FCC ID XZB-MAXR7202
802.11a/b/g/n WLAN mini-PCI card
by Arada Systems, Inc
Grantee Code: XZB Product Code: MAXR7202
Latest application date: 2011-07-21
FCC ID Device Details
| FCC ID | XZB-MAXR7202 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XZB |
| Product Code | MAXR7202 |
| Applicant Business | Arada Systems, Inc 🇺🇸 |
| Related Domains |  aradasystems.com |
| Equipment Class | 802.11a/b/g/n WLAN mini-PCI card |
| Test Firm | Sporton International Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2011-07-21 |
| 2412-2462 MHz | Original Equipment | 2011-07-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2011-07-21 | PDF 30.8 KB |
| Internal Photos | Internal Photos | 2011-07-21 | PDF 423.4 KB |
| External PHotos | External Photos | 2011-07-21 | PDF 376.6 KB |
| External Photos | External Photos | 2011-07-21 | PDF 376.6 KB |
| Label Location | ID Label/Location Info | 2011-07-21 | PDF 52.8 KB |
| Test Setup Photos | Test Setup Photos | 2011-07-21 | PDF 413.7 KB |
| Test Report | Test Report | 2011-07-21 | PDF 1.4 MB |
| test Report | Test Report | 2011-07-21 | PDF 1 MB |
| DOC letter | Cover Letter(s) | 2011-07-21 | PDF 202.4 KB |
| LMA letter | Cover Letter(s) | 2011-07-21 | PDF 28.9 KB |
| LTC Request | Cover Letter(s) | 2011-07-21 | PDF 267.4 KB |
| PoA | Cover Letter(s) | 2011-07-21 | PDF 227.1 KB |
| MPE | RF Exposure Info | 2011-07-21 | PDF 102.9 KB |
Application Information
| Application ID | z/9P5z3sBe2pbO4aAOI0mw== |
|---|---|
| Final Action Date | 2011-07-21 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0019372309 |
| Model | -MAXR7202 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11a/b/g/n WLAN mini-PCI card |
| Responsible Party | Praveen Singh, psingh@aradasystems.com , 4087739298 |
| Agent | Leo Leo Leo, Sporton International Inc., leohuang@sporton.com.tw  , 886-3-656-9065 |
| Test Firm | Alex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456 |
| TCB Email | Brandhorst.dirk@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is the maximum combined conducted peak output power as indicated in the filing. The antennas are self co-located (DTS transceiver certified under the same FCC ID). The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device approved for use in products which operate as a mobile transmitting device with respect to Rule Part 2.1091. This modular device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any additional antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. Compliance of this module in its final configuration is the responsibility of Grantee. Separate approval is required for portable configurations with respect to Rule Part 2.1093. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| z/9P5z3sBe2pbO4aAOI0mw== | 2011-07-21 | Original Equipment |
| gslDI5fbVj70h5YPSlIxOw== | 2011-07-21 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application z/9P5z3sBe2pbO4aAOI0mw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 07/21/2011 Application Dated: 07/21/2011 |
| Arada Systems, Inc |
| 4633 Old Ironsides Drive |
| Suite 415 |
| Santa Clara, CA 95054 |
| Attention: Praveen Singh |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XZB-MAXR7202 |
| Name of Grantee: | Arada Systems, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n WLAN mini-PCI card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.047 |
| Power listed is the maximum combined conducted peak output power as indicated in the filing. The antennas are self co-located (DTS transceiver certified under the same FCC ID). The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device approved for use in products which operate as a mobile transmitting device with respect to Rule Part 2.1091. This modular device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any additional antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. Compliance of this module in its final configuration is the responsibility of Grantee. Separate approval is required for portable configurations with respect to Rule Part 2.1093. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application z/9P5z3sBe2pbO4aAOI0mw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Arada Systems, Inc 4633 Old Ironsides Drive Suite 415P.O. Box , Santa Clara, CA 95054 United States |
Date of Grant: 07/21/2011 Application Dated: 07/21/2011 |
| Attention: Praveen Singh |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XZB-MAXR7202 |
| Name of Grantee: | Arada Systems, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n WLAN mini-PCI card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.047 |
| Power listed is the maximum combined conducted peak output power as indicated in the filing. The antennas are self co-located (DTS transceiver certified under the same FCC ID). The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device approved for use in products which operate as a mobile transmitting device with respect to Rule Part 2.1091. This modular device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any additional antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. Compliance of this module in its final configuration is the responsibility of Grantee. Separate approval is required for portable configurations with respect to Rule Part 2.1093. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 07/21/2011 Application Dated: 07/21/2011 |
| Arada Systems, Inc |
| 4633 Old Ironsides Drive |
| Suite 415 |
| Santa Clara, CA 95054 |
| Attention: Praveen Singh |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XZB-MAXR7202 |
| Name of Grantee: | Arada Systems, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n WLAN mini-PCI card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.767 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.612 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.484 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.466 |
| Power listed is the maximum combined conducted peak output power as indicated in the filing. The antennas are self co-located (UNII transceiver certified under the same FCC ID). The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device approved for use in products which operate as a mobile transmitting device with respect to Rule Part 2.1091. This modular device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any additional antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. Compliance of this module in its final configuration is the responsibility of Grantee. Separate approval is required for portable configurations with respect to Rule Part 2.1093. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application gslDI5fbVj70h5YPSlIxOw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Arada Systems, Inc 4633 Old Ironsides Drive Suite 415P.O. Box , Santa Clara, CA 95054 United States |
Date of Grant: 07/21/2011 Application Dated: 07/21/2011 |
| Attention: Praveen Singh |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XZB-MAXR7202 |
| Name of Grantee: | Arada Systems, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n WLAN mini-PCI card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.767 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.612 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.484 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.466 |
| Power listed is the maximum combined conducted peak output power as indicated in the filing. The antennas are self co-located (UNII transceiver certified under the same FCC ID). The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device approved for use in products which operate as a mobile transmitting device with respect to Rule Part 2.1091. This modular device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any additional antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. Compliance of this module in its final configuration is the responsibility of Grantee. Separate approval is required for portable configurations with respect to Rule Part 2.1093. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |