FCC ID YE3600D
Rugged Tablet
by DT Research, Inc.
Grantee Code: YE3 Product Code: 600D
Latest application date: 2021-08-31
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-31 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-31 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-31 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-01-06 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-01-06 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-01-06 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-12-31 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-12-31 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-12-31 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-12-23 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-12-23 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-12-23 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-12 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-12 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-05-24 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-05-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-05-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-04-25 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-04-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-04-25 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2018-05-09 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-05-09 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-05-09 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD98265NG Grant Date: 06/03/2016 | 2017-08-04 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD98265NG Grant Date: 06/03/2016 | 2017-08-04 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD98265NG Grant Date: 06/03/2016 | 2017-08-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2021-08-31 | PDF 430.7 KB |
| User Manual | Users Manual | 2020-02-20 | PDF 1.7 MB |
| User Manual | Users Manual | 2020-02-14 | PDF 685.4 KB |
| User Manual | Users Manual | 2020-02-06 | PDF 771.6 KB |
| User Manual | Users Manual | 2019-11-12 | PDF 1.1 MB |
| User Manual | Users Manual | 2019-11-05 | PDF 1.1 MB |
| User Manual | Users Manual | 2019-07-08 | PDF 1.8 MB |
| Host User Manual | Users Manual | 2019-06-09 | PDF 1.3 MB |
| Interanal photo | Internal Photos | 2021-08-31 | PDF 2.8 MB |
| internal photo | Internal Photos | 2021-08-31 | PDF 2.8 MB |
| Internal Photos | Internal Photos | 2020-02-20 | PDF 1,021.1 KB |
| Internal Photos | Internal Photos | 2020-02-14 | PDF 4.6 MB |
| Internal Photos | Internal Photos | 2020-02-06 | PDF 3.7 MB |
| Internal Photos | Internal Photos | 2019-11-12 | PDF 3 MB |
| Internal photo | Internal Photos | 2019-11-12 | PDF 3 MB |
| Internal Photos | Internal Photos | 2019-11-05 | PDF 5.6 MB |
| Internal photo | Internal Photos | 2019-11-05 | PDF 1.4 MB |
| Internal Photos | Internal Photos | 2019-11-04 | PDF 1.4 MB |
| Internal photo | Internal Photos | 2019-11-04 | PDF 5.6 MB |
| Internal Photos | Internal Photos | 2019-07-08 | PDF 805.3 KB |
| Host Internal Photos | Internal Photos | 2019-06-09 | PDF 879 KB |
| External photo | External Photos | 2021-08-31 | PDF 1 MB |
| external photo | External Photos | 2021-08-31 | PDF 1 MB |
| External Photos | External Photos | 2020-02-20 | PDF 1.1 MB |
| External Photos | External Photos | 2020-02-14 | PDF 1.7 MB |
| External Photos | External Photos | 2020-02-06 | PDF 1.6 MB |
| External Photo | External Photos | 2019-11-12 | PDF 1.4 MB |
| External Photo | External Photos | 2019-11-05 | PDF 2.6 MB |
| External Photos | External Photos | 2019-11-05 | PDF 2.6 MB |
| External Photos | External Photos | 2019-07-08 | PDF 505.7 KB |
| Host External Photos | External Photos | 2019-06-09 | PDF 496.3 KB |
| Label | ID Label/Location Info | 2021-08-31 | PDF 303.4 KB |
| Label and Label Location | ID Label/Location Info | 2020-01-06 | PDF 296.5 KB |
| Label and Label Location | ID Label/Location Info | 2019-12-31 | PDF 751.4 KB |
| Label and Label Location | ID Label/Location Info | 2019-12-23 | PDF 381.8 KB |
| Label | ID Label/Location Info | 2019-11-12 | PDF 1.1 MB |
| Label | ID Label/Location Info | 2019-11-05 | PDF 197.1 KB |
| Label and Label Location | ID Label/Location Info | 2019-05-24 | PDF 447.9 KB |
| Block Diagram | Block Diagram | 2019-11-12 | PDF 557.1 KB |
| Test Setup Photo | Test Setup Photos | 2021-08-31 | PDF 418.3 KB |
| Test Setup Photos | RF Exposure Info | 2021-08-31 | PDF 254.1 KB |
| test setup photo | Test Setup Photos | 2021-08-31 | PDF 518.1 KB |
| test setup photo | RF Exposure Info | 2021-08-31 | PDF 254.1 KB |
| test setup photo | Test Setup Photos | 2021-08-31 | PDF 623.8 KB |
| SAR Setup Photos | Test Setup Photos | 2020-02-20 | PDF 957.8 KB |
| SAR Test Setup Photos | Test Setup Photos | 2020-02-20 | PDF 957.8 KB |
| SAR Setup Photos | Test Setup Photos | 2020-02-14 | PDF 1.1 MB |
| SAR Setup Photos | Test Setup Photos | 2020-02-06 | PDF 1.5 MB |
| SAR Test Setup Photos | Test Setup Photos | 2020-02-06 | PDF 1.5 MB |
| Test Setup Photos | Test Setup Photos | 2019-11-12 | PDF 604.4 KB |
| Test Setup Photo | Test Setup Photos | 2019-11-05 | PDF 745.8 KB |
| SAR Setup Photos | Test Setup Photos | 2019-07-08 | PDF 1 MB |
| SAR Test Setup Photos | Test Setup Photos | 2019-07-08 | PDF 1 MB |
| SAR Setup Photos | Test Setup Photos | 2019-06-09 | PDF 1.1 MB |
| SAR Test Report | RF Exposure Info | 2021-08-31 | PDF 1.8 MB |
| Test Report | Test Report | 2021-08-31 | PDF 6 MB |
| Test Report | Test Report | 2021-08-31 | PDF 1.4 MB |
| Test Report | Test Report | 2021-08-31 | PDF 2.8 MB |
| Test Report | Test Report | 2021-08-31 | PDF 3 MB |
| SAR Test Report | RF Exposure Info | 2019-11-12 | PDF 5.5 MB |
| Test Report | Test Report | 2019-11-12 | PDF 986.3 KB |
| SAR Test Report | RF Exposure Info | 2019-11-05 | PDF 5.9 MB |
| SAR test report | RF Exposure Info | 2019-11-05 | PDF 1.3 MB |
| Test Report | Test Report | 2019-11-05 | PDF 880.2 KB |
| SAR Test Report | RF Exposure Info | 2019-11-04 | PDF 1.7 MB |
| SAR test report | RF Exposure Info | 2019-11-04 | PDF 1.7 MB |
| SAR test report | RF Exposure Info | 2019-11-04 | PDF 5.9 MB |
| SAR Test Report | RF Exposure Info | 2019-05-24 | PDF 1 MB |
| PCII Change Request Letter | Attestation Statements | 2021-08-31 | PDF 23.3 KB |
| Authorization Letter | Cover Letter(s) | 2021-08-31 | PDF 52.8 KB |
| Channel Statement | Cover Letter(s) | 2021-08-31 | PDF 66.7 KB |
| Confidentiality Letter | Cover Letter(s) | 2021-08-31 | PDF 158.6 KB |
| Declaration Letter | Cover Letter(s) | 2021-08-31 | PDF 128.7 KB |
| PCII Change Request Letter | Cover Letter(s) | 2021-08-31 | PDF 23.3 KB |
| Authorization letter | Cover Letter(s) | 2020-01-06 | PDF 39.5 KB |
| CIIPC Letter | Cover Letter(s) | 2020-01-06 | PDF 61.1 KB |
| Confidential Authorization | Cover Letter(s) | 2020-01-06 | PDF 45.3 KB |
| Authorization letter | Cover Letter(s) | 2019-12-31 | PDF 40.8 KB |
| CIIPC Letter | Cover Letter(s) | 2019-12-31 | PDF 200.1 KB |
| CIIPC Letter | Cover Letter(s) | 2019-12-31 | PDF 63 KB |
| Confidential Authorization | Cover Letter(s) | 2019-12-31 | PDF 45.5 KB |
| Authorization letter | Cover Letter(s) | 2019-12-23 | PDF 39.9 KB |
| CIIPC Letter | Cover Letter(s) | 2019-12-23 | PDF 64.8 KB |
| Confidential Authorization | Cover Letter(s) | 2019-12-23 | PDF 45.8 KB |
| Confidentiality Letter | Cover Letter(s) | 2019-11-12 | PDF 1,008.4 KB |
| Cover Letter | Cover Letter(s) | 2019-11-12 | PDF 64 KB |
| POA | Cover Letter(s) | 2019-11-12 | PDF 563 KB |
| cover letter | Cover Letter(s) | 2019-11-12 | PDF 64 KB |
| Confidentiality Letter | Cover Letter(s) | 2019-11-05 | PDF 240 KB |
| Confidentiality letter | Cover Letter(s) | 2019-11-05 | PDF 240 KB |
| Cover Letter | Cover Letter(s) | 2019-11-05 | PDF 347.7 KB |
| POA | Cover Letter(s) | 2019-11-05 | PDF 194.6 KB |
| Cover letter | Cover Letter(s) | 2019-11-04 | PDF 347.7 KB |
| Authorization Letter | Cover Letter(s) | 2019-05-24 | PDF 193.8 KB |
| C2PC Letter | Cover Letter(s) | 2019-05-24 | PDF 174.8 KB |
| Confidential Letter | Cover Letter(s) | 2019-05-24 | PDF 223.4 KB |
| Declaration of Similarity | Cover Letter(s) | 2019-05-24 | PDF 17.7 KB |
| SAR Calibration Certificate | RF Exposure Info | 2021-08-31 | PDF 3.2 MB |
| SAR Calibration Certificates | RF Exposure Info | 2020-01-06 | PDF 3.8 MB |
| SAR Plots | RF Exposure Info | 2020-01-06 | PDF 912.4 KB |
| SAR Report | RF Exposure Info | 2020-01-06 | PDF 1,004.5 KB |
| SAR Plots | RF Exposure Info | 2019-12-31 | PDF 787 KB |
| SAR Report | RF Exposure Info | 2019-12-31 | PDF 991.4 KB |
| SAR Calibration Certificates | RF Exposure Info | 2019-12-23 | PDF 5 MB |
| SAR Plots | RF Exposure Info | 2019-12-23 | PDF 924.2 KB |
| SAR Report | RF Exposure Info | 2019-12-23 | PDF 1 MB |
| SAR Probe & Dipole Cal Cert | RF Exposure Info | 2019-05-24 | PDF 3.5 MB |
| SAR Scan Plots | RF Exposure Info | 2019-05-24 | PDF 710.6 KB |
Application Information
| Application ID | y8pz7HOQCi2+Sh89MC1tLA== |
|---|---|
| Final Action Date | 2021-08-31 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019830793 |
| Model | 600D |
| Equipment Class | JBP - Part 15 Class B Computing Device Peripheral |
| Device Description | Rugged Tablet |
| Responsible Party | JS Hsu, js_hsu@dtri.com  , 886-2-2298-1039 |
| Technical Contact | Kobe Jian, SGS-CSTC Standards Technical Services Co., Ltd., Kobe.Jian@sgs.com  , 86 20 82155314 |
| Non-Technical Contact | Keny Xu, SGS-CSTC Standards Technical Services Co., Ltd., keny.xu@sgs.com , 86-755-25328629 |
| Test Firm | Kobe Jian, SGS-CSTC Standards Technical Services Co., Ltd., kobe.jian@sgs.com , 86-0-20-82155314 |
| TCB Email | USCTS.TCB@SGS.COM |
| TCB Scope | A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval. Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: DT382GL. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| y8pz7HOQCi2+Sh89MC1tLA== | 2021-08-31 | Class II permissive change or modification of presently authorized equipment |
| sgOdo5hzS6D/55E+mMDsUA== | 2021-08-31 | Class II permissive change or modification of presently authorized equipment |
| Ooz3Min30XocPlWnbum5UA== | 2021-08-31 | Class II permissive change or modification of presently authorized equipment |
| Bv7Go1ljDOr2nkzPA2q5qg== | 2021-08-31 | Class II permissive change or modification of presently authorized equipment |
| rHniN/qYn4ZmgfDXU3IFTQ== | 2020-01-06 | Class II permissive change or modification of presently authorized equipment |
| o+UGKLQWGe3p994EswuDvw== | 2020-01-06 | Class II permissive change or modification of presently authorized equipment |
| mCgYt472Mc5Abj3Mw5V89A== | 2020-01-06 | Class II permissive change or modification of presently authorized equipment |
| erRyN/RTPAZU/AEjNxKE5A== | 2019-12-31 | Class II permissive change or modification of presently authorized equipment |
| IDUjye29o616usucYD8vtg== | 2019-12-31 | Class II permissive change or modification of presently authorized equipment |
| 38S4SgwSE5a9/Z2o4ZgB/g== | 2019-12-31 | Class II permissive change or modification of presently authorized equipment |
| jngVLaCGRarUuyZ+w4FL0w== | 2019-12-23 | Class II permissive change or modification of presently authorized equipment |
| hkEeyDN0X4UAczVdI3CYwA== | 2019-12-23 | Class II permissive change or modification of presently authorized equipment |
| OJj6fC0MKhbrOZZtO1MaCw== | 2019-12-23 | Class II permissive change or modification of presently authorized equipment |
| v6Qp4oW5apPPLh4MIbCejA== | 2019-11-12 | Class II permissive change or modification of presently authorized equipment |
| GtCBxyW8LdAPIZmPiDguMg== | 2019-11-12 | Class II permissive change or modification of presently authorized equipment |
| CQ7/x+sQol+6y2oC1PCF7Q== | 2019-11-12 | Class II permissive change or modification of presently authorized equipment |
| 7jpSqb0H5QPcKArdBotIIA== | 2019-11-12 | Class II permissive change or modification of presently authorized equipment |
| ch/cOuzWXNQJ28VoBDRxVQ== | 2019-11-05 | Class II permissive change or modification of presently authorized equipment |
| M7I/27ZeVMPEhq/DEOx/YQ== | 2019-11-05 | Class II permissive change or modification of presently authorized equipment |
| LiL6d9B/5yoifN/oGx/5wg== | 2019-11-04 | Class II permissive change or modification of presently authorized equipment |
| 0jjdoC4+/ffqsYy6cmt47w== | 2019-11-04 | Class II permissive change or modification of presently authorized equipment |
| U25T4AbG4aFpsjkzKLD5Xw== | 2019-05-24 | Class II permissive change or modification of presently authorized equipment |
| OvgYHWrigZM2TDJ9ASxVng== | 2019-05-24 | Class II permissive change or modification of presently authorized equipment |
| HNtDCTvFLUNb//hLu0VWUQ== | 2019-05-24 | Class II permissive change or modification of presently authorized equipment |
| wa/ftLk0kSqZUBL+5aa37w== | 2019-04-25 | Class II permissive change or modification of presently authorized equipment |
| kHkMWA2g/2SJYWHXaGapTw== | 2019-04-25 | Class II permissive change or modification of presently authorized equipment |
| DHKDYGD5OCZoRXZkYJy0Sg== | 2019-04-25 | Class II permissive change or modification of presently authorized equipment |
| m4dp0Xqsz8OR4hzK3rI91Q== | 2018-05-09 | Class II permissive change or modification of presently authorized equipment |
| ebfTyJfL/LtDuGxjuBaAwA== | 2018-05-09 | Class II permissive change or modification of presently authorized equipment |
| DweaRjpwYQDQ28iSv8ZCJQ== | 2018-05-09 | Class II permissive change or modification of presently authorized equipment |
| nv1JSfaYYMD73cZR8UxU8A== | 2017-08-04 | Change in identification of presently authorized equipment. Original FCC ID: PD98265NG Grant Date: 06/03/2016 |
| lxbLCNM00/uOqtlkE0/GQg== | 2017-08-04 | Change in identification of presently authorized equipment. Original FCC ID: PD98265NG Grant Date: 06/03/2016 |
| ig4R4jxRpbL8ccABJNUqpQ== | 2017-08-04 | Change in identification of presently authorized equipment. Original FCC ID: PD98265NG Grant Date: 06/03/2016 |
| QJDvoyKuESPFlFg0fLqG8w== | 2017-08-04 | Change in identification of presently authorized equipment. Original FCC ID: PD98265NG Grant Date: 06/03/2016 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.008 | 15C | CC |
| 2402-2480 MHz | 0.0160000 | 15C | CC |
| 2412-2472 MHz | 1 | 15C | CC, MO |
| 2422-2462 MHz | 0.494 | 15C | CC, MO |
| 5190-5230 MHz | 0.153 | 15E | CC, MO |
| 5190-5230 MHz | 0.153 | 15E | CC, MO, ND |
| 5190-5230 MHz | 0.153 | 15E | 38, CC, MO |
| 5210 MHz | 0.021 | 15E | CC, MO |
| 5210 MHz | 0.021 | 15E | CC, MO, ND |
| 5210 MHz | 0.021 | 15E | 38, CC, MO |
| 5260-5320 MHz | 0.159 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.159 | 15E | 38, CC, MO, ND |
| 5260-5320 MHz | 0.159 | 15E | CC, MO |
| 5270-5310 MHz | 0.166 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.166 | 15E | 38, CC, MO, ND |
| 5270-5310 MHz | 0.166 | 15E | CC, MO |
| 5290 MHz | 0.027 | 15E | CC, MO, ND |
| 5290 MHz | 0.027 | 15E | 38, CC, MO, ND |
| 5290 MHz | 0.027 | 15E | CC, MO |
| 5500-5700 MHz | 0.108 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.108 | 15E | 38, CC, MO, ND |
Grants
TCB Grant - Application y8pz7HOQCi2+Sh89MC1tLA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 08/31/2021 Application Dated: 08/31/2021 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Rugged Tablet |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| Limited Modular Approval. Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: DT382GL. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application y8pz7HOQCi2+Sh89MC1tLA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 08/31/2021 Application Dated: 08/31/2021 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Rugged Tablet |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| Limited Modular Approval. Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: DT382GL. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 04/25/2019 Application Dated: 04/25/2019 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 0.78 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT318CR) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.10 W/kg and 1.50 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application wa/ftLk0kSqZUBL+5aa37w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 04/25/2019 Application Dated: 04/25/2019 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 0.78 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT318CR) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.10 W/kg and 1.50 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 11/12/2019 Application Dated: 11/12/2019 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 1.0 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.494 |
| Output Power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 2.4GHz band operations and also has 20 MHz and 40 MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 0.91 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT380CR) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 1.17W/kg and 1.58 W/kg, respectively. Note: Device must operate with the power reduction mechanisms tested in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application v6Qp4oW5apPPLh4MIbCejA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 11/12/2019 Application Dated: 11/12/2019 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 1.0 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.494 |
| Output Power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 2.4GHz band operations and also has 20 MHz and 40 MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 0.91 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT380CR) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 1.17W/kg and 1.58 W/kg, respectively. Note: Device must operate with the power reduction mechanisms tested in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 05/24/2019 Application Dated: 05/24/2019 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: kiki Tang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 0.78 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT310CR, DT310XX) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.01 W/kg and 1.41 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application U25T4AbG4aFpsjkzKLD5Xw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 05/24/2019 Application Dated: 05/24/2019 |
| Attention: kiki Tang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 0.78 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT310CR, DT310XX) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.01 W/kg and 1.41 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 08/31/2021 Application Dated: 08/31/2021 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Rugged Tablet |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.159 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.166 | ||
| CC MO | 15E | 5290.0 - 5290.0 | 0.027 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.108 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.119 | ||
| CC MO | 15E | 5710.0 - 5710.0 | 0.215 | ||
| CC MO | 15E | 5720.0 - 5720.0 | 0.133 | ||
| CC MO | 15E | 5530.0 - 5690.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.092 |
| Output power listed is conducted. Limited Modular Approval. Device is an 802.11b/g/n device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 5 GHz band operationsas described in this filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body SAR and simultaneous transmission is 0.27W/kg, 0.27W/kg, respectively. This device supports 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: DT382GL. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application sgOdo5hzS6D/55E+mMDsUA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 08/31/2021 Application Dated: 08/31/2021 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Rugged Tablet |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.159 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.166 | ||
| CC MO | 15E | 5290.0 - 5290.0 | 0.027 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.108 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.119 | ||
| CC MO | 15E | 5710.0 - 5710.0 | 0.215 | ||
| CC MO | 15E | 5720.0 - 5720.0 | 0.133 | ||
| CC MO | 15E | 5530.0 - 5690.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.092 |
| Output power listed is conducted. Limited Modular Approval. Device is an 802.11b/g/n device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 5 GHz band operationsas described in this filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body SAR and simultaneous transmission is 0.27W/kg, 0.27W/kg, respectively. This device supports 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: DT382GL. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 01/06/2020 Application Dated: 01/06/2020 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.159 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.166 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.027 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.108 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.215 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.133 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.092 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.119 |
| Output Power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.44 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT370CR) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 1.39 W/kg and 1.08 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application rHniN/qYn4ZmgfDXU3IFTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 01/06/2020 Application Dated: 01/06/2020 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.159 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.166 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.027 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.108 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.215 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.133 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.092 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.119 |
| Output Power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.44 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT370CR) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 1.39 W/kg and 1.08 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/04/2017 Application Dated: 08/04/2017 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.159 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.166 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.027 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.108 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.119 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.215 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.133 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.107 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.092 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application QJDvoyKuESPFlFg0fLqG8w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 08/04/2017 Application Dated: 08/04/2017 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.159 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.166 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.027 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.108 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.119 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.215 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.133 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.107 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.092 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 05/24/2019 Application Dated: 05/24/2019 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: kiki Tang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.159 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.166 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.027 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.108 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.119 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.215 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.133 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.092 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.44 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT310CR, DT310XX) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 1.40 W/kg and 1.53 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application OvgYHWrigZM2TDJ9ASxVng==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 05/24/2019 Application Dated: 05/24/2019 |
| Attention: kiki Tang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.159 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.166 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.027 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.108 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.119 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.215 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.133 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.092 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.44 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT310CR, DT310XX) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 1.40 W/kg and 1.53 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 08/31/2021 Application Dated: 08/31/2021 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Rugged Tablet |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Output power listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body SAR values is: 0.09 W/kg. Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: DT382GL. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Ooz3Min30XocPlWnbum5UA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 08/31/2021 Application Dated: 08/31/2021 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Rugged Tablet |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Output power listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body SAR values is: 0.09 W/kg. Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: DT382GL. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 12/23/2019 Application Dated: 12/23/2019 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 1.0 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.494 |
| Output power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20 MHz, and 40 MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.46 W/kg and 0.91 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT311Y, Which contains a RFID module ,FCC ID:QV5MERCURY6E-M) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.67 W/kg and 1.52 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application OJj6fC0MKhbrOZZtO1MaCw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 12/23/2019 Application Dated: 12/23/2019 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 1.0 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.494 |
| Output power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20 MHz, and 40 MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.46 W/kg and 0.91 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT311Y, Which contains a RFID module ,FCC ID:QV5MERCURY6E-M) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.67 W/kg and 1.52 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 01/06/2020 Application Dated: 01/06/2020 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Output Power listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 0.78 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT370CR) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.09 W/kg and 1.08 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application o+UGKLQWGe3p994EswuDvw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 01/06/2020 Application Dated: 01/06/2020 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Output Power listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 0.78 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT370CR) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.09 W/kg and 1.08 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/04/2017 Application Dated: 08/04/2017 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 1.0 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.494 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.46W/kg and 0.91W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application nv1JSfaYYMD73cZR8UxU8A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 08/04/2017 Application Dated: 08/04/2017 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 1.0 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.494 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.46W/kg and 0.91W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 01/06/2020 Application Dated: 01/06/2020 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 1.0 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.494 |
| Output Power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20 MHz, and 40 MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.46 W/kg and 0.91 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT370CR) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.58 W/kg and 1.08 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application mCgYt472Mc5Abj3Mw5V89A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 01/06/2020 Application Dated: 01/06/2020 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 1.0 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.494 |
| Output Power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20 MHz, and 40 MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.46 W/kg and 0.91 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT370CR) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.58 W/kg and 1.08 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 11/05/2019 Application Dated: 11/04/2019 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application M7I/27ZeVMPEhq/DEOx/YQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 11/05/2019 Application Dated: 11/04/2019 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 05/09/2018 Application Dated: 05/09/2018 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.159 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.166 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.027 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.108 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.119 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.215 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.133 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.107 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.092 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.44 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT311T) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.53 W/kg and 0.39 W/kg, respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application m4dp0Xqsz8OR4hzK3rI91Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 05/09/2018 Application Dated: 05/09/2018 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.159 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.166 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.027 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.108 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.119 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.215 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.133 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.107 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.092 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.44 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT311T) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.53 W/kg and 0.39 W/kg, respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/04/2017 Application Dated: 08/04/2017 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application lxbLCNM00/uOqtlkE0/GQg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 08/04/2017 Application Dated: 08/04/2017 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 11/04/2019 Application Dated: 11/04/2019 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.78 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT313) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.35 W/kg and 0.43 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application LiL6d9B/5yoifN/oGx/5wg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 11/04/2019 Application Dated: 11/04/2019 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.78 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT313) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.35 W/kg and 0.43 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 04/25/2019 Application Dated: 04/25/2019 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.159 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.166 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.027 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.108 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.119 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.215 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.133 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.092 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.44 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT318CR) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 1.42 W/kg and 1.50 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application kHkMWA2g/2SJYWHXaGapTw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 04/25/2019 Application Dated: 04/25/2019 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.159 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.166 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.027 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.108 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.119 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.215 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.133 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.092 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.44 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT318CR) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 1.42 W/kg and 1.50 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 12/23/2019 Application Dated: 12/23/2019 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.159 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.166 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.027 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.108 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.119 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.215 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.133 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.092 |
| Output power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.44 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT311Y, Which contains a RFID module ,FCC ID:QV5MERCURY6E-M) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.39 W/kg and 1.52 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application jngVLaCGRarUuyZ+w4FL0w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 12/23/2019 Application Dated: 12/23/2019 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.161 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.153 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.021 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.159 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.166 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.027 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.108 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.119 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.215 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.133 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.227 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.092 |
| Output power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.44 W/kg, respectively. This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT311Y, Which contains a RFID module ,FCC ID:QV5MERCURY6E-M) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.39 W/kg and 1.52 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/04/2017 Application Dated: 08/04/2017 |
| DT Research, Inc. |
| 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT |
| NEW TAIPEI, Taiwan |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.78W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ig4R4jxRpbL8ccABJNUqpQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DT Research, Inc. 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT NEW TAIPEI, Taiwan |
Date of Grant: 08/04/2017 Application Dated: 08/04/2017 |
| Attention: JS Hsu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YE3600D |
| Name of Grantee: | DT Research, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 8265 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.78W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |