FCC ID XX6SEM8010

DMR Mobile Radio

by Sepura Limited

Grantee Code: XX6   Product Code: SEM8010
Latest application date: 2015-11-18

FCC ID Device Details

FCC IDXX6SEM8010
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXX6
Product CodeSEM8010
Applicant BusinessSepura Limited 🇬🇧
Related Domains sepura.com
Equipment ClassDMR Mobile Radio
Test FirmBay Area Compliance Laboratories Corp. (Dongguan)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
136-174 MHzClass II permissive change or modification of presently authorized equipment2015-11-18
136-174 MHzOriginal Equipment2014-12-22

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2014-12-22PDF 478.3 KB
Int PhotosInternal Photos2014-12-22PDF 449.9 KB
Ext PhotosExternal Photos2014-12-22PDF 809 KB
FCC ID LabelID Label/Location Info2014-12-22PDF 105.7 KB
Setup PhotosTest Setup Photos2014-12-22PDF 96 KB
Test ReportTest Report2015-11-18PDF 375.9 KB
Test ReportTest Report2014-12-22PDF 1.4 MB
Attestation Letter 1Attestation Statements2015-11-18PDF 319.9 KB
Attestation Letter 2Attestation Statements2015-11-18PDF 314.5 KB
CIIPC LetterCover Letter(s)2015-11-18PDF 308.5 KB
Manufacturer Declaration LetterCover Letter(s)2015-11-18PDF 320.9 KB
POACover Letter(s)2015-11-18PDF 243.4 KB
Confidentiality LetterCover Letter(s)2014-12-22PDF 110.9 KB
Justification LetterCover Letter(s)2014-12-22PDF 123.7 KB
POACover Letter(s)2014-12-22PDF 108.9 KB
RF ExposureRF Exposure Info2015-11-18PDF 72.9 KB
RF ExposureRF Exposure Info2014-12-22PDF 119.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 41.8 KB
Schematics Metadata onlySchematicsPDF 543.4 KB
Operation Description Metadata onlyOperational DescriptionPDF 20.9 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 90.4 KB
Tune up Procedure Metadata onlyParts List/Tune Up InfoPDF 78.9 KB

Application Information

Application IDtggmvcTMYgGLuK6wih8/fw==
Final Action Date2015-11-18
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019352178
ModelSEM8010
Frequency Range136-174 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionDMR Mobile Radio
Responsible PartyChris Beecham, Conformance Engineer, chris.beecham@sepura.com , 01223876000
Test FirmJohn Chan, Bay Area Compliance Laboratories Corp. (Dongguan), john.chan@baclcorp.com , 86-769-86858888
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change documented in this filing. Output power is rated conducted. RF exposure compliance was evaluated using 0 dBi vehicle-mount antenna only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 35 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting occupational/Controlled Exposure Environment requirements.

Applications

Application IDDatePurpose
tggmvcTMYgGLuK6wih8/fw==2015-11-18Class II permissive change or modification of presently authorized equipment
U5/hYs+RyL+hw59y1GOogw==2014-12-22Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
136-174 MHz250.12ppm11K0F3E22, 9EF
136-174 MHz250.12ppm10K4F3E22, 9BF, EF
136-174 MHz250.12ppm7K60FXD22, 9EF, ES
136-174 MHz250.12ppm9K22FXD22, 9BF, EF
136-174 MHz250.12ppm7K60FXW22, 9EF, ES
136-174 MHz250.12ppm9K22FXW22, 9BF, EF
136-174 MHz10.12ppm11K0F3E22, 9EF
136-174 MHz10.12ppm7K60FXD22, 9EF, ES
136-174 MHz10.12ppm7K60FXW22, 9EF, ES

Grants

TCB Grant - Application U5/hYs+RyL+hw59y1GOogw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 12/22/2014

Application Dated: 12/22/2014
Sepura Limited
9000 Cambridge Research Park
Beach Drive, Waterbeach
Cambridge, CB25 9TL
United Kingdom
 
Attention: Chris Beecham , Conformance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XX6SEM8010
Name of Grantee:  Sepura Limited
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: DMR Mobile Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BF EF 22, 90 136.0  -  174.0 25.0 0.12  PM 10K4F3E
BF EF 22, 90 136.0  -  174.0 25.0 0.12  PM 9K22FXD
BF EF 22, 90 136.0  -  174.0 25.0 0.12  PM 9K22FXW

Output power is rated conducted. RF exposure compliance was evaluated using 0 dBi vehicle-mount antenna only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 75cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting occupational/Controlled Exposure Environment requirements.

BF: The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application U5/hYs+RyL+hw59y1GOogw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sepura Limited
9000 Cambridge Research Park Beach Drive, Waterbeach
Cambridge, CB25 9TL
United Kingdom
  Date of Grant: 12/22/2014

Application Dated: 12/22/2014
 
Attention: Chris Beecham , Conformance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XX6SEM8010
Name of Grantee:  Sepura Limited
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: DMR Mobile Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BF EF 22, 90 136.0  -  174.0 25.0 0.12  PM 10K4F3E
BF EF 22, 90 136.0  -  174.0 25.0 0.12  PM 9K22FXD
BF EF 22, 90 136.0  -  174.0 25.0 0.12  PM 9K22FXW

Output power is rated conducted. RF exposure compliance was evaluated using 0 dBi vehicle-mount antenna only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 75cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting occupational/Controlled Exposure Environment requirements.


BF: The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application tggmvcTMYgGLuK6wih8/fw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 11/18/2015

Application Dated: 11/18/2015
Sepura Limited
9000 Cambridge Research Park
Beach Drive, Waterbeach
Cambridge, CB25 9TL
United Kingdom
 
Attention: Chris Beecham , Conformance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XX6SEM8010
Name of Grantee:  Sepura Limited
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: DMR Mobile Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 22, 90 136.0  -  174.0 25.0 0.12  PM 11K0F3E
EF ES 22, 90 136.0  -  174.0 25.0 0.12  PM 7K60FXD
EF ES 22, 90 136.0  -  174.0 25.0 0.12  PM 7K60FXW
EF 22, 90 136.0  -  174.0 1.0 0.12  PM 11K0F3E
EF ES 22, 90 136.0  -  174.0 1.0 0.12  PM 7K60FXD
EF ES 22, 90 136.0  -  174.0 1.0 0.12  PM 7K60FXW

Class II Permissive Change documented in this filing. Output power is rated conducted. RF exposure compliance was evaluated using 0 dBi vehicle-mount antenna only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 35 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting occupational/Controlled Exposure Environment requirements.

EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

EAS Grant - Application tggmvcTMYgGLuK6wih8/fw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sepura Limited
9000 Cambridge Research Park Beach Drive, Waterbeach
Cambridge, CB25 9TL
United Kingdom
  Date of Grant: 11/18/2015

Application Dated: 11/18/2015
 
Attention: Chris Beecham , Conformance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XX6SEM8010
Name of Grantee:  Sepura Limited
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: DMR Mobile Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 22, 90 136.0  -  174.0 25.0 0.12  PM 11K0F3E
EF ES 22, 90 136.0  -  174.0 25.0 0.12  PM 7K60FXD
EF ES 22, 90 136.0  -  174.0 25.0 0.12  PM 7K60FXW
EF 22, 90 136.0  -  174.0 1.0 0.12  PM 11K0F3E
EF ES 22, 90 136.0  -  174.0 1.0 0.12  PM 7K60FXD
EF ES 22, 90 136.0  -  174.0 1.0 0.12  PM 7K60FXW

Class II Permissive Change documented in this filing. Output power is rated conducted. RF exposure compliance was evaluated using 0 dBi vehicle-mount antenna only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 35 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting occupational/Controlled Exposure Environment requirements.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

Mail To: