FCC ID XXAMOXITRX

Transponder

by J-MEX, Inc.

Grantee Code: XXA   Product Code: MOXITRX
Latest application date: 2025-07-17

FCC ID Device Details

FCC IDXXAMOXITRX
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXXA
Product CodeMOXITRX
Applicant BusinessJ-MEX, Inc. 🇹🇼
Related Domains jmex.com.tw isl.com.tw
Equipment ClassTransponder
Test FirmInternational Standards Laboratory Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2025-07-17
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-07-17
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: X8WWT02C40C Grant Date: 12/12/20242025-02-21
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: X8WWT02C40C Grant Date: 12/12/20242025-02-21

Exhibits

DocumentTypeAvailableFile
Users ManualUsers ManualPDF 665.6 KB
External PhotosExternal Photos2025-02-21PDF 780.5 KB
ID Label/Location InfoID Label/Location Info2025-02-21PDF 103.6 KB
Test Setup Photos_SARTest Setup Photos2025-07-17PDF 150.5 KB
Test Report_SARRF Exposure Info2025-07-17PDF 1.3 MB
Test Report_SAR_Appendix ARF Exposure Info2025-07-17PDF 417.4 KB
Test Report_SAR_Appendix BRF Exposure Info2025-07-17PDF 490.2 KB
Test Report_SAR_Appendix CRF Exposure Info2025-07-17PDF 5.7 MB
Covered_List_Attestation_FCC_Application LetterAttestation Statements2025-07-17PDF 187.4 KB
US AgentAttestation Statements2025-07-17PDF 628.3 KB
Attestation_FCC_Application LetterAttestation Statements2025-02-21PDF 55.3 KB
US Agent LetterAttestation Statements2025-02-21PDF 193.6 KB
Class II permissive change letterCover Letter(s)2025-07-17PDF 136.7 KB
Class II permissive change letter for FCCCover Letter(s)2025-07-17PDF 136.7 KB
Declaration of authorizationCover Letter(s)2025-07-17PDF 137.5 KB
Authority to Act as Agent-FCCCover Letter(s)2025-02-21PDF 23.6 KB
Authorization letterCover Letter(s)2025-02-21PDF 118.7 KB
Change ID Letter - new granteeCover Letter(s)2025-02-21PDF 31.2 KB
Declaration of authorizationCover Letter(s)2025-02-21PDF 41.6 KB

Application Information

Application IDzLz1AuLbxsuz1KYjNL45qg==
Final Action Date2025-07-17
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019302280
ModelMOXITRX
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionTransponder
Responsible PartyFred Huang, PE Manager, fred@jmex.com.tw , 886-3-6661036
Technical ContactJerry Liu, International Standards Laboratory Corp., Jerry_CF_Liu@isl.com.tw , 886-3-263-8888
Non-Technical ContactBarry Lee, International Standards Laboratory Corp., Barry_Lee@isl.com.tw , 886-3-263-8888
Test FirmBenson Chen, International Standards Laboratory Corp., Benson_Chen@isl.com.tw , 886-3-263-8888
TCB Emaildl_radio-certification@kiwa.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change : RF exposure is evaluated for a portable device. The highest reported SAR for body exposure condition is 1.14 W/kg. Modular Approval. Power Output is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz bandwidth modes.

Applications

Application IDDatePurpose
zLz1AuLbxsuz1KYjNL45qg==2025-07-17Class II permissive change or modification of presently authorized equipment
R6szifD6kIwv82M2EwXsRQ==2025-07-17Class II permissive change or modification of presently authorized equipment
jFpSWNQM7nipZVJ90oeNpw==2025-02-21Change in identification of presently authorized equipment. Original FCC ID: X8WWT02C40C Grant Date: 12/12/2024
eDJoGfx0EOeIvL6TweK2XQ==2025-02-21Change in identification of presently authorized equipment. Original FCC ID: X8WWT02C40C Grant Date: 12/12/2024

Equipment Authorization

FrequencyOutputGrant Notes
2402-2480 MHz0.002CC
2405-2480 MHz0.002CC
2412-2462 MHz0.16CC
5180-5240 MHz0.013CC
5260-5320 MHz0.011CC, ND
5500-5720 MHz0.012CC, ND
5745-5825 MHz0.012CC

Grants

TCB Grant - Application zLz1AuLbxsuz1KYjNL45qg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Kiwa Nederland B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/17/2025

Application Dated: 07/17/2025
J-MEX, Inc.
B2, 3F, No. 1, Li-Hsin 1st Road, SBIP
Hsin Chu, 300094
Taiwan
 
Attention: Fred Huang , PE Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XXAMOXITRX
Name of Grantee:  J-MEX, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Transponder
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.013  
CC ND 15E 5260.0  -  5320.0 0.011  
CC ND 15E 5500.0  -  5720.0 0.012  
CC 15E 5745.0  -  5825.0 0.012  

Class II Permissive Change : RF exposure is evaluated for a portable device. The highest reported SAR for body exposure condition is 1.14 W/kg.

Modular Approval. Power Output is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application R6szifD6kIwv82M2EwXsRQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Kiwa Nederland B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/17/2025

Application Dated: 07/17/2025
J-MEX, Inc.
B2, 3F, No. 1, Li-Hsin 1st Road, SBIP
Hsin Chu, 300094
Taiwan
 
Attention: Fred Huang , PE Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XXAMOXITRX
Name of Grantee:  J-MEX, Inc.
Equipment Class: Digital Transmission System
Notes: Transponder
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC 15C 2412.0  -  2462.0 0.16  

Class II Permissive Change : RF exposure is evaluated for a portable device. The highest reported SAR for body exposure condition is 0.95 W/kg.

Modular Approval. Power Output is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device supports 20 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application jFpSWNQM7nipZVJ90oeNpw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Kiwa Nederland B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 02/21/2025

Application Dated: 02/21/2025
J-MEX, Inc.
B2, 3F, No. 1, Li-Hsin 1st Road, SBIP
Hsin Chu, 300094
Taiwan
 
Attention: Fred Huang , PE Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XXAMOXITRX
Name of Grantee:  J-MEX, Inc.
Equipment Class: Digital Transmission System
Notes: Transponder
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC 15C 2405.0  -  2480.0 0.002  
CC 15C 2412.0  -  2462.0 0.16  

Modular Approval. Power Output is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application eDJoGfx0EOeIvL6TweK2XQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Kiwa Nederland B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 02/21/2025

Application Dated: 02/21/2025
J-MEX, Inc.
B2, 3F, No. 1, Li-Hsin 1st Road, SBIP
Hsin Chu, 300094
Taiwan
 
Attention: Fred Huang , PE Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XXAMOXITRX
Name of Grantee:  J-MEX, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Transponder
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.013  
CC ND 15E 5260.0  -  5320.0 0.011  
CC ND 15E 5500.0  -  5720.0 0.012  
CC 15E 5745.0  -  5825.0 0.012  

Modular Approval. Power Output is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).