1. FCC ID
  2. YE3
  3. YE3600-SC200ENA

FCC ID YE3600-SC200ENA

Multi-mode Smart LTE Module

by DT Research, Inc.

Grantee Code: YE3   Product Code: 600SC200ENA
Latest application date: 2025-09-11

FCC ID Device Details

FCC IDYE3600-SC200ENA
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYE3
Product Code600SC200ENA
Applicant BusinessDT Research, Inc. 🇹🇼
Related Domains dtri.com
Equipment ClassMulti-mode Smart LTE Module
Test FirmSGS-CSTC Standards Technical Services Co., Ltd. Sh

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-09-11
5745-5825 MHzClass II permissive change or modification of presently authorized equipment2025-09-11
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2025-09-11
2510-2560 MHzClass II permissive change or modification of presently authorized equipment2025-09-11
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: XMR2022SC200ENA Grant Date: 07/05/20222025-08-28
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: XMR2022SC200ENA Grant Date: 07/05/20222025-08-28
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: XMR2022SC200ENA Grant Date: 07/05/20222025-08-28
670.5-690.5 MHzChange in identification of presently authorized equipment. Original FCC ID: XMR2022SC200ENA Grant Date: 07/05/20222025-08-20

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2026-03-10PDF 572.7 KB
External PhotosExternal Photos2026-03-10PDF 387.2 KB
External PhotoExternal Photos2025-08-28PDF 417.9 KB
External PhotosExternal Photos2025-08-20PDF 417.9 KB
LabelID Label/Location Info2025-08-28PDF 220.2 KB
Setup PhotosTest Setup Photos2026-03-10PDF 486.5 KB
SZCR250700317404 BTTest Report2025-09-11PDF 1.4 MB
SZCR250700317405 BLETest Report2025-09-11PDF 1.3 MB
SZCR250700317406 2.4G WIFITest Report2025-09-11PDF 2 MB
SZCR250700317407 5G WIFITest Report2025-09-11PDF 4.5 MB
WiFi Antenna SpecificationTest Report2025-09-11PDF 3.4 MB
Agent LetterAttestation Statements2025-09-11PDF 540.1 KB
Applicant_Declaration_LetterAttestation Statements2025-09-11PDF 279.3 KB
Coverlist AttestationAttestation Statements2025-09-11PDF 374.5 KB
CoverList AttestationAttestation Statements2025-08-28PDF 331.2 KB
Declaration LetterAttestation Statements2025-08-28PDF 229.8 KB
US Agent for Service of ProcessAttestation Statements2025-08-28PDF 496.1 KB
Agent LetterAttestation Statements2025-08-20PDF 496.1 KB
Applicant_Declaration_LetterAttestation Statements2025-08-20PDF 229.8 KB
Coverlist AttestationAttestation Statements2025-08-20PDF 331.2 KB
Authorization LetterCover Letter(s)2025-09-11PDF 803 KB
Confidentiality LetterCover Letter(s)2025-09-11PDF 450.2 KB
PCII change request letterCover Letter(s)2025-09-11PDF 26.7 KB
FCC Authority letterCover Letter(s)2025-08-28PDF 761.7 KB
FCC change ID request letterCover Letter(s)2025-08-28PDF 66.1 KB
Authorization LetterCover Letter(s)2025-08-20PDF 761.7 KB
Authorization from original applicantCover Letter(s)2025-08-20PDF 66.1 KB
Change ID request letterCover Letter(s)2025-08-20PDF 25.2 KB
SZCR250700317408 MPERF Exposure Info2025-09-11PDF 775 KB

Application Information

Application IDVQx74sBR8X9iK3fe0FDQvg==
Final Action Date2025-09-11
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019830793
Model600-SC200ENA
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionMulti-mode Smart LTE Module
Responsible PartyJS Hsu, js_hsu@dtri.com , 886-2-2298-1039
Technical ContactKeny Xu, SGS-CSTC Standards Technical Services Co., Ltd., keny.xu@sgs.com , 86-755-25328629
Test FirmKeny Xu, SGS-CSTC Standards Technical Services Co., Ltd. Sh, Keny.Xu@sgs.com , 86-(0)755-2532-8629
TCB EmailUSCTS.TCB@SGS.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Long-Term ConfidentialityYes
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
VQx74sBR8X9iK3fe0FDQvg==2025-09-11Class II permissive change or modification of presently authorized equipment
RBikgF0ZEMowGuCE2Bw4Ow==2025-09-11Class II permissive change or modification of presently authorized equipment
LRyeKFkaDcH6e/YbSHSHxg==2025-09-11Class II permissive change or modification of presently authorized equipment
0zI89Mn8xmScUQL8qQfzBg==2025-09-11Class II permissive change or modification of presently authorized equipment
u4z9a2gIiL8WtZ/LLNeihw==2025-08-28Change in identification of presently authorized equipment. Original FCC ID: XMR2022SC200ENA Grant Date: 07/05/2022
arIFOV5HcpQ9IrpHAHiIfw==2025-08-28Change in identification of presently authorized equipment. Original FCC ID: XMR2022SC200ENA Grant Date: 07/05/2022
Ys6zOFpQbNvLz++RMeupww==2025-08-28Change in identification of presently authorized equipment. Original FCC ID: XMR2022SC200ENA Grant Date: 07/05/2022
ypJCT8pEs2NcR8/eeiq3Sw==2025-08-20Change in identification of presently authorized equipment. Original FCC ID: XMR2022SC200ENA Grant Date: 07/05/2022

Equipment Authorization

FrequencyOutputToleranceGrant Notes
670.5-690.5 MHz0.2240.1ppm
670.5-690.5 MHz0.1850.1ppm
673-688 MHz0.1980.1ppm
673-688 MHz0.1680.1ppm
704-711 MHz0.220.1ppm
704-711 MHz0.1830.1ppm
709-711 MHz0.2190.1ppm
709-711 MHz0.1850.1ppm
782 MHz0.210.1ppm
782 MHz0.20.1ppm
793 MHz0.2240.1ppm
793 MHz0.1870.1ppm
819 MHz0.2180.1ppm
819 MHz0.190.1ppm
829-844 MHz0.2290.1ppm
829-844 MHz0.1950.1ppm
831.5-841.5 MHz0.2350.1ppm
831.5-841.5 MHz0.2040.1ppm
1711.5-1753.5 MHz0.1880.1ppm
1715-1750 MHz0.2360.1ppm
1717.5-1772.5 MHz0.2110.1ppm
1720-1770 MHz0.2150.1ppm
1720-1770 MHz0.1790.1ppm
1720-1745 MHz0.2140.1ppm
1720-1745 MHz0.1790.1ppm
1852.5-1912.5 MHz0.2430.1ppm
1860-1905 MHz0.2120.1ppm
1860-1905 MHz0.1870.1ppm
2402-2480 MHz0.0100000CC
2402-2480 MHz0.001CC
2412-2462 MHz0.218CC
2498.5-2687.5 MHz0.2070.1ppm
2501-2685 MHz0.1820.1ppm
2505-2565 MHz0.2080.1ppm
2506-2680 MHz0.2010.1ppm
2506-2680 MHz0.1660.1ppm
2510-2560 MHz0.2070.1ppm
2510-2560 MHz0.180.1ppm
5180-5240 MHz0.036CC
5260-5320 MHz0.039CC
5500-5700 MHz0.042CC
5745-5825 MHz0.043CC

Grants

TCB Grant - Application Ys6zOFpQbNvLz++RMeupww==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/28/2025

Application Dated: 08/28/2025
DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
 
Attention: JS Hsu ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3600-SC200ENA
Name of Grantee:  DT Research, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.036  
CC 15E 5260.0  -  5320.0 0.039  
CC 15E 5500.0  -  5700.0 0.042  
CC 15E 5745.0  -  5825.0 0.043  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ypJCT8pEs2NcR8/eeiq3Sw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/20/2025

Application Dated: 08/20/2025
DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
 
Attention: JS Hsu ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3600-SC200ENA
Name of Grantee:  DT Research, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1860.0  -  1900.0 0.211 0.1  PM 17M9G7D
24E 1860.0  -  1900.0 0.179 0.1  PM 17M9W7D
24E 1855.0  -  1905.0 0.181 0.1  PM 8M90W7D
27 1720.0  -  1745.0 0.214 0.1  PM 17M9G7D
27 1720.0  -  1745.0 0.179 0.1  PM 17M9W7D
27 1715.0  -  1750.0 0.236 0.1  PM 8M93G7D
27 1711.5  -  1753.5 0.188 0.1  PM 2M69W7D
22H 829.0  -  844.0 0.229 0.1  PM 8M93G7D
22H 829.0  -  844.0 0.195 0.1  PM 8M91W7D
27 2510.0  -  2560.0 0.207 0.1  PM 17M9G7D
27 2510.0  -  2560.0 0.18 0.1  PM 17M9W7D
27 2505.0  -  2565.0 0.208 0.1  PM 8M93G7D
27 704.0  -  711.0 0.22 0.1  PM 8M94G7D
27 704.0  -  711.0 0.183 0.1  PM 8M92G7D
27 782.0  -  782.0 0.21 0.1  PM 8M90G7D
27 782.0  -  782.0 0.2 0.1  PM 8M88W7D
90 793.0  -  793.0 0.224 0.1  PM 8M93G7D
90 793.0  -  793.0 0.187 0.1  PM 8M92W7D
27 709.0  -  711.0 0.219 0.1  PM 8M93G7D
27 709.0  -  711.0 0.185 0.1  PM 8M91W7D
24E 1860.0  -  1905.0 0.212 0.1  PM 17M9G7D
24E 1860.0  -  1905.0 0.187 0.1  PM 17M9W7D
24E 1852.5  -  1912.5 0.243 0.1  PM 4M47G7D
90 819.0  -  819.0 0.218 0.1  PM 8M93G7D
90 819.0  -  819.0 0.19 0.1  PM 8M91W7D
22H 831.5  -  841.5 0.235 0.1  PM 13M5G7D
22H 831.5  -  841.5 0.204 0.1  PM 13M5W7D
27 2506.0  -  2680.0 0.201 0.1  PM 17M9G7D
27 2506.0  -  2680.0 0.166 0.1  PM 17M9W7D
27 2498.5  -  2687.5 0.207 0.1  PM 4M47G7D
27 2501.0  -  2685.0 0.182 0.1  PM 8M93W7D
27 1720.0  -  1770.0 0.215 0.1  PM 17M9G7D
27 1720.0  -  1770.0 0.179 0.1  PM 17M9W7D
27 1717.5  -  1772.5 0.211 0.1  PM 13M4W7D
27 673.0  -  688.0 0.198 0.1  PM 17M8G7D
27 673.0  -  688.0 0.168 0.1  PM 17M8W7D
27 670.5  -  690.5 0.224 0.1  PM 13M5G7D
27 670.5  -  690.5 0.185 0.1  PM 13M5W7D

Output power listed is conducted. Single Modular Approval for mobile or fixed RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 7 and 71; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5,12 and 26; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14 and 17; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26; and LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Band 41. This device also supports LTE uplink intra-band carrier aggregation as described in this filing. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

TCB Grant - Application VQx74sBR8X9iK3fe0FDQvg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 09/11/2025

Application Dated: 09/11/2025
DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
 
Attention: JS Hsu ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3600-SC200ENA
Name of Grantee:  DT Research, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Permissive change as specified under 47 CFR 2.1043 of the FCC rules to the single module, changed the antenna and the RF power of the module will be reduced by software at the time of production and cannot be adjusted by the end user. Considering these changes, retests were performed on Conducted Emissions at AC Power Line (150kHz-30MHz) and Radiated Spurious Emissions. All test results are demonstrated to compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application u4z9a2gIiL8WtZ/LLNeihw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/28/2025

Application Dated: 08/28/2025
DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
 
Attention: JS Hsu ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3600-SC200ENA
Name of Grantee:  DT Research, Inc.
Equipment Class: Digital Transmission System
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.001  
CC 15C 2412.0  -  2462.0 0.218  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application RBikgF0ZEMowGuCE2Bw4Ow==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 09/11/2025

Application Dated: 09/11/2025
DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
 
Attention: JS Hsu ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3600-SC200ENA
Name of Grantee:  DT Research, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.036  
CC 15E 5260.0  -  5320.0 0.039  
CC 15E 5500.0  -  5700.0 0.042  
CC 15E 5745.0  -  5825.0 0.043  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz modes.

Permissive change as specified under 47 CFR 2.1043 of the FCC rules to the single module, changed the antenna and the RF power of the module will be reduced by software at the time of production and cannot be adjusted by the end user. Considering these changes, retests were performed on Conducted Emissions at AC Power Line (150kHz-30MHz) , DFS and Radiated Spurious Emissions. All test results are demonstrated to compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application LRyeKFkaDcH6e/YbSHSHxg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 09/11/2025

Application Dated: 09/11/2025
DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
 
Attention: JS Hsu ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3600-SC200ENA
Name of Grantee:  DT Research, Inc.
Equipment Class: Digital Transmission System
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.001  
CC 15C 2412.0  -  2462.0 0.218  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz bandwidth modes.

Permissive change as specified under 47 CFR 2.1043 of the FCC rules to the single module, changed the antenna and the RF power of the module will be reduced by software at the time of production and cannot be adjusted by the end user. Considering these changes, retests were performed on Conducted Emissions at AC Power Line (150kHz-30MHz) and Radiated Spurious Emissions. All test results are demonstrated to compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application arIFOV5HcpQ9IrpHAHiIfw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/28/2025

Application Dated: 08/28/2025
DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
 
Attention: JS Hsu ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3600-SC200ENA
Name of Grantee:  DT Research, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0zI89Mn8xmScUQL8qQfzBg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 09/11/2025

Application Dated: 09/11/2025
DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
 
Attention: JS Hsu ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3600-SC200ENA
Name of Grantee:  DT Research, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1860.0  -  1900.0 0.211 0.1  PM 17M9G7D
24E 1860.0  -  1900.0 0.179 0.1  PM 17M9W7D
24E 1855.0  -  1905.0 0.181 0.1  PM 8M90W7D
27 1720.0  -  1745.0 0.214 0.1  PM 17M9G7D
27 1720.0  -  1745.0 0.179 0.1  PM 17M9W7D
27 1715.0  -  1750.0 0.236 0.1  PM 8M93G7D
27 1711.5  -  1753.5 0.188 0.1  PM 2M69W7D
22H 829.0  -  844.0 0.229 0.1  PM 8M93G7D
22H 829.0  -  844.0 0.195 0.1  PM 8M91W7D
27 2510.0  -  2560.0 0.207 0.1  PM 17M9G7D
27 2510.0  -  2560.0 0.18 0.1  PM 17M9W7D
27 2505.0  -  2565.0 0.208 0.1  PM 8M93G7D
27 704.0  -  711.0 0.22 0.1  PM 8M94G7D
27 704.0  -  711.0 0.183 0.1  PM 8M92G7D
27 782.0  -  782.0 0.21 0.1  PM 8M90G7D
27 782.0  -  782.0 0.2 0.1  PM 8M88W7D
90 793.0  -  793.0 0.224 0.1  PM 8M93G7D
90 793.0  -  793.0 0.187 0.1  PM 8M92W7D
27 709.0  -  711.0 0.219 0.1  PM 8M93G7D
27 709.0  -  711.0 0.185 0.1  PM 8M91W7D
24E 1860.0  -  1905.0 0.212 0.1  PM 17M9G7D
24E 1860.0  -  1905.0 0.187 0.1  PM 17M9W7D
24E 1852.5  -  1912.5 0.243 0.1  PM 4M47G7D
90 819.0  -  819.0 0.218 0.1  PM 8M93G7D
90 819.0  -  819.0 0.19 0.1  PM 8M91W7D
22H 831.5  -  841.5 0.235 0.1  PM 13M5G7D
22H 831.5  -  841.5 0.204 0.1  PM 13M5W7D
27 2506.0  -  2680.0 0.201 0.1  PM 17M9G7D
27 2506.0  -  2680.0 0.166 0.1  PM 17M9W7D
27 2498.5  -  2687.5 0.207 0.1  PM 4M47G7D
27 2501.0  -  2685.0 0.182 0.1  PM 8M93W7D
27 1720.0  -  1770.0 0.215 0.1  PM 17M9G7D
27 1720.0  -  1770.0 0.179 0.1  PM 17M9W7D
27 1717.5  -  1772.5 0.211 0.1  PM 13M4W7D
27 673.0  -  688.0 0.198 0.1  PM 17M8G7D
27 673.0  -  688.0 0.168 0.1  PM 17M8W7D
27 670.5  -  690.5 0.224 0.1  PM 13M5G7D
27 670.5  -  690.5 0.185 0.1  PM 13M5W7D

Output power listed is conducted. Single Modular Approval for mobile or fixed RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 7 and 71; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5,12 and 26; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14 and 17; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26; and LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Band 41. This device also supports LTE uplink intra-band carrier aggregation as described in this filing. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

Permissive change as specified under 47 CFR 2.1043 of the FCC rules to the single module, changed the antenna and the RF power of the module will be reduced by software at the time of production and cannot be adjusted by the end user.