FCC ID Y2K-PROTUBE001
Barcode Label Printer
by Inpeco Spa a Socio Unico
Grantee Code: Y2K Product Code: PROTUBE001
Latest application date: 2015-03-23
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2015-03-23 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2015-03-23 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBTN Grant Date: 07/29/2011 | 2014-10-28 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBTN Grant Date: 07/29/2011 | 2014-10-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| internal photos | Internal Photos | 2015-03-23 | PDF 123.4 KB |
| external photos | External Photos | 2015-03-23 | PDF 1.1 MB |
| External Photos | External Photos | 2014-10-28 | PDF 79.2 KB |
| label and location | ID Label/Location Info | 2015-03-23 | PDF 176 KB |
| Label | ID Label/Location Info | 2014-10-28 | PDF 76.4 KB |
| block diagram | Block Diagram | 2015-03-23 | PDF 256.1 KB |
| Wifi-BT antenna | Operational Description | 2015-03-23 | PDF 1 MB |
| operational description | Operational Description | 2015-03-23 | PDF 1 MB |
| test setup photos | Test Setup Photos | 2015-03-23 | PDF 80.4 KB |
| test report | Test Report | 2015-03-23 | PDF 2.3 MB |
| BT letter | Cover Letter(s) | 2015-03-23 | PDF 229.6 KB |
| C2PC letter | Cover Letter(s) | 2015-03-23 | PDF 229.7 KB |
| Authority to Act as Agent | Cover Letter(s) | 2014-10-28 | PDF 171 KB |
| Authorization from Original Grantee | Cover Letter(s) | 2014-10-28 | PDF 281.8 KB |
| Change in ID Request from New Grantee | Cover Letter(s) | 2014-10-28 | PDF 174.8 KB |
| MPE | RF Exposure Info | 2015-03-23 | PDF 36.4 KB |
| MPE | RF Exposure Info | 2015-03-23 | PDF 36.4 KB |
Application Information
| Application ID | ittwmiV01evVW7OauUYTjw== |
|---|---|
| Final Action Date | 2015-03-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020359642 |
| Model | PROTUBE001 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Barcode Label Printer |
| Responsible Party | Cristian Leotta, Certification Engineer, cristian.leotta@inpeco.com  , 390117548105 |
| Test Firm | Ralph Spanevello, Nemko SpA, ralph.spanevello@nemko.com  , 39-0392201201 |
| TCB Email | stuart.beck@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ittwmiV01evVW7OauUYTjw== | 2015-03-23 | Class II permissive change or modification of presently authorized equipment |
| Uw6hLo1aQTAuAnue+WZIRQ== | 2015-03-23 | Class II permissive change or modification of presently authorized equipment |
| OpBjOuTXifnjY9b93AJ4FQ== | 2014-10-28 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBTN Grant Date: 07/29/2011 |
| 4MqAlrzzZGkp8q+NcKpc7A== | 2014-10-28 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBTN Grant Date: 07/29/2011 |
Equipment Authorization
Grants
TCB Grant - Application Uw6hLo1aQTAuAnue+WZIRQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 03/23/2015 Application Dated: 03/18/2015 |
| Inpeco Spa a Socio Unico |
| Via Givoletto 15 |
| Val della Torre Torino, 10040 Italy |
| Attention: Cristian Leotta , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Y2K-PROTUBE001 |
| Name of Grantee: | Inpeco Spa a Socio Unico |
| Equipment Class: | Digital Transmission System |
| Notes: | Barcode Label Printer |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2642 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Uw6hLo1aQTAuAnue+WZIRQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inpeco Spa a Socio Unico Via Givoletto 15 Val della Torre Torino, 10040 Italy |
Date of Grant: 03/23/2015 Application Dated: 03/18/2015 |
| Attention: Cristian Leotta , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Y2K-PROTUBE001 |
| Name of Grantee: | Inpeco Spa a Socio Unico |
| Equipment Class: | Digital Transmission System |
| Notes: | Barcode Label Printer |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2642 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 10/28/2014 Application Dated: 10/27/2014 |
| Inpeco Spa a Socio Unico |
| Via Givoletto 15 |
| Val della Torre Torino, 10040 Italy |
| Attention: Cristian Leotta , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Y2K-PROTUBE001 |
| Name of Grantee: | Inpeco Spa a Socio Unico |
| Equipment Class: | Digital Transmission System |
| Notes: | PROTUBE WIFI-BT |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2642 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application OpBjOuTXifnjY9b93AJ4FQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inpeco Spa a Socio Unico Via Givoletto 15 Val della Torre Torino, 10040 Italy |
Date of Grant: 10/28/2014 Application Dated: 10/27/2014 |
| Attention: Cristian Leotta , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Y2K-PROTUBE001 |
| Name of Grantee: | Inpeco Spa a Socio Unico |
| Equipment Class: | Digital Transmission System |
| Notes: | PROTUBE WIFI-BT |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2642 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 03/23/2015 Application Dated: 03/18/2015 |
| Inpeco Spa a Socio Unico |
| Via Givoletto 15 |
| Val della Torre Torino, 10040 Italy |
| Attention: Cristian Leotta , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Y2K-PROTUBE001 |
| Name of Grantee: | Inpeco Spa a Socio Unico |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Barcode Label Printer |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0084 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ittwmiV01evVW7OauUYTjw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inpeco Spa a Socio Unico Via Givoletto 15 Val della Torre Torino, 10040 Italy |
Date of Grant: 03/23/2015 Application Dated: 03/18/2015 |
| Attention: Cristian Leotta , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Y2K-PROTUBE001 |
| Name of Grantee: | Inpeco Spa a Socio Unico |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Barcode Label Printer |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0084 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 10/28/2014 Application Dated: 10/27/2014 |
| Inpeco Spa a Socio Unico |
| Via Givoletto 15 |
| Val della Torre Torino, 10040 Italy |
| Attention: Cristian Leotta , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Y2K-PROTUBE001 |
| Name of Grantee: | Inpeco Spa a Socio Unico |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PROTUBE WIFI-BT |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0084 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 4MqAlrzzZGkp8q+NcKpc7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inpeco Spa a Socio Unico Via Givoletto 15 Val della Torre Torino, 10040 Italy |
Date of Grant: 10/28/2014 Application Dated: 10/27/2014 |
| Attention: Cristian Leotta , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Y2K-PROTUBE001 |
| Name of Grantee: | Inpeco Spa a Socio Unico |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PROTUBE WIFI-BT |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0084 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |