FCC ID YAMPD79XEXVHF

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089

Date of Grant: 02/27/2015 Application Dated: 02/27/2015

Hytera Communications Corporation Limited

Hytera Tower, Hi-Tech Industrial Park North,

9108# Beihuan Road, Nanshan District,

Shenzhen, 518057 China

Attention: Tiantian Chen , Certification Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	YAMPD79XEXVHF
Name of Grantee:	Hytera Communications Corporation Limited
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Ex Digital Radio

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF ES	90	136.0  -  174.0	1.13	0.23  PM	10K0F3E
EF ES	90	136.0  -  174.0	1.14	0.23  PM	7K40FXD

Class II Permissive Change documented in this filing. Power output listed is conducted. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled Exposure limit and requirements. Body-worn compliance is limited to the specific belt-clip and accessories defined in this filing. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn SAR compliance is limited to the specific belt-clip and accessory configurations tested for this filing and must provide at least 2.5 cm separation between the device and the user's body. The highest reported SAR values are Head: 0.18 W/kg, Body-worn: 0.27 W/kg when operating at 50% duty cycle.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES:	This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Hytera Communications Corporation Limited Hytera Tower, Hi-Tech Industrial Park North, 9108# Beihuan Road, Nanshan District, Shenzhen, 518057 China

Date of Grant: 02/27/2015 Application Dated: 02/27/2015

Attention: Tiantian Chen , Certification Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	YAMPD79XEXVHF
Name of Grantee:	Hytera Communications Corporation Limited
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Ex Digital Radio
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF ES	90	136.0  -  174.0	1.13	0.23  PM	10K0F3E
EF ES	90	136.0  -  174.0	1.14	0.23  PM	7K40FXD

Class II Permissive Change documented in this filing. Power output listed is conducted. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled Exposure limit and requirements. Body-worn compliance is limited to the specific belt-clip and accessories defined in this filing. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn SAR compliance is limited to the specific belt-clip and accessory configurations tested for this filing and must provide at least 2.5 cm separation between the device and the user's body. The highest reported SAR values are Head: 0.18 W/kg, Body-worn: 0.27 W/kg when operating at 50% duty cycle.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES:	This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

TCB Grant - Application EQckzbdJ12bZKAK1R9/8FA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089

Date of Grant: 12/27/2012 Application Dated: 12/27/2012

Hytera Communications Corporation Ltd.

Hyt Tower, Hi-Tech Industrial Park North

Nanshan District, Shenzhen, 518057 China

Attention: Lei Xiong

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	YAMPD79XEXVHF
Name of Grantee:	Hytera Communications Corporation Ltd.
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Ex Digital Radio

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	90	136.0  -  174.0	1.13	0.23  PM	10K0F3E
EF	90	136.0  -  174.0	1.14	0.23  PM	7K40FXD

Power output listed is conducted. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled Exposure limit and requirements. Body-worn compliance is limited to the specific belt-clip and accessories defined in this filing. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Hytera Communications Corporation Ltd. Hyt Tower, Hi-Tech Industrial Park North Nanshan District, Shenzhen, 518057 China

Date of Grant: 12/27/2012 Application Dated: 12/27/2012

Attention: Lei Xiong

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	YAMPD79XEXVHF
Name of Grantee:	Hytera Communications Corporation Ltd.
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Ex Digital Radio
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	90	136.0  -  174.0	1.13	0.23  PM	10K0F3E
EF	90	136.0  -  174.0	1.14	0.23  PM	7K40FXD

Power output listed is conducted. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled Exposure limit and requirements. Body-worn compliance is limited to the specific belt-clip and accessories defined in this filing. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To: