FCC ID YE3801I

Mobile Tablet

by DT Research, Inc.

Grantee Code: YE3   Product Code: 801I
Latest application date: 2018-11-15

FCC ID Device Details

FCC IDYE3801I
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYE3
Product Code801I
Applicant BusinessDT Research, Inc. 🇹🇼
Related Domains dtri.com
Equipment ClassMobile Tablet
Test FirmBay Area Compliance Laboratories Corp.(Dongguan)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2401.683-2470.788 MHzClass II permissive change or modification of presently authorized equipment2018-11-15
2402-2480 MHzOriginal Equipment2018-02-22
2401.683-2470.788 MHzOriginal Equipment2018-02-22
5180-5240 MHzOriginal Equipment2018-02-22
706.5-713.5 MHzOriginal Equipment2018-02-22

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2018-02-22PDF 845.1 KB
Users ManualUsers Manual2018-02-22PDF 845.1 KB
Int PhotosInternal Photos2018-11-15PDF 1.5 MB
Int PhotosInternal Photos2018-02-22PDF 2.8 MB
Ext PhotosExternal Photos2018-02-22PDF 615.2 KB
FCC ID LabelID Label/Location Info2018-02-22PDF 74.1 KB
Setup PhotosTest Setup Photos2018-11-15PDF 172.1 KB
Setup PhotosTest Setup Photos2018-02-22PDF 172.5 KB
Setup PhotosTest Setup Photos2018-02-22PDF 246.6 KB
Setup PhotosTest Setup Photos2018-02-22PDF 172.6 KB
Test ReportTest Report2018-11-15PDF 599.8 KB
Test ReportTest Report2018-02-22PDF 1.4 MB
Test ReportTest Report2018-02-22PDF 5.9 MB
Test ReportTest Report2018-02-22PDF 4.7 MB
Test ReportTest Report2018-02-22PDF 1.7 MB
Test Report (DFS)Test Report2018-02-22PDF 507.1 KB
C2PC LetterCover Letter(s)2018-11-15PDF 77.2 KB
POACover Letter(s)2018-11-15PDF 31.1 KB
Confidentiality LetterCover Letter(s)2018-02-22PDF 150.4 KB
POACover Letter(s)2018-02-22PDF 18.3 KB
SAR ReportRF Exposure Info2018-02-22PDF 1.3 MB
SAR Report Appendix 1RF Exposure Info2018-02-22PDF 3.3 MB
SAR Report Appendix 2RF Exposure Info2018-02-22PDF 2.6 MB
SAR Report Appendix 3RF Exposure Info2018-02-22PDF 2.2 MB
Block Diagram Metadata onlyBlock DiagramPDF 23.1 KB
Schematics Metadata onlySchematicsPDF 2.2 MB
Schemtics Metadata onlySchematicsPDF 2.2 MB
Operation Description Metadata onlyOperational DescriptionPDF 1,010.1 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 50.9 KB
Tune up Procedure Metadata onlyParts List/Tune Up InfoPDF 263.9 KB

Application Information

Application IDeyan/I91no0VS80jLJPQ7w==
Final Action Date2018-11-15
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019830793
Model801I
Frequency Range2401.683-2470.788 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionMobile Tablet
Responsible PartyJS Hsu, js_hsu@dtri.com , 886-2-2298-1039
Test FirmDavid Zhang, Bay Area Compliance Laboratories Corp.(Dongguan), qa.dg@baclcorp.com , 0086 0769 86858888
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is peak conducted. The long range hopping transmitter is restricted for use in mobile exposure conditions, and must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. The highest reported SAR for body-worn accessory, and simultaneous transmission use conditions are 0.05 W/kg, and 0.30 W/kg, respectively. Class II Permissive Change.

Applications

Application IDDatePurpose
eyan/I91no0VS80jLJPQ7w==2018-11-15Class II permissive change or modification of presently authorized equipment
OEyCeg2P90Pnqh+xJp59dg==2018-02-22Original Equipment
HmzSEi6y6RUDWnZ1Y5sgTA==2018-02-22Original Equipment
CzBDPvZlZ9x+JzSYcuN8+g==2018-02-22Original Equipment
AfEjtkpF6B3jVnSxJgJyAg==2018-02-22Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
706.5-713.5 MHz0.0792.5ppm4M53G7D27
706.5-713.5 MHz0.0652.5ppm4M53D7W27
709-711 MHz0.0712.5ppm9M10G7D27
709-711 MHz0.0632.5ppm9M10D7W27
779.5-784.5 MHz0.1072.5ppm4M53G7D27
779.5-784.5 MHz0.12.5ppm4M55D7W27
782 MHz0.1072.5ppm9M06G7D27
782 MHz0.0952.5ppm9M06D7W27
826.5-846.5 MHz0.2042.5ppm4M53G7D22H
826.5-846.5 MHz0.1822.5ppm4M53D7W22H
829-844 MHz0.1622.5ppm9M10G7D22H
829-844 MHz0.1512.5ppm9M06D7W22H
1710.7-1754.3 MHz0.2092.5ppm1M11G7D27
1710.7-1754.3 MHz0.1952.5ppm1M12D7W27
1720-1745 MHz0.1452.5ppm18M1G7D27
1720-1745 MHz0.1412.5ppm18M1D7W27
1851.25-1908.75 MHz0.1912.5ppm1M28F9W24E
1851.5-1908.5 MHz0.2452.5ppm2M77G7D24E
1851.5-1908.5 MHz0.2342.5ppm2M75D7W24E
1852.4-1907.6 MHz0.1952.5ppm4M21F9W24E
1852.5-1907.5 MHz0.2512.5ppm4M55G7D24E
1852.5-1907.5 MHz0.1952.5ppm4M53D7W24E
1860-1900 MHz0.1952.5ppm18M0D7W24E
1860-1900 MHz0.2092.5ppm18M0G7D24E
2401.683-2470.788 MHz0.04515CCC
2402-2480 MHz0.00415CCC
2402-2480 MHz0.000815CCC
2412-2462 MHz0.4515CCC, MO
5180-5240 MHz0.02815E38, CC, MO
5260-5320 MHz0.02715E38, CC, MO, ND
5500-5720 MHz0.02715E38, CC, MO, ND
5745-5825 MHz0.02715E38, CC, MO

Grants

TCB Grant - Application OEyCeg2P90Pnqh+xJp59dg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/22/2018

Application Dated: 02/22/2018
DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
 
Attention: JS Hsu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3801I
Name of Grantee:  DT Research, Inc.
Equipment Class: Digital Transmission System
Notes: Mobile Tablet
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  
CC MO 15C 2412.0  -  2462.0 0.45  

Output power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except for the co-location described in this filing. SAR compliance for body-worn accessory operation is based on the use of accessories that do not contain metallic components in the assembly. End-user and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR values for body-worn, wireless router and simultaneous transmission exposure conditions are 0.43 W/Kg, 1.58 W/Kg, and 1.58 W/Kg, respectively. This device supports 20 MHz and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application OEyCeg2P90Pnqh+xJp59dg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
  Date of Grant: 02/22/2018

Application Dated: 02/22/2018
 
Attention: JS Hsu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3801I
Name of Grantee:  DT Research, Inc.
Equipment Class: Digital Transmission System
Notes: Mobile Tablet
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  
CC MO 15C 2412.0  -  2462.0 0.45  

Output power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except for the co-location described in this filing. SAR compliance for body-worn accessory operation is based on the use of accessories that do not contain metallic components in the assembly. End-user and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR values for body-worn, wireless router and simultaneous transmission exposure conditions are 0.43 W/Kg, 1.58 W/Kg, and 1.58 W/Kg, respectively. This device supports 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application HmzSEi6y6RUDWnZ1Y5sgTA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/22/2018

Application Dated: 02/22/2018
DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
 
Attention: JS Hsu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3801I
Name of Grantee:  DT Research, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Tablet
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC 15C 2401.683  -  2470.788 0.045  

Output power listed is peak conducted. The long range hopping transmitter is restricted for use in mobile exposure conditions, and must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. The highest reported SAR for body-worn accessory, and simultaneous transmission use conditions are 0.05 W/kg, and 0.30 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application HmzSEi6y6RUDWnZ1Y5sgTA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
  Date of Grant: 02/22/2018

Application Dated: 02/22/2018
 
Attention: JS Hsu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3801I
Name of Grantee:  DT Research, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Tablet
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC 15C 2401.683  -  2470.788 0.045  

Output power listed is peak conducted. The long range hopping transmitter is restricted for use in mobile exposure conditions, and must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. The highest reported SAR for body-worn accessory, and simultaneous transmission use conditions are 0.05 W/kg, and 0.30 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application eyan/I91no0VS80jLJPQ7w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 11/15/2018

Application Dated: 11/15/2018
DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
 
Attention: JS Hsu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3801I
Name of Grantee:  DT Research, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Tablet
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC 15C 2401.683  -  2470.788 0.045  

Output power listed is peak conducted. The long range hopping transmitter is restricted for use in mobile exposure conditions, and must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. The highest reported SAR for body-worn accessory, and simultaneous transmission use conditions are 0.05 W/kg, and 0.30 W/kg, respectively.

Class II Permissive Change.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application eyan/I91no0VS80jLJPQ7w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
  Date of Grant: 11/15/2018

Application Dated: 11/15/2018
 
Attention: JS Hsu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3801I
Name of Grantee:  DT Research, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Tablet
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC 15C 2401.683  -  2470.788 0.045  

Output power listed is peak conducted. The long range hopping transmitter is restricted for use in mobile exposure conditions, and must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. The highest reported SAR for body-worn accessory, and simultaneous transmission use conditions are 0.05 W/kg, and 0.30 W/kg, respectively.

Class II Permissive Change.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application CzBDPvZlZ9x+JzSYcuN8+g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/22/2018

Application Dated: 02/22/2018
DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
 
Attention: JS Hsu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3801I
Name of Grantee:  DT Research, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Tablet
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.028  
38 CC MO ND 15E 5260.0  -  5320.0 0.027  
38 CC MO ND 15E 5500.0  -  5720.0 0.027  
38 CC MO 15E 5745.0  -  5825.0 0.027  

conjunction with any other antenna or transmitter, except for the co-location described in this filing. SAR compliance for body-worn accessory operation is based on the use of accessories that do not contain metallic components in the assembly. End-user and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR values for body-worn, wireless router and simultaneous transmission exposure conditions are 0.96 W/Kg, 1.58 W/Kg, and 1.58 W/Kg, respectively. This device supports 20 MHz, 40 MHz, and 80 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application CzBDPvZlZ9x+JzSYcuN8+g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
  Date of Grant: 02/22/2018

Application Dated: 02/22/2018
 
Attention: JS Hsu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3801I
Name of Grantee:  DT Research, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Tablet
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.028  
38 CC MO ND 15E 5260.0  -  5320.0 0.027  
38 CC MO ND 15E 5500.0  -  5720.0 0.027  
38 CC MO 15E 5745.0  -  5825.0 0.027  

conjunction with any other antenna or transmitter, except for the co-location described in this filing. SAR compliance for body-worn accessory operation is based on the use of accessories that do not contain metallic components in the assembly. End-user and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR values for body-worn, wireless router and simultaneous transmission exposure conditions are 0.96 W/Kg, 1.58 W/Kg, and 1.58 W/Kg, respectively. This device supports 20 MHz, 40 MHz, and 80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application AfEjtkpF6B3jVnSxJgJyAg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/22/2018

Application Dated: 02/22/2018
DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
 
Attention: JS Hsu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3801I
Name of Grantee:  DT Research, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Mobile Tablet
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.066 2.5  PM 1M29F9W
22H 826.4  -  846.6 0.074 2.5  PM 4M17F9W
24E 1851.25  -  1908.75 0.191 2.5  PM 1M28F9W
24E 1852.4  -  1907.6 0.195 2.5  PM 4M21F9W
24E 1851.5  -  1908.5 0.245 2.5  PM 2M77G7D
24E 1851.5  -  1908.5 0.234 2.5  PM 2M75D7W
24E 1852.5  -  1907.5 0.251 2.5  PM 4M55G7D
24E 1852.5  -  1907.5 0.195 2.5  PM 4M53D7W
24E 1860.0  -  1900.0 0.209 2.5  PM 18M0G7D
24E 1860.0  -  1900.0 0.195 2.5  PM 18M0D7W
27 1710.7  -  1754.3 0.209 2.5  PM 1M11G7D
27 1710.7  -  1754.3 0.195 2.5  PM 1M12D7W
27 1720.0  -  1745.0 0.145 2.5  PM 18M1G7D
27 1720.0  -  1745.0 0.141 2.5  PM 18M1D7W
22H 826.5  -  846.5 0.204 2.5  PM 4M53G7D
22H 826.5  -  846.5 0.182 2.5  PM 4M53D7W
22H 829.0  -  844.0 0.162 2.5  PM 9M10G7D
22H 829.0  -  844.0 0.151 2.5  PM 9M06D7W
27 779.5  -  784.5 0.107 2.5  PM 4M53G7D
27 779.5  -  784.5 0.1 2.5  PM 4M55D7W
27 782.0  -  782.0 0.107 2.5  PM 9M06G7D
27 782.0  -  782.0 0.095 2.5  PM 9M06D7W
27 706.5  -  713.5 0.079 2.5  PM 4M53G7D
27 706.5  -  713.5 0.065 2.5  PM 4M53D7W
27 709.0  -  711.0 0.071 2.5  PM 9M10G7D
27 709.0  -  711.0 0.063 2.5  PM 9M10D7W

Output power listed is ERP for operations below 1 GHz and EIRP for operations above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2 & Band 4, 1.4/3/5/10 MHz BW modes in Band 5, and 5/10 MHz BW modes in Band 13 & Band 17. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except for the co-location described in this filing. SAR compliance for body-worn accessory operation is based on the use of accessories that do not contain metallic components in the assembly. End-user and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR values for body-worn, wireless router and simultaneous transmission exposure conditions across all filings are 1.21 W/Kg, 1.58 W/Kg, and 1.58 W/Kg, respectively.

This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.


EAS Grant - Application AfEjtkpF6B3jVnSxJgJyAg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DT Research, Inc.
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
NEW TAIPEI,
Taiwan
  Date of Grant: 02/22/2018

Application Dated: 02/22/2018
 
Attention: JS Hsu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YE3801I
Name of Grantee:  DT Research, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Mobile Tablet
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.066 2.5  PM 1M29F9W
22H 826.4  -  846.6 0.074 2.5  PM 4M17F9W
24E 1851.25  -  1908.75 0.191 2.5  PM 1M28F9W
24E 1852.4  -  1907.6 0.195 2.5  PM 4M21F9W
24E 1851.5  -  1908.5 0.245 2.5  PM 2M77G7D
24E 1851.5  -  1908.5 0.234 2.5  PM 2M75D7W
24E 1852.5  -  1907.5 0.251 2.5  PM 4M55G7D
24E 1852.5  -  1907.5 0.195 2.5  PM 4M53D7W
24E 1860.0  -  1900.0 0.209 2.5  PM 18M0G7D
24E 1860.0  -  1900.0 0.195 2.5  PM 18M0D7W
27 1710.7  -  1754.3 0.209 2.5  PM 1M11G7D
27 1710.7  -  1754.3 0.195 2.5  PM 1M12D7W
27 1720.0  -  1745.0 0.145 2.5  PM 18M1G7D
27 1720.0  -  1745.0 0.141 2.5  PM 18M1D7W
22H 826.5  -  846.5 0.204 2.5  PM 4M53G7D
22H 826.5  -  846.5 0.182 2.5  PM 4M53D7W
22H 829.0  -  844.0 0.162 2.5  PM 9M10G7D
22H 829.0  -  844.0 0.151 2.5  PM 9M06D7W
27 779.5  -  784.5 0.107 2.5  PM 4M53G7D
27 779.5  -  784.5 0.1 2.5  PM 4M55D7W
27 782.0  -  782.0 0.107 2.5  PM 9M06G7D
27 782.0  -  782.0 0.095 2.5  PM 9M06D7W
27 706.5  -  713.5 0.079 2.5  PM 4M53G7D
27 706.5  -  713.5 0.065 2.5  PM 4M53D7W
27 709.0  -  711.0 0.071 2.5  PM 9M10G7D
27 709.0  -  711.0 0.063 2.5  PM 9M10D7W

Output power listed is ERP for operations below 1 GHz and EIRP for operations above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2 & Band 4, 1.4/3/5/10 MHz BW modes in Band 5, and 5/10 MHz BW modes in Band 13 & Band 17. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except for the co-location described in this filing. SAR compliance for body-worn accessory operation is based on the use of accessories that do not contain metallic components in the assembly. End-user and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR values for body-worn, wireless router and simultaneous transmission exposure conditions across all filings are 1.21 W/Kg, 1.58 W/Kg, and 1.58 W/Kg, respectively.

This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.



Mail To: