FCC ID YETF41-8XCU

Signal Booster

by Nextivity Incorporated

Grantee Code: YET   Product Code: F418XCU
Latest application date: 2020-06-23

FCC ID Device Details

FCC IDYETF41-8XCU
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYET
Product CodeF418XCU
Applicant BusinessNextivity Incorporated 🇺🇸
Related Domains nextivityinc.com
Equipment ClassSignal Booster
Test FirmTUV SUD America Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
729-746 MHzOriginal Equipment2020-06-23
758-768 MHzOriginal Equipment2020-06-23

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2020-12-20PDF 2.1 MB
Internal PhotosInternal Photos2020-12-20PDF 1.6 MB
External PhotosExternal Photos2020-12-20PDF 928 KB
LabelID Label/Location Info2020-06-23PDF 579.3 KB
Test Setup PhotosTest Setup Photos2020-12-20PDF 880.8 KB
Test ReportTest Report2020-06-23PDF 5.5 MB
Test ReportTest Report2020-06-23PDF 3.1 MB
Agent LetterCover Letter(s)2020-06-23PDF 116.5 KB
Authorization LetterCover Letter(s)2020-06-23PDF 26 KB
Confidentiality RequestCover Letter(s)2020-06-23PDF 210.7 KB
SAR ReportRF Exposure Info2020-06-23PDF 86.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 232.7 KB
Schematics Metadata onlySchematicsPDF 516.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 1.4 MB
Parts List Metadata onlyParts List/Tune Up InfoPDF 455.8 KB

Application Information

Application IDniFCfON5C88fSw9emCV0Sw==
Final Action Date2020-06-23
Application PurposeOriginal Equipment
Applicant FRN0019823665
ModelF41-8XCU
Frequency Range729-746 MHz
Equipment ClassB2I - Part 20 Industrial Booster (CMRS)
Device DescriptionSignal Booster
Responsible PartyMichiel Lotter, Vice President, Engineering, mlotter@nextivityinc.com , 858-485-9442
Test FirmMac Elliott, TUV SUD America Inc., William.Elliott@tuvsud.com , 813-284-2736
TCB EmailAndy.Zhang@tuvsud.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/20/2020
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is ERP for frequencies below 1 GHz and EIRP for frequencies above 1 GHz. This device operates only with device with FCC ID: YETF42-67ENU. The intended use is for industrial/commercial use and will not be sold to the general public. Professional installation is required. This in-building DAS booster system device shall be operated with frequency selection by network identification and interference avoidance for wireless subsystems as described in this filing. The antennas used with this signal booster must be installed to provide a separation distance of at least 40 cm from all persons. Users and installers must be provided with the antenna kitting and installation instructions and operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
niFCfON5C88fSw9emCV0Sw==2020-06-23Original Equipment
QXoZhMJ04uiNaz002hH8fg==2020-06-23Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
729-746 MHz0.28AmpF9W27
758-768 MHz0.17AmpF9W9
768-775 MHz1.31AmpF9W9
851-861 MHz2.58AmpF9W9
1930-1990 MHz0.57AmpF9W24E
2110-2155 MHz0.64AmpF9W27

Grants

TCB Grant - Application QXoZhMJ04uiNaz002hH8fg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
Date of Grant: 06/23/2020

Application Dated: 06/19/2020
Nextivity Incorporated
16550 West Bernardo Drive, Bldg 5, Suite 550
San Diego, CA 92127
 
Attention: Michiel Lotter , Vice President, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YETF41-8XCU
Name of Grantee:  Nextivity Incorporated
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: Signal Booster
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 758.0  -  768.0 0.17  Amp F9W
90 768.0  -  775.0 1.31  Amp F9W
90 851.0  -  861.0 2.58  Amp F9W

Output power listed is ERP. This device operates only with device with FCC ID: YETF42-67ENU. The intended use is for industrial/commercial use and will not be sold to the general public. Professional installation is required. This in-building DAS booster system device shall be operated with frequency selection by network identification and interference avoidance for wireless subsystems as described in this filing. The antennas used with this signal booster must be installed to provide a separation distance of at least 40 cm from all persons. Users and installers must be provided with the antenna kitting and installation instructions and operating conditions for satisfying RF exposure compliance.

EAS Grant - Application QXoZhMJ04uiNaz002hH8fg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nextivity Incorporated
16550 West Bernardo Drive, Bldg 5, Suite 550
San Diego, CA 92127
United States
  Date of Grant: 06/23/2020

Application Dated: 06/19/2020
 
Attention: Michiel Lotter , Vice President, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YETF41-8XCU
Name of Grantee:  Nextivity Incorporated
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: Signal Booster
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 758.0  -  768.0 0.17  Amp F9W
90 768.0  -  775.0 1.31  Amp F9W
90 851.0  -  861.0 2.58  Amp F9W

Output power listed is ERP. This device operates only with device with FCC ID: YETF42-67ENU. The intended use is for industrial/commercial use and will not be sold to the general public. Professional installation is required. This in-building DAS booster system device shall be operated with frequency selection by network identification and interference avoidance for wireless subsystems as described in this filing. The antennas used with this signal booster must be installed to provide a separation distance of at least 40 cm from all persons. Users and installers must be provided with the antenna kitting and installation instructions and operating conditions for satisfying RF exposure compliance.



TCB Grant - Application niFCfON5C88fSw9emCV0Sw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
Date of Grant: 06/23/2020

Application Dated: 06/19/2020
Nextivity Incorporated
16550 West Bernardo Drive, Bldg 5, Suite 550
San Diego, CA 92127
 
Attention: Michiel Lotter , Vice President, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YETF41-8XCU
Name of Grantee:  Nextivity Incorporated
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: Signal Booster
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2110.0  -  2155.0 0.64  Amp F9W
27 729.0  -  746.0 0.28  Amp F9W
24E 1930.0  -  1990.0 0.57  Amp F9W

Output power listed is ERP for frequencies below 1 GHz and EIRP for frequencies above 1 GHz. This device operates only with device with FCC ID: YETF42-67ENU. The intended use is for industrial/commercial use and will not be sold to the general public. Professional installation is required. This in-building DAS booster system device shall be operated with frequency selection by network identification and interference avoidance for wireless subsystems as described in this filing. The antennas used with this signal booster must be installed to provide a separation distance of at least 40 cm from all persons. Users and installers must be provided with the antenna kitting and installation instructions and operating conditions for satisfying RF exposure compliance.

EAS Grant - Application niFCfON5C88fSw9emCV0Sw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nextivity Incorporated
16550 West Bernardo Drive, Bldg 5, Suite 550
San Diego, CA 92127
United States
  Date of Grant: 06/23/2020

Application Dated: 06/19/2020
 
Attention: Michiel Lotter , Vice President, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YETF41-8XCU
Name of Grantee:  Nextivity Incorporated
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: Signal Booster
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2110.0  -  2155.0 0.64  Amp F9W
27 729.0  -  746.0 0.28  Amp F9W
24E 1930.0  -  1990.0 0.57  Amp F9W

Output power listed is ERP for frequencies below 1 GHz and EIRP for frequencies above 1 GHz. This device operates only with device with FCC ID: YETF42-67ENU. The intended use is for industrial/commercial use and will not be sold to the general public. Professional installation is required. This in-building DAS booster system device shall be operated with frequency selection by network identification and interference avoidance for wireless subsystems as described in this filing. The antennas used with this signal booster must be installed to provide a separation distance of at least 40 cm from all persons. Users and installers must be provided with the antenna kitting and installation instructions and operating conditions for satisfying RF exposure compliance.



Mail To: