FCC ID YE3600-AX210D2
Rugged Handheld Tablet
by DT Research, Inc.
Grantee Code: YE3 Product Code: 600AX210D2
Latest application date: 2024-08-22
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-08-22 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-08-22 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2024-08-22 |
| 2422-2452 MHz | Class II permissive change or modification of presently authorized equipment | 2023-06-06 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2023-06-06 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-06-05 |
| 6025-6985 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 02/18/2021 | 2023-03-14 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 | 2023-03-14 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 | 2023-03-14 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 | 2023-03-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2025-02-19 | PDF 616.3 KB |
| Label Location | Users Manual | 2023-12-03 | PDF 1.1 MB |
| User Manual | Users Manual | 2023-12-03 | PDF 293.2 KB |
| user manual | Users Manual | 2023-12-03 | PDF 1.1 MB |
| User Manual | Users Manual | 2023-03-14 | PDF 2.6 MB |
| Internal Photo | Internal Photos | 2025-02-19 | PDF 1.8 MB |
| Internal Photo | Internal Photos | 2023-12-03 | PDF 2.1 MB |
| Internal Photos | Internal Photos | 2023-12-03 | PDF 2.1 MB |
| External Photo | External Photos | 2025-02-19 | PDF 475.3 KB |
| Label Location | External Photos | 2025-02-19 | PDF 408.7 KB |
| Lable Location | External Photos | 2025-02-19 | PDF 408.7 KB |
| External Photo | External Photos | 2023-12-03 | PDF 758.2 KB |
| External Photos | External Photos | 2023-12-03 | PDF 642.3 KB |
| External Photos | External Photos | 2023-03-14 | PDF 101.9 KB |
| Label | ID Label/Location Info | 2024-08-22 | PDF 68.6 KB |
| Label Location | Cover Letter(s) | 2024-08-22 | PDF 44.6 KB |
| Label | ID Label/Location Info | 2023-06-06 | PDF 265.7 KB |
| Label Information | ID Label/Location Info | 2023-03-14 | PDF 91.5 KB |
| Label Location | ID Label/Location Info | 2023-03-14 | PDF 91.5 KB |
| Label Sample | ID Label/Location Info | 2023-03-14 | PDF 21.4 KB |
| Setup Photo | Test Setup Photos | 2025-02-19 | PDF 632.1 KB |
| Setup Photo | Test Setup Photos | 2023-12-03 | PDF 364.2 KB |
| Test Setup Photo | Test Setup Photos | 2023-12-03 | PDF 758.2 KB |
| Test Setup Photos | Test Setup Photos | 2023-12-03 | PDF 364.2 KB |
| Antenna Specification Metadata only | Test Report | 2024-08-22 | PDF 1.6 MB |
| Antenna Specification | Test Report | 2024-08-22 | PDF 2.2 MB |
| Test Report | Test Report | 2024-08-22 | PDF 1.1 MB |
| Test Report | Test Report | 2024-08-22 | PDF 2.3 MB |
| Test Report | Test Report | 2024-08-22 | PDF 3.9 MB |
| SAR Test Report | RF Exposure Info | 2023-06-06 | PDF 2.9 MB |
| Test Report | Test Report | 2023-06-06 | PDF 3.7 MB |
| Test Report | Test Report | 2023-06-06 | PDF 5.2 MB |
| Declaration Letter | Attestation Statements | 2024-08-22 | PDF 267 KB |
| US Agent for Service of Process | Attestation Statements | 2024-08-22 | PDF 271 KB |
| Declaration Letter | Attestation Statements | 2023-06-06 | PDF 56.9 KB |
| PCII Change Request Letter | Attestation Statements | 2023-06-06 | PDF 71.9 KB |
| US Agent | Attestation Statements | 2023-06-06 | PDF 22.5 KB |
| US Agent for Service of Process | Attestation Statements | 2023-06-06 | PDF 22.5 KB |
| Attestation pt 2.911(d)(5)(i) | Attestation Statements | 2023-03-14 | PDF 374.7 KB |
| Attestation pt 2.911(d)(5)(ii) | Attestation Statements | 2023-03-14 | PDF 349.7 KB |
| Attestation pt 2.911(d)(7) | Attestation Statements | 2023-03-14 | PDF 180.9 KB |
| Attestation pt 2.911(d)(i) | Attestation Statements | 2023-03-14 | PDF 374.7 KB |
| Attestation pt 2.911(d)(ii) | Attestation Statements | 2023-03-14 | PDF 349.7 KB |
| FCC Authority letter | Cover Letter(s) | 2024-08-22 | PDF 61.1 KB |
| FCC Confidentiality Letter | Cover Letter(s) | 2024-08-22 | PDF 60.4 KB |
| PCII change request letter | Cover Letter(s) | 2024-08-22 | PDF 23.6 KB |
| Authorization Letter | Cover Letter(s) | 2023-06-06 | PDF 18.2 KB |
| Confidentiality Letter | Cover Letter(s) | 2023-06-06 | PDF 19.4 KB |
| FCC Authority letter | Cover Letter(s) | 2023-06-06 | PDF 18.2 KB |
| PCII change request letter | Cover Letter(s) | 2023-06-06 | PDF 71.9 KB |
| Authorization Letter | Cover Letter(s) | 2023-03-14 | PDF 465.5 KB |
| Authorization of ID Change | Cover Letter(s) | 2023-03-14 | PDF 97 KB |
| Confidentiality Request | Cover Letter(s) | 2023-03-14 | PDF 575.6 KB |
| Declaration of Authorization | Cover Letter(s) | 2023-03-14 | PDF 465.5 KB |
| Declaration of ID Change | Cover Letter(s) | 2023-03-14 | PDF 463.7 KB |
| ID Change Declaration | Cover Letter(s) | 2023-03-14 | PDF 463.7 KB |
| RF Exposure Info | RF Exposure Info | 2024-08-22 | PDF 1.5 MB |
| Calibration Certificate | RF Exposure Info | 2023-06-06 | PDF 5.2 MB |
| MPE | RF Exposure Info | 2023-06-06 | PDF 2.9 MB |
| Block Diagram Metadata only | Block Diagram | PDF 484.8 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 560.6 KB | |
| SCH Metadata only | Schematics | PDF 2.6 MB | |
| SCH Metadata only | Schematics | PDF 2.5 MB | |
| Schematics Metadata only | Schematics | PDF 2.6 MB | |
| Schematics Diagram Metadata only | Schematics | PDF 2.6 MB | |
| Operation Description Metadata only | Operational Description | PDF 125.3 KB | |
| Operational Description Metadata only | Operational Description | PDF 101.3 KB | |
| Operational Description Metadata only | Operational Description | PDF 125.3 KB | |
| SDR Software Info. Metadata only | SDR Software/Security Info. | PDF 117.5 KB | |
| Software Security Metadata only | SDR Software/Security Inf | PDF 2.6 MB | |
| Software Security Description Metadata only | SDR Software/Security Inf | PDF 117.5 KB | |
| Tune up Metadata only | Parts List/Tune Up Info | PDF 102.8 KB | |
| Tune up Metadata only | Parts List/Tune Up Info | PDF 148.4 KB | |
| Tune up Procedure Metadata only | Parts List/Tune Up Info | PDF 102.8 KB |
Application Information
| Application ID | KB87zj3xtlBaA8sNpALRhA== |
|---|---|
| Final Action Date | 2024-08-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019830793 |
| Model | 600-AX210D2 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Rugged Handheld Tablet |
| Responsible Party | JS Hsu, js_hsu@dtri.com  , 886-2-2298-1039 |
| Technical Contact | Keny Xu, SGS-CSTC Standards Technical Services Co., Ltd., keny.xu@sgs.com  , 075525328629 |
| Non-Technical Contact | Keny Xu, SGS-CSTC Standards Technical Services Co., Ltd., keny.xu@sgs.com , 075525328629 |
| Test Firm | Keny Xu, SGS-CSTC Standards Technical Services Co., Ltd. Sh, Keny.Xu@sgs.com , +86 (0)755 2532 8629 |
| TCB Email | USCTS.TCB@SGS.COM |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 02/19/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Model: DT362DN), changed the antenna into a portable device, contained granted module FCC ID: YE3600-AX210D2 and performed Radiated Spurious Emissions, Conducted Emissions at AC power line and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 0.17W/kg and 1.41W/kg respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| KB87zj3xtlBaA8sNpALRhA== | 2024-08-22 | Class II permissive change or modification of presently authorized equipment |
| 9mb5rr95gZrUiDyhjnjufQ== | 2024-08-22 | Class II permissive change or modification of presently authorized equipment |
| 57oNwBM03X5yKL+ZZi86Jg== | 2024-08-22 | Class II permissive change or modification of presently authorized equipment |
| a3/rpPI/hPfoHYR4cYSN6g== | 2023-06-06 | Class II permissive change or modification of presently authorized equipment |
| Da6R13+pztpo/S94s4tIkQ== | 2023-06-06 | Class II permissive change or modification of presently authorized equipment |
| we02OAx8ddtE7Y2FDX3fAw== | 2023-06-05 | Class II permissive change or modification of presently authorized equipment |
| sZLBohs5lRre6lkyN6dAAA== | 2023-03-14 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 02/18/2021 |
| e9DAWB3Z70thZdDTB1uVFw== | 2023-03-14 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 |
| Q0duW/+mPI2djM0VncavWw== | 2023-03-14 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 |
| Ig4ADI8RYSHhG8YvqvbnTQ== | 2023-03-14 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 |
| 5seH7tEr0p3U8d+2Wkbi+A== | 2023-03-14 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.009 | 15C | CC |
| 2402-2480 MHz | 0.0130000 | 15C | CC |
| 2412-2462 MHz | 0.787 | 15C | CC, MO |
| 2412-2472 MHz | 0.787 | 15C | CC, MO |
| 2422-2452 MHz | 0.601 | 15C | CC, MO |
| 2422-2462 MHz | 0.601 | 15C | CC, MO |
| 5180-5240 MHz | 0.219 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.162 | 15E | CC, MO, ND |
| 5500-5720 MHz | 0.243 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.248 | 15E | CC, MO, ND |
| 5955-7115 MHz | 0.003 | 15E | CC, MO |
| 5965-7085 MHz | 0.007 | 15E | CC, MO |
| 5985-7025 MHz | 0.013 | 15E | CC, MO |
| 6025-6985 MHz | 0.025 | 15E | CC, MO |
Grants
TCB Grant - Application we02OAx8ddtE7Y2FDX3fAw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 06/05/2023 Application Dated: 06/05/2023 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Rugged Tablet |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host (Rugged Tablet, DT361xxxx(x=0-9, A-Z, or null, or ., or /), DT361DM), change the antenna and perform Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.55W/kg respectively. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application we02OAx8ddtE7Y2FDX3fAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 06/05/2023 Application Dated: 06/05/2023 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Rugged Tablet |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host (Rugged Tablet, DT361xxxx(x=0-9, A-Z, or null, or ., or /), DT361DM), change the antenna and perform Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.55W/kg respectively. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/14/2023 Application Dated: 03/13/2023 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | 1TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5955.0 - 7115.0 | 0.003 | ||
| CC MO | 15E | 5965.0 - 7085.0 | 0.007 | ||
| CC MO | 15E | 5985.0 - 7025.0 | 0.013 | ||
| CC MO | 15E | 6025.0 - 6985.0 | 0.025 |
| Power Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.32 W/kg and 0.64 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 17mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application sZLBohs5lRre6lkyN6dAAA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 03/14/2023 Application Dated: 03/13/2023 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | 1TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5955.0 - 7115.0 | 0.003 | ||
| CC MO | 15E | 5965.0 - 7085.0 | 0.007 | ||
| CC MO | 15E | 5985.0 - 7025.0 | 0.013 | ||
| CC MO | 15E | 6025.0 - 6985.0 | 0.025 |
| Power Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.32 W/kg and 0.64 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 17mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/14/2023 Application Dated: 03/13/2023 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 1TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.787 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.601 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna,Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Q0duW/+mPI2djM0VncavWw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 03/14/2023 Application Dated: 03/13/2023 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 1TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.787 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.601 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna,Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 08/22/2024 Application Dated: 08/22/2024 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Rugged Handheld Tablet |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Model: DT362DN), changed the antenna into a portable device, contained granted module FCC ID: YE3600-AX210D2 and performed Radiated Spurious Emissions, Conducted Emissions at AC power line and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 0.17W/kg and 1.41W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application KB87zj3xtlBaA8sNpALRhA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 08/22/2024 Application Dated: 08/22/2024 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Rugged Handheld Tablet |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Model: DT362DN), changed the antenna into a portable device, contained granted module FCC ID: YE3600-AX210D2 and performed Radiated Spurious Emissions, Conducted Emissions at AC power line and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 0.17W/kg and 1.41W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/14/2023 Application Dated: 03/13/2023 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 1TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application Ig4ADI8RYSHhG8YvqvbnTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 03/14/2023 Application Dated: 03/13/2023 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 1TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/14/2023 Application Dated: 03/13/2023 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 1TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application e9DAWB3Z70thZdDTB1uVFw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 03/14/2023 Application Dated: 03/13/2023 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 1TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 06/06/2023 Application Dated: 06/06/2023 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Rugged Tablet |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5240.0 | 0.219 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.162 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.243 | ||
| CC MO ND | 15E | 5745.0 - 5825.0 | 0.248 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host (Rugged Tablet, DT361xxxx(x=0-9, A-Z, or null, or ., or /), DT361DM), change the antenna and perform Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.47W/kg and 1.55W/kg respectively. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Da6R13+pztpo/S94s4tIkQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 06/06/2023 Application Dated: 06/06/2023 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Rugged Tablet |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5240.0 | 0.219 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.162 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.243 | ||
| CC MO ND | 15E | 5745.0 - 5825.0 | 0.248 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host (Rugged Tablet, DT361xxxx(x=0-9, A-Z, or null, or ., or /), DT361DM), change the antenna and perform Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.47W/kg and 1.55W/kg respectively. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 06/06/2023 Application Dated: 06/06/2023 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Rugged Tablet |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.787 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.601 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host (Rugged Tablet, DT361xxxx(x=0-9, A-Z, or null, or ., or /), DT361DM), change the antenna and perform Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.55W/kg respectively. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application a3/rpPI/hPfoHYR4cYSN6g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 06/06/2023 Application Dated: 06/06/2023 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Rugged Tablet |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.787 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.601 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host (Rugged Tablet, DT361xxxx(x=0-9, A-Z, or null, or ., or /), DT361DM), change the antenna and perform Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.55W/kg respectively. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 08/22/2024 Application Dated: 08/22/2024 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Rugged Handheld Tablet |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.787 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.601 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Model: DT362DN), changed the antenna into a portable device, contained granted module FCC ID: YE3600-AX210D2 and performed Radiated Spurious Emissions, Conducted Emissions at AC power line and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 1.29W/kg and 1.41W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 9mb5rr95gZrUiDyhjnjufQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 08/22/2024 Application Dated: 08/22/2024 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Rugged Handheld Tablet |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.787 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.601 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Model: DT362DN), changed the antenna into a portable device, contained granted module FCC ID: YE3600-AX210D2 and performed Radiated Spurious Emissions, Conducted Emissions at AC power line and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 1.29W/kg and 1.41W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/14/2023 Application Dated: 03/13/2023 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 1TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5240.0 | 0.219 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.162 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.243 | ||
| CC MO ND | 15E | 5745.0 - 5825.0 | 0.248 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 5seH7tEr0p3U8d+2Wkbi+A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 03/14/2023 Application Dated: 03/13/2023 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 1TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5240.0 | 0.219 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.162 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.243 | ||
| CC MO ND | 15E | 5745.0 - 5825.0 | 0.248 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 08/22/2024 Application Dated: 08/22/2024 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Rugged Handheld Tablet |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5240.0 | 0.219 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.162 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.243 | ||
| CC MO ND | 15E | 5745.0 - 5825.0 | 0.248 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Model: DT362DN), changed the antenna into a portable device, contained granted module FCC ID: YE3600-AX210D2 and performed Radiated Spurious Emissions, Conducted Emissions at AC power line and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 1.40W/kg and 1.41W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 57oNwBM03X5yKL+ZZi86Jg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 08/22/2024 Application Dated: 08/22/2024 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600-AX210D2 |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Rugged Handheld Tablet |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5240.0 | 0.219 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.162 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.243 | ||
| CC MO ND | 15E | 5745.0 - 5825.0 | 0.248 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Model: DT362DN), changed the antenna into a portable device, contained granted module FCC ID: YE3600-AX210D2 and performed Radiated Spurious Emissions, Conducted Emissions at AC power line and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 1.40W/kg and 1.41W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |