mobile gateway accessoriesUsers Manual2012-07-31PDF 859.3 KB
Product guideUsers Manual2012-07-31PDF 1.9 MB
Quick reference guideUsers Manual2012-07-31PDF 169.4 KB
SRG3500 Gateway repeater specificationUsers Manual2012-07-31PDF 715.5 KB
Internal photosInternal Photos2012-07-31PDF 149 KB
External photos1External Photos2012-07-31PDF 177.9 KB
External photos2External Photos2012-07-31PDF 516.9 KB
External photos3External Photos2012-07-31PDF 360.7 KB
LabelID Label/Location Info2012-07-31PDF 2.3 MB
Label and locationID Label/Location Info2012-07-31PDF 2.3 MB
Label and location 2ID Label/Location Info2012-07-31PDF 111 KB
Label locationID Label/Location Info2012-07-31PDF 111 KB
Test setup photosTest Setup Photos2012-07-31PDF 604.4 KB
Part 90 reportTest Report2012-07-31PDF 1.7 MB
Test reportTest Report2012-07-31PDF 1.7 MB
Confidentiality letterCover Letter(s)2012-07-31PDF 87.2 KB
FCC rule changeCover Letter(s)2012-07-31PDF 204.4 KB
RF exposure reportRF Exposure Info2012-07-31PDF 39.4 KB

Application Information

Application IDwybWW5XQCpfkzsWrCkS8Ow==
Final Action Date2012-07-31
Application PurposeOriginal Equipment
Applicant FRN0019352178
Model-SRG3500XB
Equipment ClassJBP - Part 15 Class B Computing Device Peripheral
Device DescriptionTETRA Mobile/Gateway Terminal
Responsible PartySteve Wood, Verification Engineering Team Leader, steve.wood@sepura.com , 01223877354
Test FirmDave Smith, DB Technology, mail@dbtechnology.co.uk , 44-1954-251974
TCB EmailTom.Twynam@babt.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
wybWW5XQCpfkzsWrCkS8Ow==2012-07-31Original Equipment
DpdyRBkOX/Wr26ObsGsPWw==2012-07-31Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
817-824 MHz12.59100Hz22K0DXW9
862-869 MHz12.591000Hz22K0DXW9

Grants

TCB Grant - Application wybWW5XQCpfkzsWrCkS8Ow==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 07/31/2012

Application Dated: 07/31/2012
Sepura plc
Radio House
St Andrews Road
Cambridge, CB4 1GR
United Kingdom
 
Attention: Steve Wood , Verification Engineering Team Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XX6-SRG3500XB
Name of Grantee:  Sepura plc
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: TETRA Mobile/Gateway Terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 


EAS Grant - Application wybWW5XQCpfkzsWrCkS8Ow==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sepura plc
Radio House St Andrews Road
Cambridge, CB4 1GR
United Kingdom
  Date of Grant: 07/31/2012

Application Dated: 07/31/2012
 
Attention: Steve Wood , Verification Engineering Team Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XX6-SRG3500XB
Name of Grantee:  Sepura plc
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: TETRA Mobile/Gateway Terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 



TCB Grant - Application DpdyRBkOX/Wr26ObsGsPWw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 07/31/2012

Application Dated: 07/31/2012
Sepura plc
Radio House
St Andrews Road
Cambridge, CB4 1GR
United Kingdom
 
Attention: Steve Wood , Verification Engineering Team Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XX6-SRG3500XB
Name of Grantee:  Sepura plc
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: TETRA Mobile/Gateway Terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 817.0  -  824.0 12.59 100.0  Hz 22K0DXW
90 862.0  -  869.0 12.59 1000.0  Hz 22K0DXW

Output power is peak conducted. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 25cm (2dBi) and 31 cm (7dBi) is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm (2dBi) and 31 cm (7dBi) from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This device must be used with a maximum transmitting duty factor not exceeding 25% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting occupational /Controlled Exposure Environment requirements.

This Certification is approved pursuant to the Tetra waiver FCC 11-63.


EAS Grant - Application DpdyRBkOX/Wr26ObsGsPWw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sepura plc
Radio House St Andrews Road
Cambridge, CB4 1GR
United Kingdom
  Date of Grant: 07/31/2012

Application Dated: 07/31/2012
 
Attention: Steve Wood , Verification Engineering Team Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XX6-SRG3500XB
Name of Grantee:  Sepura plc
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: TETRA Mobile/Gateway Terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 817.0  -  824.0 12.59 100.0  Hz 22K0DXW
90 862.0  -  869.0 12.59 1000.0  Hz 22K0DXW

Output power is peak conducted. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 25cm (2dBi) and 31 cm (7dBi) is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm (2dBi) and 31 cm (7dBi) from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This device must be used with a maximum transmitting duty factor not exceeding 25% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting occupational /Controlled Exposure Environment requirements.

This Certification is approved pursuant to the Tetra waiver FCC 11-63.



Mail To: