FCC ID XYD-2NPD
Telecell with location and dimming control
by Telensa Ltd.
Grantee Code: XYD Product Code: 2NPD
Latest application date: 2017-11-22
Device Images
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 910.5-919.975 MHz | Class II permissive change or modification of presently authorized equipment | 2017-11-22 |
| 910.5-919.975 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-23 |
| 910.5-919.975 MHz | Change in identification of presently authorized equipment. Original FCC ID: XYD-2NXD Grant Date: 01/15/2016 | 2016-03-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual and Instructions | Users Manual | 2017-11-22 | PDF 458.9 KB |
| User Manual | Users Manual | 2016-05-23 | PDF 365.8 KB |
| Internal Photos | Internal Photos | 2017-11-22 | PDF 428.6 KB |
| Internal Photos | Internal Photos | 2016-05-23 | PDF 716.4 KB |
| External Photos | External Photos | 2016-05-23 | PDF 407.6 KB |
| External Photos | External Photos | 2016-03-09 | PDF 191.9 KB |
| Label Info and Location | ID Label/Location Info | 2016-03-09 | PDF 159.1 KB |
| Test Set Up Photos | Test Setup Photos | 2017-11-22 | PDF 2.5 MB |
| Test Setup Photos | Test Setup Photos | 2016-05-23 | PDF 399.4 KB |
| Part 15.247 test report | Test Report | 2017-11-22 | PDF 441.7 KB |
| Part 15.247 Test Report | Test Report | 2016-05-23 | PDF 451.3 KB |
| Professional Installation Attestation | Attestation Statements | 2017-11-22 | PDF 229.3 KB |
| Antenna installation attestation letter | Attestation Statements | 2016-05-23 | PDF 220.4 KB |
| Authorisation Letter | Cover Letter(s) | 2017-11-22 | PDF 359.2 KB |
| C2PC Request Letter | Cover Letter(s) | 2017-11-22 | PDF 121.7 KB |
| Request for Confidentiality Letter | Cover Letter(s) | 2017-11-22 | PDF 136.3 KB |
| Authorization Letter | Cover Letter(s) | 2016-05-23 | PDF 291.2 KB |
| C2PC Request Letter | Cover Letter(s) | 2016-05-23 | PDF 223 KB |
| Confidentiality Request | Cover Letter(s) | 2016-05-23 | PDF 311.7 KB |
| Test method explanation | Cover Letter(s) | 2016-05-23 | PDF 222.3 KB |
| Authorization Letter | Cover Letter(s) | 2016-03-09 | PDF 291.1 KB |
| Change of ID Cover Letter | Cover Letter(s) | 2016-03-09 | PDF 222.4 KB |
| MPE Calculation | RF Exposure Info | 2017-11-22 | PDF 340.9 KB |
| RF Exposure Analysis | RF Exposure Info | 2016-05-23 | PDF 27.2 KB |
| Antenna isolator schematic Metadata only | Schematics | PDF 39.5 KB | |
| Schematics Metadata only | Schematics | PDF 849.8 KB | |
| Change Description Metadata only | Operational Description | PDF 75.4 KB | |
| Change Documentation Metadata only | Operational Description | PDF 2 MB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 59.6 KB | |
| Parts List 1 Metadata only | Parts List/Tune Up Info | PDF 584.1 KB | |
| Parts List 2 Metadata only | Parts List/Tune Up Info | PDF 152 KB | |
| Parts List 3 Metadata only | Parts List/Tune Up Info | PDF 305.5 KB | |
| Tune Up Information Metadata only | Parts List/Tune Up Info | PDF 124.9 KB |
Application Information
| Application ID | QbB1TPc7l6WQEjGd4XCtJA== |
|---|---|
| Final Action Date | 2017-11-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019325810 |
| Model | 2NPD |
| Frequency Range | 910.5-919.975 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Telecell with location and dimming control |
| Responsible Party | Will Gibson, Mr., wg@telensa.com  , +44 1799 533289 |
| Technical Contact | Mark Bailey, Telensa Limited, mbailey@telensa.com , +441799588710 |
| Non-Technical Contact | Mark Bailey, Telensa Limited, mbailey@telensa.com , +441799588710 |
| Test Firm | Darren Rust, UL VS Ltd, darren.rust@ul.com  , +44 1256 31 2119 |
| TCB Email | certification@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Class II Permissive Change to allow for the use of an external antenna with the equipment as detailed in this filing. Class II Permissive Change to allow for changes as detailed in this filing. This device must be professionally installed. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| QbB1TPc7l6WQEjGd4XCtJA== | 2017-11-22 | Class II permissive change or modification of presently authorized equipment |
| mNiQZjkbxsxivnvCgEoMqw== | 2016-05-23 | Class II permissive change or modification of presently authorized equipment |
| JIwh7JRzDLNju1o1nPExjQ== | 2016-03-09 | Change in identification of presently authorized equipment. Original FCC ID: XYD-2NXD Grant Date: 01/15/2016 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 910.5-919.975 MHz | 0.0870000 | 15C |
Grants
TCB Grant - Application QbB1TPc7l6WQEjGd4XCtJA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 11/22/2017 Application Dated: 11/22/2017 |
| Telensa Ltd. |
| Iconix 3, London Road |
| Pampisford |
| Cambridge, CB22 3EG United Kingdom |
| Attention: Will Gibson , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XYD-2NPD |
| Name of Grantee: | Telensa Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Telecell with location and dimming control |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 910.5 - 919.975 | 0.087 |
| Output power is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Class II Permissive Change to allow for the use of an external antenna with the equipment as detailed in this filing. Class II Permissive Change to allow for changes as detailed in this filing. This device must be professionally installed. |
EAS Grant - Application QbB1TPc7l6WQEjGd4XCtJA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telensa Ltd. Iconix 3, London Road Pampisford Cambridge, CB22 3EG United Kingdom |
Date of Grant: 11/22/2017 Application Dated: 11/22/2017 |
| Attention: Will Gibson , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XYD-2NPD |
| Name of Grantee: | Telensa Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Telecell with location and dimming control |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 910.5 - 919.975 | 0.087 |
| Output power is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Class II Permissive Change to allow for the use of an external antenna with the equipment as detailed in this filing. Class II Permissive Change to allow for changes as detailed in this filing. This device must be professionally installed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 05/23/2016 Application Dated: 05/23/2016 |
| Telensa Ltd. |
| Iconix 3, London Road |
| Pampisford |
| Cambridge, CB22 3EG United Kingdom |
| Attention: Will Gibson , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XYD-2NPD |
| Name of Grantee: | Telensa Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Telecell with location and dimming control |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 910.5 - 919.975 | 0.087 |
| Output power is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Class II Permissive Change to allow for the use of an external antenna with the equipment as detailed in this filing. |
EAS Grant - Application mNiQZjkbxsxivnvCgEoMqw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telensa Ltd. Iconix 3, London Road Pampisford Cambridge, CB22 3EG United Kingdom |
Date of Grant: 05/23/2016 Application Dated: 05/23/2016 |
| Attention: Will Gibson , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XYD-2NPD |
| Name of Grantee: | Telensa Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Telecell with location and dimming control |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 910.5 - 919.975 | 0.087 |
| Output power is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Class II Permissive Change to allow for the use of an external antenna with the equipment as detailed in this filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 03/09/2016 Application Dated: 03/09/2016 |
| Telensa Ltd. |
| Iconix 3, London Road |
| Pampisford |
| Cambridge, CB22 3EG United Kingdom |
| Attention: Will Gibson , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XYD-2NPD |
| Name of Grantee: | Telensa Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Telecell with location and dimming control |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 910.5 - 919.975 | 0.087 |
| Output power is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Class II Permissive Change to allow for changes to radio section as detailed in this filing. |
EAS Grant - Application JIwh7JRzDLNju1o1nPExjQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telensa Ltd. Iconix 3, London Road Pampisford Cambridge, CB22 3EG United Kingdom |
Date of Grant: 03/09/2016 Application Dated: 03/09/2016 |
| Attention: Will Gibson , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XYD-2NPD |
| Name of Grantee: | Telensa Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Telecell with location and dimming control |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 910.5 - 919.975 | 0.087 |
| Output power is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Class II Permissive Change to allow for changes to radio section as detailed in this filing. |
| Mail To: |