TCB Grant - Application mKwsviVUKuC8aOHspixRGg==
This application does not exist.
EAS Grant - Application mKwsviVUKuC8aOHspixRGg==
This application currently is not in final status.
TCB Grant - Application a38ScfpebROyo4e8vjVWdg==
| TCB |
GRANT OF EQUIPMENT
AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
|
Date of Grant: 02/18/2011
Application Dated: 02/18/2011
|
| Dfine Technology Co., Ltd. |
| 4th Floor Building A2, Tianfu Software Park, No 76 |
Chengdu, 610041
China |
| |
| Attention: Jing Gao , Deputy secretary |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
Y48JDHMDZ-D1AR |
|
|
| Name of Grantee: |
Dfine Technology Co., Ltd. |
|
|
| Equipment Class: |
Unlicensed National Information Infrastructure TX |
| Notes: |
WHDI Wireless Transceiver Module (Rx) |
| Modular Type: |
Single Modular |
| Grant Notes
| FCC Rule Parts
| Frequency
Range (MHZ)
| Output
Watts
| Frequency
Tolerance
| Emission
Designator
|
| MO |
15E |
5755.0
-
5795.0
|
0.03013
|
|
|
| Power output is conducted. Modular Approval for mobile RF Exposure conditions. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| MO: |
This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application a38ScfpebROyo4e8vjVWdg==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT
AUTHORIZATION |
COPY |
| Certification |
Dfine Technology Co., Ltd.
4th Floor Building A2, Tianfu Software Park, No 76
P.O. Box ,
Chengdu, 610041
China
|
|
Date of Grant: 02/18/2011
Application Dated: 02/18/2011
|
| |
| Attention: Jing Gao , Deputy secretary |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
Y48JDHMDZ-D1AR |
|
|
| Name of Grantee: |
Dfine Technology Co., Ltd. |
|
|
| Equipment Class: |
Unlicensed National Information Infrastructure TX |
| Notes: |
WHDI Wireless Transceiver Module (Rx) |
| Modular Type: |
Single Modular |
| Grant Notes
| FCC Rule Parts
| Frequency
Range (MHZ)
| Output
Watts
| Frequency
Tolerance
| Emission
Designator
|
| MO |
15E |
5755.0
-
5795.0
|
0.03013
|
|
|
| Power output is conducted. Modular Approval for mobile RF Exposure conditions. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| MO: |
This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
dfine-tech.com
, 08675533320018