FCC ID YAISB35

Wireless SOM Module

by InnoComm Mobile Technology Corporation

Grantee Code: YAI   Product Code: SB35
Latest application date: 2022-08-10

FCC ID Device Details

FCC IDYAISB35
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYAI
Product CodeSB35
Applicant BusinessInnoComm Mobile Technology Corporation 🇹🇼
Related Domains innocomm.com
Equipment ClassWireless SOM Module
Test FirmUnderwriters Laboratories Taiwan Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2022-08-10
2402-2480 MHzOriginal Equipment2022-08-10
2402-2480 MHzOriginal Equipment2022-08-10

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2022-08-10PDF 1.5 MB
Internal PhotoInternal Photos2022-08-10PDF 731.8 KB
Internal PhotosInternal Photos2022-08-10PDF 731.8 KB
External PhotoExternal Photos2022-08-10PDF 1.4 MB
External PhotosExternal Photos2022-08-10PDF 1.4 MB
ID Label and Location InfoID Label/Location Info2022-08-10PDF 101.8 KB
Setup photosTest Setup Photos2022-08-10PDF 1.3 MB
Test Setup PhotosTest Setup Photos2022-08-10PDF 1.3 MB
Antenna Specification_Dipole AntennaTest Report2022-08-10PDF 403 KB
Antenna Specification_PCB AntennaTest Report2022-08-10PDF 1.4 MB
Test Report_MPERF Exposure Info2022-08-10PDF 329.1 KB
Test report_15.247 BLETest Report2022-08-10PDF 5.1 MB
Test report_15.247 BT EDRTest Report2022-08-10PDF 5.6 MB
Test report_15.247 WiFi_Part1Test Report2022-08-10PDF 5.4 MB
Test report_15.247 WiFi_Part2Test Report2022-08-10PDF 5.5 MB
Test report_15.247 WiFi_Part3Test Report2022-08-10PDF 5.4 MB
Test report_15.247 WiFi_Part4Test Report2022-08-10PDF 4.4 MB
Test report_15.407 DFSTest Report2022-08-10PDF 804 KB
Test report_15.407_Part1Test Report2022-08-10PDF 5.3 MB
Test report_15.407_Part2Test Report2022-08-10PDF 5.5 MB
Test report_15.407_Part3Test Report2022-08-10PDF 5.3 MB
Test report_15.407_Part4Test Report2022-08-10PDF 5.5 MB
Test report_15.407_Part5Test Report2022-08-10PDF 5.3 MB
Test report_15.407_Part6Test Report2022-08-10PDF 3.7 MB
Confidentiality RequestCover Letter(s)2022-08-10PDF 278.2 KB
Declaration Letter_WLAN Ch 12-13Cover Letter(s)2022-08-10PDF 195.6 KB
Modular Approval ChecklistCover Letter(s)2022-08-10PDF 528.5 KB
POACover Letter(s)2022-08-10PDF 218.9 KB
UNII DeclarationCover Letter(s)2022-08-10PDF 190.3 KB
Tesr Repot_MPERF Exposure Info2022-08-10PDF 329.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 115.5 KB
Schematics Metadata onlySchematicsPDF 902.5 KB
5G Software Security Metadata onlyOperational DescriptionPDF 527 KB
Operational Description Metadata onlyOperational DescriptionPDF 252.1 KB
Software Security Metadata onlySDR Software/Security InfPDF 527 KB

Application Information

Application IDZBlX2Ac3jxgEYrfxLX09sg==
Final Action Date2022-08-10
Application PurposeOriginal Equipment
Applicant FRN0019692490
ModelSB35
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless SOM Module
Responsible PartyBruno Tsai, Product manager, bruno.tsai@innocomm.com , 886-3-5781868
Test FirmRoy Chen, Underwriters Laboratories Taiwan Co., Ltd., Roy.Chen@ul.com , +886-2-7737-3000
TCB Emailvina.kerai@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is conducted. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
ZBlX2Ac3jxgEYrfxLX09sg==2022-08-10Original Equipment
Hd2N4UFMWW4I5t9A9RPpqA==2022-08-10Original Equipment
51XdhYrp+2FtujP8QoR9YQ==2022-08-10Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002000015CCC
2402-2480 MHz0.002115CCC
2412-2462 MHz0.629515CCC, MO
5180-5240 MHz0.121615ECC, MO
5260-5320 MHz0.170215ECC, MO, ND
5500-5700 MHz0.175815ECC, MO, ND
5745-5825 MHz0.091615ECC, MO

Grants

TCB Grant - Application ZBlX2Ac3jxgEYrfxLX09sg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 08/10/2022

Application Dated: 08/10/2022
InnoComm Mobile Technology Corporation
3F, No. 6, Hsin Ann Rd., Hsinchu Science Park,
Hsinchu, 300092
Taiwan
 
Attention: Bruno Tsai , Product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YAISB35
Name of Grantee:  InnoComm Mobile Technology Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless SOM Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.1216  
CC MO ND 15E 5260.0  -  5320.0 0.1702  
CC MO ND 15E 5500.0  -  5700.0 0.1758  
CC MO 15E 5745.0  -  5825.0 0.0916  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ZBlX2Ac3jxgEYrfxLX09sg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

InnoComm Mobile Technology Corporation
3F, No. 6, Hsin Ann Rd., Hsinchu Science Park,
Hsinchu, 300092
Taiwan
  Date of Grant: 08/10/2022

Application Dated: 08/10/2022
 
Attention: Bruno Tsai , Product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YAISB35
Name of Grantee:  InnoComm Mobile Technology Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless SOM Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.1216  
CC MO ND 15E 5260.0  -  5320.0 0.1702  
CC MO ND 15E 5500.0  -  5700.0 0.1758  
CC MO 15E 5745.0  -  5825.0 0.0916  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application Hd2N4UFMWW4I5t9A9RPpqA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 08/10/2022

Application Dated: 08/10/2022
InnoComm Mobile Technology Corporation
3F, No. 6, Hsin Ann Rd., Hsinchu Science Park,
Hsinchu, 300092
Taiwan
 
Attention: Bruno Tsai , Product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YAISB35
Name of Grantee:  InnoComm Mobile Technology Corporation
Equipment Class: Digital Transmission System
Notes: Wireless SOM Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0021  
CC MO 15C 2412.0  -  2462.0 0.6295  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Hd2N4UFMWW4I5t9A9RPpqA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

InnoComm Mobile Technology Corporation
3F, No. 6, Hsin Ann Rd., Hsinchu Science Park,
Hsinchu, 300092
Taiwan
  Date of Grant: 08/10/2022

Application Dated: 08/10/2022
 
Attention: Bruno Tsai , Product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YAISB35
Name of Grantee:  InnoComm Mobile Technology Corporation
Equipment Class: Digital Transmission System
Notes: Wireless SOM Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0021  
CC MO 15C 2412.0  -  2462.0 0.6295  

Single Modular Approval. Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 51XdhYrp+2FtujP8QoR9YQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 08/10/2022

Application Dated: 08/10/2022
InnoComm Mobile Technology Corporation
3F, No. 6, Hsin Ann Rd., Hsinchu Science Park,
Hsinchu, 300092
Taiwan
 
Attention: Bruno Tsai , Product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YAISB35
Name of Grantee:  InnoComm Mobile Technology Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless SOM Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  

Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 51XdhYrp+2FtujP8QoR9YQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

InnoComm Mobile Technology Corporation
3F, No. 6, Hsin Ann Rd., Hsinchu Science Park,
Hsinchu, 300092
Taiwan
  Date of Grant: 08/10/2022

Application Dated: 08/10/2022
 
Attention: Bruno Tsai , Product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YAISB35
Name of Grantee:  InnoComm Mobile Technology Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless SOM Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  

Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: