1. FCC ID
  2. YDA
  3. YDABTS6000HP

FCC ID YDABTS6000HP

GSM 6000 Base Transceiver Station

by Kapsch CarrierCom France S.A.S

Grantee Code: YDA   Product Code: BTS6000HP
Latest application date: 2010-06-29

FCC ID Device Details

FCC IDYDABTS6000HP
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYDA
Product CodeBTS6000HP
Applicant BusinessKapsch CarrierCom France S.A.S 🇫🇷
Related Domains kapsch.net
Equipment ClassGSM 6000 Base Transceiver Station
Test FirmLCIE

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
869.2-893.8 MHzChange in identification of presently authorized equipment. Original FCC ID: AB6BTS6000HP Grant Date: 08/06/20082010-06-29

Exhibits

DocumentTypeAvailableFile
GSM 6000 BTS external photosExternal Photos2010-06-29PDF 810.9 KB
ID label & locationID Label/Location Info2010-06-29PDF 68.6 KB
Kapsch FCC ID product listID Label/Location Info2010-06-29PDF 36.1 KB
GSM 6000 BTS Grant commentsAttestation Statements2010-06-29PDF 28.3 KB
Kapsch acceptance letterCover Letter(s)2010-06-29PDF 417.6 KB
Nortel release letterCover Letter(s)2010-06-29PDF 71.5 KB

Application Information

Application IDYntaZnzVxHvS0NA49yxLDg==
Final Action Date2010-06-29
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: AB6BTS6000HP Grant Date: 08/06/2008
Applicant FRN0019601368
ModelBTS6000HP
Frequency Range869.2-893.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionGSM 6000 Base Transceiver Station
Responsible PartyAlain CAILLE, GSM HW Product Integrity & Regulatory Engineer, Alain.Caille@kapsch.net , +33 (0)1 69 55 3515
Technical ContactAlain CAILLE, Kapsch CarrierCom France S.A.S, alain.caille@kapsch.net , 33(0)169553515
Non-Technical ContactDaniel COUDERC, Kapsch CarrierCom France S.A.S, daniel.couderc@kapsch.net , 33(0)169553530
Test FirmSandie Caudal, LCIE, sandie.caudal@lcie.fr , 00-33-1-40-95-62-28
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPowers listed are conducted. The equipment can be configured in the PCS1900 and GSM850 bands, respectively with the following radio Module : RM 30W PCS1900(Hardware Code NTN050PM ), RM2 30W PCS1900(Hardware Code NTN050CP ), RM2 50W PCS1900(Hardware Code NTN050PP), HPRM 60W GSM850 (Hardware Code NTN050JA),and with following coupling devices Dual Diplexer Module (DDM), Hybrid H2 DDM , TxFilter (TxF) , H2 TxF , in both GMSK and 8PSK modulation techniques. To comply with the FCC spurious emissions requirements, all configurations must be configured with the following restrictions. FCC Rule Part 22 Subpart H: The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values are required for edge channels [ARFCN 128, 131, 133, 181, 183, 231, 233, 251] for the following GSM850 configurations: Configurations in GMSK Modulation: 6dB power reduction [DDM &TxF; configuration], 2dB power reduction [H2 DDM & H2 TxF configuration]. Configurations in 8PSK Modulation: 4dB power reduction [DDM & TxF configuration], FCC Rule Part 24 Subpart E. The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values for the following PCS1900 RM (30W) configurations are: Configurations in GMSK Modulation: 2dB power reduction [DDM &TxF; configuration] Configurations in 8PSK Modulation: 2dB power reduction [DDM &TxF; configuration]. The power reduction values for the following PCS1900 RM2 (30W) configurations are: Configurations in GMSK Modulation: 4dB power reduction [DDM &TxF; configuration], 2dB power reduction [H2 DDM & H2 TxF configuration] Configurations in 8PSK Modulation: 2dB power reduction [DDM &TxF; configuration]. The power reduction values for the following PCS1900 RM2 (50W) configurations are: Configurations in GMSK Modulation: 6dB power reduction [DDM &TxF; configuration], 4dB power reduction [H2 DDM & H2 TxF configuration] Configurations in 8PSK Modulation: 4dB power reduction [DDM &TxF; configuration]. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Applications

Application IDDatePurpose
YntaZnzVxHvS0NA49yxLDg==2010-06-29Change in identification of presently authorized equipment. Original FCC ID: AB6BTS6000HP Grant Date: 08/06/2008

Equipment Authorization

FrequencyOutputToleranceEmissionRules
869.2-893.8 MHz53.745Hz300KGXW22H
869.2-893.8 MHz43.6545Hz300KG7W22H
1930.2-1989.8 MHz38.990Hz300KGXW24E
1930.2-1989.8 MHz26.390Hz300KG7W24E

Grants

TCB Grant - Application YntaZnzVxHvS0NA49yxLDg==

This application does not exist.

EAS Grant - Application YntaZnzVxHvS0NA49yxLDg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Kapsch CarrierCom France S.A.S
23, rue du Roule, 75001 Paris, France (Administrat Parc d?activités de Magny-Chateaufort,78928 YvelinP.O. Box ,
Paris,
France 		  Date of Grant: 06/29/2010

Application Dated: 06/16/2010
 
Attention: Alain CAILLE , GSM HW Product Integrity & Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YDABTS6000HP
Name of Grantee:  Kapsch CarrierCom France S.A.S
Equipment Class: PCS Licensed Transmitter
Notes: GSM 6000 Base Transceiver Station
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 869.2  -  893.8 53.7 45.0  Hz 300KGXW
22H 869.2  -  893.8 43.65 45.0  Hz 300KG7W
24E 1930.2  -  1989.8 38.9 90.0  Hz 300KGXW
24E 1930.2  -  1989.8 26.3 90.0  Hz 300KG7W

Powers listed are conducted.

The equipment can be configured in the PCS1900 and GSM850 bands, respectively with the following radio Module : RM 30W PCS1900(Hardware Code NTN050PM ), RM2 30W PCS1900(Hardware Code NTN050CP ), RM2 50W PCS1900(Hardware Code NTN050PP), HPRM 60W GSM850 (Hardware Code NTN050JA),and with following coupling devices Dual Diplexer Module (DDM), Hybrid H2 DDM , TxFilter (TxF) , H2 TxF , in both GMSK and 8PSK modulation techniques.

To comply with the FCC spurious emissions requirements, all configurations must be configured with the following restrictions.

FCC Rule Part 22 Subpart H: The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values are required for edge channels [ARFCN 128, 131, 133, 181, 183, 231, 233, 251] for the following GSM850 configurations: Configurations in GMSK Modulation: 6dB power reduction [DDM &TxF configuration], 2dB power reduction [H2 DDM & H2 TxF configuration]. Configurations in 8PSK Modulation: 4dB power reduction [DDM & TxF configuration],

FCC Rule Part 24 Subpart E. The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing.

The power reduction values for the following PCS1900 RM (30W) configurations are: Configurations in GMSK Modulation: 2dB power reduction [DDM &TxF configuration] Configurations in 8PSK Modulation: 2dB power reduction [DDM &TxF configuration].

The power reduction values for the following PCS1900 RM2 (30W) configurations are: Configurations in GMSK Modulation: 4dB power reduction [DDM &TxF configuration], 2dB power reduction [H2 DDM & H2 TxF configuration] Configurations in 8PSK Modulation: 2dB power reduction [DDM &TxF configuration].

The power reduction values for the following PCS1900 RM2 (50W) configurations are: Configurations in GMSK Modulation: 6dB power reduction [DDM &TxF configuration], 4dB power reduction [H2 DDM & H2 TxF configuration] Configurations in 8PSK Modulation: 4dB power reduction [DDM &TxF configuration].

RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).



Mail To: