FCC ID YETCELFI-RS225WUA

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Nextivity Incorporated 16550 West Bernardo Drive, Bldg 5, Suite 550 San Diego, CA 92127 United States

Date of Grant: 04/02/2014 Application Dated: 03/03/2014

Attention: Michiel Lotter , Vice President, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	YETCELFI-RS225WUA
Name of Grantee:	Nextivity Incorporated
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	AT&T Provider Specific Consumer Signal Booster
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5198.4  -  5248.8	0.037
ND	15E	5268.0  -  5301.6	0.046

Power listed is conducted at the antenna terminals. Operation in 5.15-5.25 GHz band is authorized for indoor use only. This device is part of a booster system operated with FCC ID YETCELFI-RS225CUA. This booster system device shall be operated with frequency selection by network identification and interference avoidance for wireless subsystems as described in this filing for compliance with 20.21(e)(9) and 20.21(e)(7). Users and installers must be provided with the antenna kitting and installation and operating instructions and conditions for satisfying RF exposure and 47 CFR 20.21(a) compliance. This Provider-Specific Fixed Consumer Signal Booster system is approved for operating with the coverage-unit antenna installed at a fixed location inside a building. This Consumer Signal Booster is authorized only for operation by and marketing to members of the general public for their personal use in accordance with the requirements of 47 CFR 20.21(a).

ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application DWq5u+h2uXkdm9mDOVmwMA==

EAS Grant - Application DWq5u+h2uXkdm9mDOVmwMA==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Nextivity Incorporated 16550 West Bernardo Drive, Bldg 5, Suite 550 San Diego, CA 92127 United States

Date of Grant: 04/02/2014 Application Dated: 03/03/2014

Attention: Michiel Lotter , Vice President, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	YETCELFI-RS225WUA
Name of Grantee:	Nextivity Incorporated
Equipment Class:	Part 20 Provider-Specific Consumer Booster (CMRS)
Notes:	AT&T Provider Specific Consumer Signal Booster
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	824.0  -  849.0	0.0708	0E-10  PM	F9W
	24E	1850.0  -  1915.0	0.288	4.9  PM	F9W

Power listed is radiated; maximum reported EIRP is 0.0708 W for part 22 and 0.288 W for part 24. This device is part of a booster system operated with FCC ID YETCELFI-RS225CUA. This booster system device shall be operated with frequency selection by network identification and interference avoidance for wireless subsystems as described in this filing for compliance with 20.21(e)(9) and 20.21(e)(7). Users and installers must be provided with the antenna kitting and installation and operating instructions and conditions for satisfying RF exposure and 47 CFR 20.21(a) compliance. This Provider-Specific Fixed Consumer Signal Booster system is approved for operating with the coverage-unit antenna installed at a fixed location inside a building. This Consumer Signal Booster is authorized only for operation by and marketing to members of the general public for their personal use in accordance with the requirements of 47 CFR 20.21(a).

Mail To: