FCC ID Y3D-RED4S
RFID Module
by Phychips Inc.
Grantee Code: Y3D Product Code: RED4S
Latest application date: 2019-01-22
FCC ID Device Details
| FCC ID | Y3D-RED4S |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | Y3D |
| Product Code | RED4S |
| Applicant Business | Phychips Inc. 🇰🇷 |
| Related Domains |  phychips.com |
| Equipment Class | RFID Module |
| Test Firm | DT&C; Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 917.1-926.9 MHz | Class II permissive change or modification of presently authorized equipment | 2019-01-22 |
| 917.1-926.9 MHz | Original Equipment | 2018-03-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2018-09-01 | PDF 323.1 KB |
| Internal Photos | Internal Photos | 2019-07-21 | PDF 1,011.9 KB |
| Internal Photos | Internal Photos | 2018-09-01 | PDF 1.2 MB |
| External Photos | External Photos | 2019-01-22 | PDF 332.1 KB |
| External Photos | External Photos | 2018-09-01 | PDF 4.1 MB |
| Label Sample Location | ID Label/Location Info | 2018-03-05 | PDF 60.2 KB |
| Test Setup Photos | Test Setup Photos | 2019-01-22 | PDF 257.9 KB |
| Test Setup Photos | Test Setup Photos | 2018-09-01 | PDF 1.2 MB |
| Test Report | Test Report | 2019-01-22 | PDF 1.8 MB |
| Test Report DSS | Test Report | 2018-03-05 | PDF 1.3 MB |
| Agent Authorization Letter | Cover Letter(s) | 2019-01-22 | PDF 88.2 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2019-01-22 | PDF 113.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2019-01-22 | PDF 117.9 KB |
| Authorization Letter | Cover Letter(s) | 2018-03-05 | PDF 118.7 KB |
| Confidentiality Request | Cover Letter(s) | 2018-03-05 | PDF 12.3 KB |
| Modular Approval Letter | Cover Letter(s) | 2018-03-05 | PDF 12.1 KB |
| MPE Calculation | RF Exposure Info | 2018-03-05 | PDF 104.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 36.2 KB | |
| Schematics Metadata only | Schematics | PDF 570.2 KB | |
| Schematics Metadata only | Schematics | PDF 1.7 MB | |
| Schematics Part Location Metadata only | Schematics | PDF 162.9 KB | |
| Schematics Part Location Metadata only | Schematics | PDF 513.6 KB | |
| Antenna Specification OpDes Metadata only | Operational Description | PDF 587.3 KB | |
| Operational Description Metadata only | Operational Description | PDF 695.4 KB | |
| Operational Description - Description Related to Change Metadata only | Operational Description | PDF 401.5 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 36.1 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 577.6 KB |
Application Information
| Application ID | Vu/6dA+vQCkDuNM9zCFC3w== |
|---|---|
| Final Action Date | 2019-01-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020381604 |
| Model | RED4S |
| Frequency Range | 917.1-926.9 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID Module |
| Responsible Party | Khyungjoo Min, Principal Research Engineer, kjmin@phychips.com , +82-42-864-2402 |
| Test Firm | Lee Su-jeong, DT&C; Co., Ltd., gungmin0524@dtnc.net  , 82-31-321-2664 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 07/21/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval. Power listed is conducted. Approval is limited to OEM installation only and must be professionally installed. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device shall only be connected to devices described in the application documents. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is incorporated into a finished product. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. A separation distance of 20 cm must be maintained between the radiating elements and all persons. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Vu/6dA+vQCkDuNM9zCFC3w== | 2019-01-22 | Class II permissive change or modification of presently authorized equipment |
| UyZ922i2krihv8yJfuqISw== | 2018-03-05 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 917.1-926.9 MHz | 0.4380000 | 15C |
Grants
TCB Grant - Application Vu/6dA+vQCkDuNM9zCFC3w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/22/2019 Application Dated: 01/21/2019 |
| Phychips Inc. |
| (Yongsan-dong), Migun Technoworld 2, A-104, 187, |
| Techno 2-ro, Yuseong-gu, |
| Daejeon,, South Korea |
| Attention: Khyungjoo Min , Principal Research Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Y3D-RED4S |
| Name of Grantee: | Phychips Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.1 - 926.9 | 0.438 |
| Limited Modular Approval. Power listed is conducted. Approval is limited to OEM installation only and must be professionally installed. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device shall only be connected to devices described in the application documents. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is incorporated into a finished product. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. A separation distance of 20 cm must be maintained between the radiating elements and all persons. |
EAS Grant - Application Vu/6dA+vQCkDuNM9zCFC3w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Phychips Inc. (Yongsan-dong), Migun Technoworld 2, A-104, 187, Techno 2-ro, Yuseong-gu, Daejeon,, South Korea |
Date of Grant: 01/22/2019 Application Dated: 01/21/2019 |
| Attention: Khyungjoo Min , Principal Research Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Y3D-RED4S |
| Name of Grantee: | Phychips Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.1 - 926.9 | 0.438 |
| Limited Modular Approval. Power listed is conducted. Approval is limited to OEM installation only and must be professionally installed. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device shall only be connected to devices described in the application documents. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is incorporated into a finished product. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. A separation distance of 20 cm must be maintained between the radiating elements and all persons. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/05/2018 Application Dated: 03/05/2018 |
| Phychips Inc. |
| (Yongsan-dong), Migun Technoworld 2, A-104, 187, |
| Techno 2-ro, Yuseong-gu, |
| Daejeon,, South Korea |
| Attention: Khyungjoo Min , Principal Research Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Y3D-RED4S |
| Name of Grantee: | Phychips Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.1 - 926.9 | 0.438 |
| Limited Modular Approval. Power listed is conducted. Approval is limited to OEM installation only and must be professionally installed. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device shall only be connected to devices described in the application documents. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is incorporated into a finished product. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. A separation distance of 20 cm must be maintained between the radiating elements and all persons. |
EAS Grant - Application UyZ922i2krihv8yJfuqISw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Phychips Inc. (Yongsan-dong), Migun Technoworld 2, A-104, 187, Techno 2-ro, Yuseong-gu, Daejeon,, South Korea |
Date of Grant: 03/05/2018 Application Dated: 03/05/2018 |
| Attention: Khyungjoo Min , Principal Research Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Y3D-RED4S |
| Name of Grantee: | Phychips Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.1 - 926.9 | 0.438 |
| Limited Modular Approval. Power listed is conducted. Approval is limited to OEM installation only and must be professionally installed. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device shall only be connected to devices described in the application documents. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is incorporated into a finished product. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. A separation distance of 20 cm must be maintained between the radiating elements and all persons. |
| Mail To: |